Workshop Tools

General Information

Thread Insert M8x1.25 - Pack 12. Thread Insert M8x1.25 - Pack 12

• Pack of 12
• For use with Laser thread insert kits
• Ideal for inserting into areas that will experience repeat thread wear

General Information

Air Bag Test Resistor Set. Air Bag Test Resistor Set

• Follow all health and safety guidance for air bags
• The tool is a 2.5 ohms resistor with two pin probes and when connected to the associated wiring effectively becomes a “dummy” airbag
• Connect in place of the air bag unit to allow the system to test for easy confirmation of component failure
• Assists in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners, etc.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Supplied in blister pack
• Valve allows trigger-adjustable airflow
• Ergonomically designed handle, for comfort in use

• Maximum Supply Pressure 10 bar / 140 psi
• Connection 1/4 Female
• Air Flow 270 l/min / 9.3 cfm
• Temperature Range 0 to 80 °C
• Grip Style Pistol
• Conical Nozzle Style
• Outlet pressure on blowguns should not exceed 2bar / 28lbf/in²
• It is therefore recommended that an in-line regulator is fitted to your air supply to ensure this.

• Locking
• Easy Release
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• 5in. Long

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Sizes: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm & 10 mm
• Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification
• Keys feature long hex arm for access in hard to reach areas

• Magnetic ball on long arm allows better angle of entry for hard to reach areas plus fastener control, set also features short hex arm for tight fit access & color coded hex key holder for convenient storage & identification

• Can be combined with replacement socket storage rails.
• Features a durable and light-weight design.
• Replacement rail socket clips.

• Socket Holder Rail Replacement Clip 1/2in.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

General Information

Flexi-Hose & Connector. Flexi-Hose & Connector

• For use where the standard fixed hose will not fit Grease jaws before use
• Nylon material
• Flexi Hose and Connector for use with grease guns 0241A and 0240B

• 1.6 mm thick blade resists bending reduces vibration and blate flattering at speed.
• Teeth are hardened and triple sharpened for a super sharp splinter free clean cut.
• 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts.

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• 1/2in.D
• Socket manufactured from Chrome Vanadium, bit from Silicon Steel
• Further socket sizes available in this range T7-T50
• Individually packaged Star Bits

General Information

File Set - Needle 10pc File Set - Needle 10pc.

• Suitable for home or hobbyist use
• Needle files ideal for precision work
• Professional quality tool

• NCCJ25F-RW - Rear Wheel Replacement
• NCCJ25F-RP - Rubber Pad Replacement
• NCCJ25F-P - Hydraulic Pump Replacement
• NCCJ25F-H - Handle Replacement
• NCCJ25F-FW - Front Wheel Replacement

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Essential workshop tool
• Air line Whip Hose
• Comes with Tailpiece & adaptor
• 0.6m (2') Long
• 1/4in. x 7mm ID Hose

• 4821A - Water Pump Pliers - 16in.
• 4820A - Water Pump Pliers - 10in.
• 4819 - Side Cutters - 6in.
• 4817 - Long Nose Pliers - 6in.
• A new range of chromed nickel steel pliers with serrated jaws - spring loaded and covered by TUV/GS certificates.

General Information

Deep Socket - Air Impact 1/2"D 24mm.;, Deep Socket - Air Impact 1/2"D 24mm;

• Manufactured from Chrome Vanadium
• 6pt (single Hex)
• Range: 10mm - 32mm
• Deep socket for use with air impact tools

• Lacquer Finish For Exceptional Rust Prevention
• Hardened Jaws & Cutting Edges For Strength & Durability
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Socket manufactured from Chrome Vanadium, bit from Silicon Steel
• 1/2in.D
• Further socket sizes available in this range T7-T50
• Individually packaged Star Bits

• Ceramic hybrid disc: grinds steel stainless steel.
• Made in Germany.
• Maximum productivity with CERA TURBO 50% faster material removal and 2x longer lifetime vs. bonded disc.
• Orders must be in multiples of 10 pcs.
• Highly flexible: perfectly adjusts to working piece.
• Best for ferrous metals stainless steel V2A (1.4301) / V4A (1.4401) and non-ferrous metals (aluminium titan etc.),
• Natural fibre backing pad.
• Low heat development: no metal discolouration especially on stainless steel.
• CERA TURBO XL with 10 mm protruding flaps for grinding down fillet welds.

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 21 mm