Towing & Security

Grayston has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. With a wealth of experience, Grayston have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Fitting instructions supplied
• To uprate the rear suspension of cars, estates and light vans for towing caravans, trailers and vehicles carrying heavy loads
• To fit gap of 39mm to 51mm

• 1.8m cable between lamps
• 6m trailer cable fitted with a 7 pin plug
• Powerful magnets for quick and secure attachment
• 2 EU approved combination lamps (stop/tail/indicator/numberplate)

With a clear coloured lens, the lamp uses an LED to ensure a bright white light which is highly visible to other road users. The marker lamp has also been E approved to assure you of quality and safety standard of the manufactured product. It comes with the wires required to connect the lamp to a power source. The 12V front maker lamp measures approximately 120 x 63 x 20mm (L x W x H).

Maypole was established over 40 years ago beginning with the manufacturing of trailer lighting boards and since then has grown into one of the premier companies in Europe offering ranges of products for the Towing, Trailer, Automotive Aftermarket, Leisure, Agriculture and Marine markets. The company is proud that it is still an independent and family owned business, with total focus on Customers, Quality and Service.

• Approx. size: 120 x 63 x 20mm (L x W x H)
• Legal requirement for any trailer that is over 1.6m wide
• Varivolt 12V/ 24V
• LED lamp with wires
• Clear Front Marker Lamp

If you have a rear mounted bike rack you may be covering your number plate and vehicle lights to make sure you can be seen out on the road and are legally transporting your bikes make sure you are using a cycle carrier lighting board.

Maypole have a wide range of lighting boards for all different applications including cycle carriers. This 3 foot lighting board comes with 2meters of electrical cabling that connects to your vehicle via a 7 pin 12volt plug which will allow your lighting board to operate correctly. The lighting board comes complete with 2x four function lamps; so that includes break lights, tail lights, indicators and number plate lighting. All of the Maypole trailer lighting boards come with full E approval.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and marketing of products to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Polybag packed with barcode
• Reflectors: 2 x round
• Lamps; 2 x 4 function lamps (stop/tail/indicator/number plate)
• Electrics: 7 Pin, 12 Volt
• Cable length: 2m approx.
• Board length: 0.915m approx.
• E Approved
• Legal requirement if vehicle lighting is obstructed
• Cycle carrier lighting board

• Ingress protection to IP56
• EMC R10 approved
• Operating temperature of -30deg.C to +50deg.C
• Reverse polarity protection
• Very low power consumption
• 40 x 3W LEDs
• 3 selectable flash patterns - 360 degree rotating, low speed strobe and high speed strobe
• Can be used on either 12 or 24V vehicles
• Suitable for a wide range of vehicles

• Lamp has CE & EMC certificates
• Low power consumption
• Toughened polycarbonate lens
• Complete with a stainless steel mounting bracket that is easy to mount onto vehicles
• Anti-corrosion diecast aluminium housing
• Waterproof and dustproof to IP67 Rating
• Extra high daylight colour temperature of 6500K
• High intensity long life LEDs

• 2 x 8 pin plug
• 3m x 8 core curly cable
• 13 pin Extension Lead

With this trailer specific, ready to go, pre-wired socket from Maypole you can quickly and effortlessly hook up to whatever it is you are towing and be ready for the open road. The socket itself comes pre-wired with a one and half metre wire and is pre-fixed to its mounting plate, therefore making it easy for you to fit it to your vehicle. This trailer socket is suitable for all trailers using a 12v 13 pin, N type connection. It also comes with a flexible gasket to cover the socket to keep it clean and protected. Full fitting and usage instructions are supplied with the socket.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Mounting plate
• 1.5m 12 core cable
• 13 pin socket assembly

• Approved to Reg 55
• D Value = 20.2Kn. S Value = 350kg
• Direct equivalent to MP082
• Suitable for towing trailers of up to 3.5T
• Easy to install, with pre-cast fixing holes

• 6m trailer cable fitted with a 7 pin plug
• Powerful magnets for quick and secure attachment
• 2 EU approved reflective triangles
• 2 EU approved combination lamps (stop/tail/indicator/numberplate)
• 1.8m cable between lamps