Workshop Tools

General Information

Cable End Shroud with Grip Collar - 15mm. Cable End Shroud with Grip Collar - 15mm

• 15mm diameter opening x 100mm length
• Also available: 25mm x 110mm length and 35mm x 130mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Glove Storage Bag. Glove Storage Bag

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

General Information

Fuel Filter Wrench 88mm x 15 Flats

• Pressed steel construction
• Equivalent to Honda OEM 070AA-RL00200
• 88mm (point to flat) x 15 flutes 3/8”D
• Applications include: Honda I-dtec diesel fuel filter
• Also suitable for oil filter removal where dimensions match (Hyundai/Kia 3.3 and 3.8 V6 petrol)

General Information

Engine Timing Tool Kit - for VAG 1.0, 1.2, 1.4L

General Information

EU Registered Design

General Information

Ribe Socket Set 1/2"D 3pc

• Sizes: 6S, 8S, 12S
• Manufactured from Chrome Vanadium with Phosphate finish
• For clutches, cylinder heads and balance shaft fixings etc
• Applications: Nissan, Renault
• 1/2in. Drive

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

General Information

Flexible Air Hose - Blue Flexible Air Hose - Blue.

• Silicone free and resistant to oil, UV, abrasion and weather
• Manufactured from matt finished, super flexible rubber/vinyl hybrid polymer material which lies flat when uncoiled
• 9.5mm x 15m
• Maximum working pressure 300PSI , minimum bursting pressure 900PSI and the hose can stand -40° to +60° C
• Fitted with 1/4in. BSPP fittings

General Information

Drip Tray. Drip Tray

• Also useful when transfering fluids to avoid workshop floor contamination
• Protect your drive and garage floors from oil drips
• Pouring spout in corner
• Manufactured from plastic
• Size: 24in. x 18in. x 3/4in. (609mm x 457mm x 19mm)

General Information

Spark Plug Socket 3/8"D 16mm

• Manufactured from Chrome Vanadium
• Suitable for use on BMW motorcycle spark plugs
• Thin wall (maximum diameter 20.8mm)
• Matt finish
• 6 point face drive (Single Hex)

General Information

Camshaft Locking Pins - for Ducati 3V

General Information

Engine Timing Tool Kit - VAG 1.2-1.4 TSI. Engine Timing Tool Kit - VAG 1.2-1.4 TSI

• Use with tensioner wrench Part No 6199
• Fitted to Audi A1, A3, Q3, Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta, Seat, Leon, Leon ST, and Skoda Octavia III, Fabia III from 2012 onwards
• Application for late 1.2/1.4TSI four cylinder, petrol engines (for three cylinder engines please use Laser 6230)
• Parts of this kit are design registered
• Made in Sheffield
• Unique camshaft locking tool design, equivalent to OEM T10494

General Information

Air Bag Test Resistor Set. Air Bag Test Resistor Set

• Follow all health and safety guidance for air bags
• The tool is a 2.5 ohms resistor with two pin probes and when connected to the associated wiring effectively becomes a “dummy” airbag
• Connect in place of the air bag unit to allow the system to test for easy confirmation of component failure
• Assists in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners, etc.

• Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
• Tyre depth measurement 0- 10mm
• Accuracy plus/minus 3%
• 0-130 psi (0-800kpa) - (1BAR=100kpa)
• Dual faced gauge 50mm diameter

General Information

Camshaft Setting Bar - for Ford 1.5 & 1.6 EcoBoost

• Made in Sheffield
• For use with Laser Part No. 5903
• Equivalent to OEM 303-1552 for locking the camshafts in position to allow the variable valve timing pulleys to be removed
• Applications: 1.6L EcoBoost Sigma petrol engine in B-Max, C-Max, Fiesta, Focus, Galaxy, Grand C-Max, Kuga, Mondeo, S-Max, Tourneo Connect and Transit Connect
• Used to lock the camshafts in their timed position when engine repair or rebuild requires the cam pulleys to be removed and timed

