Workshop Tools

• Resistances to most common chemicals found in auto shops
• Highly durable and impact resistant design to withstand drops up to 2 m
• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• Dual joints swivel 300° horizontally and 180° vertically to ensure full undercarriage illumination coverage
• Designed for the on-the-go needs of automotive maintenance and service trades
• Magnetic base for mounting applications & 30 cm magnetic storage tray to hold nuts & bolts
• Up to 15 hours of run time on M12™ 4.0 Ah battery pack
• TRUEVIEW™ high definition lighting with up to 1,200 Lumens
• Low battery indicator, light flashes when battery pack is low on charge

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Rivets in one stroke with a 20.32 mm stroke length
• On board fuel gauge and LED light for added user convenience and illumination in low lit working conditions
• Tool-free access to easily clean jaws. On-board nose piece storage and removal tool for user convenience
• Integrated belt hook and lanyard tie off point
• Ergonomic design with 273 mm H x 66.8 mm W x 165 mm in length without mandrel collector
• Retention nose pieces hold rivets in any orientation
• Up to 325 x 4.8 mm stainless steel rivets on a single charge with a 2.0 Ah battery pack
• Supplied with 4 x retaining tips
• Suitable for all aluminium steel stainless steel and copper rivets up to 4.8 mm

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Reversible belt hook
• Square friction ring
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening
• Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Incredibly compact design for this performance level, with only 124 mm overall length ideal for applications in tight spaces
• The most compact cordless impact wrench in its class, delivering the most access in tight spaces, with performance at 339 Nm of fastening torque

• Signal Locking will show the correct direction to a short to ground
• Signal distance bar indicates distance height from short to ground or open circuits
• LED light on receiver illuminates the work space area
• Longer 10-minute Auto shut off time

• Operating Voltage (Transmitter): 6V-48V DC
• Current Consumption (Transmitter): <200mA
• Operating Voltage (Receiver): 2 AAA batteries
• Signal Frequency: 4kHz polarized signal
• Circuit Testing Modes: Open circuit tracking
• short circuit tracking
• ground circuit tracking
• Operating Temperature: Up to 50°C
• Storage Temperature: Up to 70°C
• Maximum Humidity: 80% non-condensing
• Altitude Limit: <2000m
• Signal Detection: Indicates short and open circuits using visual and audio cues
• Sensitivity Adjustment: Adjustable for varying signal strengths
• Auto Shutoff: Receiver turns off after 10 minutes of inactivity
• Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
• Cable Length: 6m transmitter power cable for extended reach.

• Milwaukee Model No: M12FIR38LR-0
• Supplied with ¼″ adaptor
• Flexible battery system: works with all MILWAUKEE® M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS  electronic intelligence delivering  outstanding power, run time and durability
• The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Variable speed trigger provides ultimate control of the tool
• Extended reach ratchet adding additional 82 mm of length for access into tight spaces
• The industry leading FUEL technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
• With up to 75 Nm of max torque and 200 rpm's, this tool is the ideal fastening solution for automotive mechanics, maintenance and repair professionals

• No load speed (rpm): 0 - 200

• Flexible battery system: works with all MILWAUKEE® M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Compact and light weight allows users to complete applications in restricted areas
• LED light illuminates the cutline in low light conditions
• Patented FIXTEC clamp for fast and easy keyless blade change
• Sealed gearbox prevents water and debris entering the housing
• Counter balance mechanism lowers vibration to 6.5 m/s² allowing the operator to work safely for longer periods of time reducing fatigue

• 1 kit can cover various vehicles depending on make model & year of vehicle
• Product on Application
• TPMS valves used to replace damage valves

• 3/8in. T-handle Wrench (200 mm), 3/8in. Extension Bars (125 mm), 3/8in. Ratchet Wrench (200 mm)
• 3/8” Hex Sockets – 8, 10, 12, 13, 14, 17, 19 & 22 mm
• Combination Pliers (180 mm), Electricians Scissors (160 mm), Cable Knife - Changeable (48 x185 mm) & Spare Blade
• Set Content: Diagonal Cutter (160 mm), Snipe Nose Pliers (200 mm), Wire Stripper (160 mm),
• Packed in blow case and EVA foam
• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Also suitable for electricians and carpenters (1000V AC safe live working).
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

• Program / save profiles for unmatched control
• Configure to any application choosing optimum tool settings for repeatable precision
• Connect via Bluetooth® with the ONE-KEY™ app
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• ONE-KEY™ app also provides inventory function for total management of your complete tool / equipment fleet
• Save up to 4 custom settings to the tools memory for fast selection on the jobsite
• Complete tool customisation via ONE-KEY™ app to tune the tool to your needs
• Control speed, torque, start - end speeds and LED light
• M18 FIWF12 but with ONE-KEY™ technology
• Select from a range of application profiles or quickly create your own for perfect results on every trigger pull

