Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.033 kg |
| Voltage | 24 V |
| Number of Connectors / Ports | 4 |
| Function | Relay, coolant level warning light |
| Type | Relay, coolant level warning light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.04
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| Weight | 0.518 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 153 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.04
Important compatibility info
| Width | 182 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Length | 358 mm |
| Height | 83 mm |
| Function | Air Filter |
| Weight | 0.41 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.04
Important compatibility info
| Type | Tie Rod Axle Joint |
| Function | Tie Rod Axle Joint |
| Weight | 0.460 kg |
| Thread Length | 62 mm. 14.5 mm |
| Driver Position | for left-hand drive vehicles |
| Outer thread | M14 x 2 mm, M14 x 1,5 mm |
| Spanner Size | 13, 32 |
| Outer diameter | 12.0 mm |
| Material | Steel |
| Length | 280 mm |
| Placement on Vehicle | Front Axle left or right |
£14.04
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 485 mm |
| Housing Diameter | 18 mm |
| Eject Force | 450 N |
| Stroke | 200 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 263.5 mm |
| Weight | 0.260 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.04
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Additional Information | with lock nut |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 95 mm |
| Paired article numbers | 172722 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Weight | 0.401 kg |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Notches / Holes Number | 1 |
| Weight | 0.077 kg |
| Valve stem diameter | 8 mm |
| Function | Intake Valve |
| Length | 125.8 mm |
| Type | Intake Valve |
| Valve head diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Thickness/Strength 1 | 18.6 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Width | 51.2 mm. 54.2 mm |
| Length | 151.4 mm. 150.4 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.1 kg |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Weight | 0.156 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 100 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 2 | 77 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
£14.05
Important compatibility info
| Weight | 0.082 kg |
| Length | 96.9 mm |
| Notches / Holes Number | 3 |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
| for OE number | 028 109 611 G |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.401 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 95 mm |
| Paired article numbers | 172723 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Weight | 0.13 kg |
| Width | 16 mm |
| Outer diameter | 55 mm |
| Inner diameter | 30 mm |
| Function | Bearing, propshaft centre bearing |
| Type | Bearing, propshaft centre bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Type | Exhaust Valve |
| Function | Exhaust Valve |
| Valve stem diameter | 6 mm |
| Notches / Holes Number | 3 |
| Weight | 0.042 kg |
| Valve head diameter | 42 mm |
| Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Weight | 0.147 kg |
| Type | Intake Valve |
| Function | Intake Valve |
| Notches / Holes Number | 1 |
| Valve head diameter | 45.5 mm |
| Valve stem diameter | 8.95 mm |
| Length | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.05
Important compatibility info
| Thickness | 11 mm |
| Placement on Vehicle | frontal sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.052 kg |
| Inner diameter | 78 mm |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Opening Pressure | 1.2 bar |
| Type | Cap, coolant tank |
| Material | Plastic |
| for OE number | 21360115 |
| Function | Cap, coolant tank |
| Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.035 kg |
| Length | 396 mm |
| Height | 38 mm |
| Width | 177 mm |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Weight | 0.017 kg |
| Type | Stop Light Switch |
| Housing Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 145 mm |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 98 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 0.25 kg |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Weight | 0.264 kg |
| Additional Information 2 | with oil sump gasket |
| Height | 46 mm |
| Length | 244 mm |
| Width | 152 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Right |
| Length | 362 mm |
| Width | 165 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 80 |
| Function | Nut, kingpin |
| Thickness | 21.6 mm |
| Type | Nut, kingpin |
| Weight | 0.277 kg |
| Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Number of Connectors / Ports | 2 |
| Switch Point | 92 °C. 97 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.255 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1351.RE SK |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.665 kg |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 16 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 100 mm |
| Material | Rubber |
| Inner diameter 2 | 70 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.251 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100429)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£14.06
Important compatibility info
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Weight | 0.07 kg |
| Width | 17 mm |
| Number of Teeth | 95 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Length | 110 mm |
| Thickness | 68 mm |
| Spanner Size | 17 |
| Paired article numbers | 42721 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.4 kg |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.030 kg |
| Thickness | 54 mm |
| Spanner Size | 19 |
| Number of Connectors / Ports | 1 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 006 542 34 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without ball bearing |
| Inner diameter | 11 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 22986 |
| Weight | 0.28 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Hole Spacing | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023