Towing & Security

• Easy to install, with pre-cast fixing holes
• Suitable for towing trailers of up to 3.5T
• Direct equivalent to MP082
• D Value = 20.2Kn. S Value = 350kg
• Approved to Reg 55

• Complies with ISO 11446
• Supplied with socket seal
• Supplied in retail display packaging
• If in doubt about your caravan or trailer wiring consult your caravan dealer or auto electrician

• Slim line oval design for trailer applications
• Universal mounting
• 22cm cable

• Constructed for standard duty applications such as boat trailers
• Height extension range 240mm
• Wire handle with grip
• Wide pneumatic tyre prevents sinkage into soft ground and is easy to use on gravel surfaces
• Clear zinc plate finish

• NO CLAMP PROVIDED

• Constructed for standard duty applications such as boat trailers
• Height extension range 240mm
• Wire handle with grip
• Wide pneumatic tyre prevents sinkage into soft ground and is easy to use on gravel surfaces
• Clear zinc plate finish

• NO CLAMP PROVIDED

• 13 inch trailer mudguard
• Injection moulded in durable black high density polyethylene
• Dimensions: 770 x 200 x 330mm

• Fitted at the rear of the vehicle the relay gives an audible signal that is in sequence with the towed vehicle's indicators
• Easy to read standard colour codes
• Instructions included
• Easy to conceal within the vehicle
• Excellent sound clarity
• Made in the UK

• Suitable for a wide range of vehicles
• Can be used on either 12 or 24V vehicles
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• 40 x 3W LEDs
• Very low power consumption
• Reverse polarity protection
• Operating temperature of -30deg.C to +50deg.C
• EMC R10 approved
• Ingress protection to IP56

• Suitable for a wide range of vehicles
• Can be used on either 12 or 24V vehicles
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• 40 x 3W LEDs
• Very low power consumption
• Reverse polarity protection
• Operating temperature of -30deg.C to +50deg.C
• EMC R10 approved
• Ingress protection to IP56

• Suitable for a wide range of vehicles
• Can be used on either 12 or 24V vehicles
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• 40 x 3W LEDs
• Very low power consumption
• Reverse polarity protection
• Operating temperature of -30deg.C to +50deg.C
• EMC R10 approved
• Ingress protection to IP56

• Suitable for a wide range of vehicles
• Can be used on either 12 or 24V vehicles
• 40x3w LED
• Very low power consumption
• 3 selectable flash patterns - 360° rotating, low speed strobe and high speed strobe
• EMC R10 approved
• Reverse polarity protection
• Ingress protection to IP56
• Operating temperature of -30°C to +50°C

• Suitable for a wide range of vehicles
• Can be used on either 12 or 24V vehicles
• 40x3w LED
• Very low power consumption
• 3 selectable flash patterns - 360° rotating, low speed strobe and high speed strobe
• EMC R10 approved
• Reverse polarity protection
• Ingress protection to IP56
• Operating temperature of -30°C to +50°C

• Mini LED beacon light bar is suitable for cars, vans, large vans, recovery vehicles and 4x4 vehicles
• 250mm in length
• 30 x 3W high intensity long life LED's
• 26 x flash patterns
• Waterproof and dust proof to IP65
• ECE R65 and EMC R10 approved
• Tough polycarbonate lens
• Operating temperature -30° to +60°
• Can be used on either 12V or 24V vehicles
• 360° visibility
• Amber light output
• Low profile design

• Mini LED beacon light bar is suitable for cars, vans, large vans, recovery vehicles and 4x4 vehicles
• 250mm in length
• 30 x 3W high intensity long life LED's
• 26 x flash patterns
• Waterproof and dust proof to IP65
• ECE R65 and EMC R10 approved
• Tough polycarbonate lens
• Operating temperature -30° to +60°
• Can be used on either 12V or 24V vehicles
• 360° visibility
• Amber light output
• Low profile design

• Aluminium housing
• Suitable for 12/24V recovery vehicles
• Multiple flash patterns
• Reverse polarity protection
• Can be synchronised with other strobes of the same type
• 4mm mounting holes

• Aluminium housing
• Suitable for 12/24V recovery vehicles
• Multiple flash patterns
• Reverse polarity protection
• Can be synchronised with other strobes of the same type
• 4mm mounting holes

• Aluminium housing
• Suitable for 12/24V recovery vehicles
• Multiple flash patterns
• Reverse polarity protection
• Can be synchronised with other strobes of the same type
• 4mm mounting holes

• Aluminium housing
• Suitable for 12/24V recovery vehicles
• Multiple flash patterns
• Reverse polarity protection
• Can be synchronised with other strobes of the same type
• 4mm mounting holes

• Constructed for standard duty applications such as boat trailers
• Height extension range 240mm
• Wire handle with grip
• Wide pneumatic tyre prevents sinkage into soft ground and is easy to use on gravel surfaces
• Clear zinc plate finish

• NO CLAMP PROVIDED

• Horizontal flat surface bracket connector
• Suitable for MP4093 beacon
• Standard mount fits other manufacturer beacons

• 90 degree vertical surface bracket connector
• Suitable for MP4093 beacon
• Standard mount fits other manufacturer beacons

• Mounting bracket suitable for MP4110 / MP4112
• Metal construction
• Black finish

• 2 EU approved combination lamps (stop/tail/indicator/numberplate)
• 2 EU approved reflective triangles
• Powerful magnets for quick and secure attachment
• 6m trailer cable fitted with a 7 pin plug
• 1.8m cable between lamps

• 2 EU approved combination lamps (stop/tail/indicator/numberplate)
• Powerful magnets for quick and secure attachment
• 6m trailer cable fitted with a 7 pin plug
• 1.8m cable between lamps

• 2 EU approved combination lamps (stop/tail/indicator/numberplate)
• Powerful magnets for quick and secure attachment
• 10m trailer cable fitted with a 7 pin plug
• 3m cable between lamps

• Powerful magnets for quick and secure attachment
• Robust steel mounting brackets
• Includes 2 x E Approved triangle reflectors and LED combination lamps (stop/tail/indicator/number plate functions)
• 10m trailer cable
• 1.8m curly connecting cable
• Suitable for agricultural use
• Lamps are IP67 waterproof and dustproof

With the secondary coupling or breakaway cable from Maypole you can tow with total confidence, knowing that your caravan or trailer will always be safe and securely attached, even in the unlikely event that it breaks away whilst towing. Made from multi strand steel cable this 1m long security cable from Maypole is strong enough for the job. The cable itself can easily attach the caravan or trailer to the towing vehicle with its hook and eye safety catch, and will be suitable for use with a wide range of caravans, trailers and vehicles. It is also a legal requirement to use a secondary coupling cable when towing an unbraked trailer.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Breakaway cable for use on caravans and brakes trailers
• 1m x 3mm
• Features a high visibility red PVC coating

• PVC breakaway cable
• Fitted with a clevis and pin instead of a split ring
• Suitable for Ifor Williams applications
• Vehicle fitting: carabiner

• High intensity long life LEDs
• Extra high daylight colour temperature of 6500K
• Waterproof and dustproof to IP67 Rating
• Anti-corrosion diecast aluminium housing
• Complete with a stainless steel mounting bracket that is easy to mount onto vehicles
• Toughened polycarbonate lens
• Low power consumption
• Lamp has CE & EMC certificates