Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.730 kg |
| Placement on Vehicle | Rear Axle |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.13
Important compatibility info
| Weight | 0.192 kg |
| Height | 126 mm |
| Outer diameter | 86 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.13
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 9 mm |
| Outer diameter | 114 mm |
| Inner diameter | 96 mm |
| Function | Shaft Seal, crankshaft |
| Weight | 0.041 kg |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.13
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Cone Size | 19 mm |
| Weight | 0.821 kg |
| Steering arm type | for control arm |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.13
Important compatibility info
| Weight | 0.117 kg |
| Length | 200 mm |
| Outer diameter | 88 mm |
| Spanner Size | 32 |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.13
Important compatibility info
| Weight | 0.172 kg |
| Length | 1687 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Weight | 0.30 kg |
| Length | 187 mm |
| Type | Air Filter |
| Inner diameter | 91 mm |
| Outer diameter | 158 mm |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Weight | 0.17 kg |
| Length | 1670 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Material | Thermoplast |
| Inner diameter 2 | 71 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Length | 93 mm |
| Inner diameter 1 | 36 mm |
| Weight | 0.272 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100346)
- 1x Febi Clamping Clip (100579)
- 1x Febi Clamping Clip (45643)
- 2x Febi Molybdenum Grease (02582)
£15.14
Important compatibility info
| Function | Filter, cabin air |
| Length | 262 mm |
| Height | 35 mm |
| Width | 173 mm |
| Filter type | with antibacterial action, Activated Carbon Filter |
| Weight | 0.20 kg |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 130 mm |
| Material | Rubber/Metal |
| Outer diameter | 40 mm |
| Thickness | 40 mm |
| Inner diameter | 16 mm. 20 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.358 kg |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 40 mm. 70 mm |
| Thickness | 28 mm. 76 mm |
| Inner diameter | 34 mm |
| Function | Bushing, axle beam |
| Weight | 0.450 kg |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.355 kg |
| Paired article numbers | 34546 |
| Length | 71 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right, Lower, Rear |
| Material | Rubber/Metal |
| Outer diameter | 76 mm |
| Thickness | 80 mm |
| Inner diameter | 16 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Weight | 0.449 kg |
| Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Weight | 0.128 kg |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Voltage | 12 V |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Weight | 0.395 kg |
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, driver cab (35470)
- 1x Febi Bush, driver cab suspension (49869)
- 1x Febi Nut (24101)
- 1x Febi Screw (104261)
£15.14
Important compatibility info
| Weight | 1.098 kg |
| Placement on Vehicle | Rear Axle |
| Length | 115.7 mm |
| Width | 51.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.6 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Length | 71 mm |
| Paired article numbers | 34545 |
| Weight | 0.3 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.14
Important compatibility info
| Weight | 0.209 kg |
| Length | 108 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 87 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174422)
- 1x Febi High Temperature Lubricant (03630)
£15.14
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 87 mm |
| Material | Rubber |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 79 mm |
| Weight | 0.203 kg |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
£15.15
Important compatibility info
| Weight | 0.042 kg |
| Material | Steel |
| Type | Gasket, exhaust manifold |
| Function | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.15
Important compatibility info
| Weight | 0.070 kg |
| Additional Information | with gaskets/seals |
| Height | 90 mm |
| Outer diameter | 88 mm |
| Inner diameter | 25 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.15
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Additional Information | with lock nut |
| Weight | 0.816 kg |
| Internal Thread Size | M16 x 1 |
| Placement on Vehicle | Front Axle Right |
| Length | 224 mm |
| Paired article numbers | 172483 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 31 mm |
| Width | 59 mm |
| Material | Rubber |
| Thickness | 56 mm |
| Inner diameter | 22 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.08 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.16
Important compatibility info
| Weight | 0.184 kg |
| Placement on Vehicle | Rear Axle |
| Length | 52 mm |
| Width | 101 mm |
| Material | Rubber/Metal |
| Thickness | 37 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.16
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1 |
| Placement on Vehicle | Front Axle Left |
| Length | 224 mm |
| Paired article numbers | 172484 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Weight | 0.816 kg |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.16
Important compatibility info
| Weight | 0.300 kg |
| Placement on Vehicle | both sides |
| Length | 514 mm |
| Housing Diameter | 19 mm |
| Eject Force | 500 N |
| Stroke | 215 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 279 mm |
| Replaces | 27657 |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 169.5 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Weight | 0.545 kg |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.17
Important compatibility info
| Weight | 0.21 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 8 |
| Length | 1495 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.17
Important compatibility info
| Type | Valve, crankcase ventilation |
| Colour | Black |
| Weight | 0.043 kg |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023