• OEM 303-1552

General Information

Brake Caliper Socket 3/8"D 8mm

• It is designed to shear/break-away when used, hence the desire for a socket which covers the same application
• This adaptor is fitted on all new Knorr-Bremse calipers as an OEM part of the caliper, and is also supplied as part of the OEM service kit, along with the dust cover which fits over the caliper adjuster
• Manufactured from Chrome Vanadium, Manganese Phosphate finish
• Brake Caliper Socket (replaces Brake Caliper Shear/Break-Away Adaptor on the original caliper)
• 11point x 3/8in.D x 26mm long
• Used on Knorr-Bremse Calipers – type SB, SK, SN – typically found on DAF / Foden / MAN / Mercedes / Scania / BOVA , plus BPW & SAF Trailers

General Information

Engine Timing Tool Kit - for VAG 3cyl 4v

• Made in Sheffield. Camshaft Locking Bar (C667) is EU Registered Design
• Camshaft belt tensioner wrench available - Part No. 6199 (OEM T10499)
• Also for Blue Motion and Ecomotive plus Green Tech engines
• Plus Seat Mii and Skoda Citigo
• Application: 3 cylinder VAG engine currently found in the Volkswagen UP! engine code CHYA,CHYB

General Information

Engine Timing Kit - for PSA, Vauxhall/Opel 1.0, 1.2

• Designed for the latest generation Citroen/Peugeot EBO and EB2 1.0L and 1.2L 3 cylinder engines
• Applications: Citroen C3111/DS3/DS3 Cabrio/C-Elysee and Peugeot 2008/208/308
• Designed to hold the camshafts and crankshaft in their timed position during belt replacement
• Made in Sheffield
• Packed in EVA foam in a metal box

General Information

Camshaft Drive Tensioner Wrench - for VAG

• Use on the latest range of 1.0L, 1.2L and 1.4L belt driven turbo charged engines
• Applications: Seat Mii/Leon, Skoda Octavia/Citigo, Volkswagen Up!/Golf V11, Audi A1/A3
• For adjusting the Camshaft drive belt tensioner as described by the manufacturer
• Use with Engine Timing Tool Kit - Part No 6230
• Measures 30mm (across the flats)

• Black finish
• Replaceable 1/2in.D (M) x 17mm Hex supplied (consumable) - Part No 2479
• Manufactured from Chrome Molybdenum
• Socket adaptor: 3/4in.D (F) > 1/2in.D (M)

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

• Fitted with a swivel connector and swivel head
• 0-60 psi/0-4 bar - Holds pressure until valve is released
• Liquid filled gauge - Diameter of gauge 2.5in.
• 550mm reach

General Information

Thread Insert M10x1.5 - Pack 12. Thread Insert M10x1.5 - Pack 12

• Ideal for inserting into areas that will experience repeat thread wear
• For use with Laser thread insert kits
• Pack of 12

General Information

Thread Insert M8x1.25 - Pack 12. Thread Insert M8x1.25 - Pack 12

• Pack of 12
• For use with Laser thread insert kits
• Ideal for inserting into areas that will experience repeat thread wear

General Information

Thread Repair Kit M10x1.5 Thread Repair Kit M10x1.5.

• Spare insert packs available
• For repairing and restoring damaged threads
• Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts

• M10 x 1.5

General Information

Thread Repair Kit M6x1.0 Thread Repair Kit M6x1.0.

• Spare insert packs available
• For repairing and restoring damaged threads
• Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts

• M6x1.0

General Information

Crankshaft Locking Kit - Ford 2.2. Crankshaft Locking Kit - Ford 2.2

• Applications: Econetic and HDT engines
• Used to lock and time the crankshaft and flywheel to allow the TDC sensor position to be set after removal when servicing the cam chain drive system
• Ford Transit 2.2 2006<
• TDCI crankshaft locking kit