Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.115 kg |
| Function | Hydraulic Hose, steering |
| Placement on Vehicle | from fluid reservoir to hydraulic pump |
| Length | 352 mm |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 0.037 kg |
| Type | Finger Follower, engine timing |
| Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Cone Size | 21.8 mm |
| Mounting points diameter | 10.3 mm |
| Additional Information | with fastening/mounting material |
| Weight | 1.740 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M20 x 1,5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.148 kg |
| Length | 168 mm |
| Additional Information 2 | with seal ring |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.035 kg |
| Thickness | 61.65 mm |
| Spanner Size | 22 |
| Number of Connectors / Ports | 2 |
| Thread Pitch | 1.5 mm |
| Function | Switch, reverse light |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Weight | 0.10 kg |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.483 kg |
| Length | 260 mm |
| Height | 40 mm |
| Width | 244 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 168 mm |
| Thickness | 12.5 mm |
| Outer diameter | 202 mm |
| Material | Steel |
| Type | Sensor Ring, ABS |
| Weight | 0.185 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 196 mm |
| Function | Inner Tie Rod |
| Weight | 0.420 kg |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Length | 1376 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.187 kg |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Function | Air Filter |
| Length | 306 mm |
| Weight | 0.31 kg |
| Type | Air Filter |
| Height | 23 mm |
| Width | 273 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.33 kg |
| Placement on Vehicle | Wheel Side, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 51 mm |
| Inner diameter 1 | 31 mm |
| Type | Bellow Kit, drive shaft |
| Length | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36555)
- 2x Febi High Temperature Lubricant (03630)
£14.75
Important compatibility info
| Weight | 0.450 kg |
| Paired article numbers | 11999 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.250 kg |
| Placement on Vehicle | both sides |
| Length | 493 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 181 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 278.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.155 kg |
| Material | Plastic |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 651 200 02 70 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Paired article numbers | 11998 |
| Weight | 0.450 kg |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.89 kg |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 210 mm |
| Material | Steel |
| Paired article numbers | 32192 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.450 kg |
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1560 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Length | 1558 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.150 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from thermostat to radiator |
| Placement on Vehicle | Upper |
| Type | Radiator Hose |
| Weight | 0.133 kg |
| Additional Information 2 | with quick couplers |
| Hose Length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023