Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 17 of 345
Results 81 - 85 of 1723
Part number: TPG1H07
Important compatibility info
| Title | Tyre Pressure Gauge Angled Head 6-50 psi & 0.5-3.4 bar (Blister Packed) |
Additional Information
The TPG1 is a Pocket Tyre Pressure Gauge with an angled head designed to fit onto the tyre valve at 90 degrees. PCL's TPG1 Pocket Tyre Pressure Gauge incorporates a self-adjusting friction device which enables the pressure to be read when the tyre pressure gauge is removed from the tyre valve, and a positive sealing washer to ensure reliability. Features integral pocket clip and removable protective cap.
- Complies with BS EN12645:2014
- Includes integral pocket clip and removable protective cap
- Accuracy: +/- 2 psi
- Calibration: 6-50 psi / 0.5-3.4 bar
- Reading Accuracy: 1 psi / 0.1 bar
ONLY
£12.57
£12.57
Part number: TDG16C01
Important compatibility info
| Title | Tyre Tread Depth Gauge (1-26mm with 1.6mm Mark) DVSA Approved |
Additional Information
PCL's in.Made in Sheffieldin. Tyre Tread Depth Gauge is manufactured to stringent quality standards and is DVSA (Previously VOSA) MOT centre approved. Easy to read this DVSA approved for MOT testing (previously VOSA) Tyre Tread Depth Gauge provides accurate measurement of tread 1-26mm and has a handy pocket clip.
- Handy pocket clip
- Department of Transport accepted for MOT testing
- 1.6mm illegal tyre tread depth mark
- Accurate measurement of tread 1-26 mm in 1 mm increments
- Approvals: Department of Transport accepted for MOT testing
- Accuracy: +/- 0.25 mm
- Calibration: 1-26 mm
ONLY
£6.83
£6.83
Part number: ACA2593S
Important compatibility info
| Title | Standard Male Adaptor -Thread R 1/4 |
Additional Information
- Case hardened for longer life
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Wide choice of thread and hose tail sizes
- Used in most workshop/garage environments
- Nominal Bore 4.8 mm
- Thread Type Male
- Thread Size R 1/4
ONLY
£4.75
£4.75
Part number: ACA2746S
Important compatibility info
| Title | Standard Adaptor Socket - Female Thread |
Additional Information
- Female Thread Rp 1/4
- Case hardened for longer life
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Wide choice of thread and hose tail sizes
- Used in most workshop/garage environments
ONLY
£4.75
£4.75
Part number: HA5212
Important compatibility info
| Title | Coiled Air Hose Assemblies - Polyurethane |
Additional Information
A range of hose sizes, working lengths and colour is available. PU Coiled Air Hose Assemblies overcome the limitations of nylon, such as kinking, abrasion and resistance to oils, and increases the effective working temperature range. The use of PU allows use in any direction with the elimination of hose kinks aiding air flow. It also provides ease of use when attached to tools, helps protect tool ends and leaves the work area clear of entanglements and trip hazards.
- Range of hose sizes, working lengths and a choice of colour
- Hose recoils to a fraction of it's working length
- 200 m straight ends with spring guard
- Nickel plated 360° swivel fittings
- Polyurethane (PU) material
- Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue
ONLY
£24.03
£24.03
Page 17 of 345
Workshop Tools
