Towing & Security

• Ingress protection to IP56
• EMC R10 approved
• Operating temperature of -30deg.C to +50deg.C
• Reverse polarity protection
• Very low power consumption
• 40 x 3W LEDs
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• Can be used on either 12 or 24V vehicles
• Suitable for a wide range of vehicles

• Ingress protection to IP56
• EMC R10 approved
• Operating temperature of -30deg.C to +50deg.C
• Reverse polarity protection
• Very low power consumption
• 40 x 3W LEDs
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• Can be used on either 12 or 24V vehicles
• Suitable for a wide range of vehicles

Grayston has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. With a wealth of experience, Grayston have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Fitting instructions supplied
• To uprate the rear suspension of cars, estates and light vans for towing caravans, trailers and vehicles carrying heavy loads
• To fit gap of 39mm to 51mm

• 1.8m cable between lamps
• 6m trailer cable fitted with a 7 pin plug
• Powerful magnets for quick and secure attachment
• 2 EU approved combination lamps (stop/tail/indicator/numberplate)

If you have a rear mounted bike rack you may be covering your number plate and vehicle lights to make sure you can be seen out on the road and are legally transporting your bikes make sure you are using a cycle carrier lighting board.

Maypole have a wide range of lighting boards for all different applications including cycle carriers. This 3 foot lighting board comes with 2meters of electrical cabling that connects to your vehicle via a 7 pin 12volt plug which will allow your lighting board to operate correctly. The lighting board comes complete with 2x four function lamps; so that includes break lights, tail lights, indicators and number plate lighting. All of the Maypole trailer lighting boards come with full E approval.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Polybag packed with barcode
• Reflectors: 2 x round
• Lamps; 2 x 4 function lamps (stop/tail/indicator/number plate)
• Electrics: 7 Pin, 12 Volt
• Cable length: 2m approx.
• Board length: 0.915m approx.
• E Approved
• Legal requirement if vehicle lighting is obstructed
• Cycle carrier lighting board