• AC/DC versatility: Powered by MILWAUKEE® M12™ batteries, or mains plug supply
• Built in charger function for quick and convenient charging of any M12™ battery or electric devices via USB port
• Digital Bluetooth® receiver: Plays music up to 30 m away from your smartphone, computer or tablet
• IP54 in battery mode - making the radio dust and splashing water resistant
• DAB+ and AM/FM tuner with the digital processor delivers highest reception accuracy, signal clarity and additional information like: song, artist and accurate time
• Premium speaker and high frequency tweeter provides high sound quality

• Part of the PACKOUT™ modular storage system.
• Impact resistant polymer construction.
• Metal reinforced frame.
• Each shelf supports up to 22 kg of weight.
• Quick release design for easy mounting, height adjustment and removal of the shelves.
• E-Track mounting rails can be mounted on the wall in vehicles, shops or garages for ultimate versatility.

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Bright LED workspace illumination
• 1/2in. anvil with friction ring for quick and easy socket changes
• Only 71 mm head with anvil profile design allows for more access in tight spaces
• The long body profile allows for more access in hard to reach spaces
• 4-Mode DRIVE CONTROL includes Auto Shut-Off Mode and Bolt Removal Mode which prevents over-tightening and provides more control after bolt breakaway
• Delivers up to 270 Nm fastening torque and 300 Nm nut-busting torque

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Reversible belt hook
• 1/2 square friction ring
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening
• Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Extremely compact design - total length of just 124 mm for access into tight spaces
• Power efficiency under load - outstanding torque of 339 Nm

• Power Probe OBD II Breakout Testing Box
• Tests DLC (OBD port) for any abnormalities, such as shorting or reverse polarity at the pins before connecting other diagnostic equipment.
• quickly accss all 16 pins connections during repair and diagnosois of the vehicle

• Voltage Monitoring Range: 7.0V to 30.0V DC input
• Maximum Load: Up to 3.0A output
• Overload Protection: PTC self-healing fuse
• LED Displays: 3-digit resolution of 0.1V
• Banana Sockets: 16 outputs with 1.0mm diameter and LED indicators
• Protocols Detected: PWM (J1850)
• VPW (J1850)
• ISO 9141-2
• DIS/ISO 14230-4
• CAN bus (J-2284)
• Temperature Range: Suitable for automotive environments
• Humidity Tolerance: Less than 70%
• Cable Length: 30 inches (0.8 meters)
• Polarity Protection: Detects reverse polarity with red LED for pins 4 and 5
• Voltage Alerts: Slow beeps for low voltage (<11.8V for 12V systems)
• fast beeps for high voltage (>15.5V for 12V systems)
• Diagnostic Features: Monitors individual pins for voltage presence
• detects communication protocol signals
• DLC Connector Flashlight: Built-in light for easier connection
• Battery Type for Flashlight: CR1220 coin battery.

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Bright LED workspace illumination
• anvil with friction ring for quick and easy socket changes
• Only 71 mm head profile design allows for more access in tight spaces
• The long body profile allows for more access in hard to reach spaces
• 4-Mode DRIVE CONTROL includes Auto Shut-Off Mode and Bolt Removal Mode which prevents over-tightening and provides more control after bolt breakaway
• Delivers up to 270 Nm fastening torque and 300 Nm nut-busting torque

• Anti-roll, 3 sided collar on the handle.
• Wrench ready shank allows extra leverage to be applied.
• Hardened magnetic tips for maximum durability and fastener retention.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• T 10 / T 15 / T 20 / T 25 / T 30 / T 40
• PH 0 / PH 1 / PH 2 / PH 2 / PH 3, PZ 0 / PZ 1 / PZ 2 / PZ 2 / PZ 3
• SL 2.5 / SL 3 / SL 4 / SL 5.5 / SL 6 / SL 6.5 / SL 8

• Flexible battery system: works with all MILWAUKEE M12 batteries
• Supplied with 1/4in. adaptor
• The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Variable speed metal trigger provides ultimate control of the tool
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• The industry leading FUEL technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
• Low profile head design allows users better access in tight spaces
• With up to 75 Nm of max torque and 200 rpm's, this tool is the ideal fastening solution for automotive mechanics, maintenance and repair professionals

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Supplied with 6 and 8 mm collets
• To be used with discs up to 50 mm
• Features a 4-mode speed control and responsive variable speed trigger enabling outstanding control
• Compact size (only 119 mm long) to help fit in tight places, and offers great mobility and access
• The first cordless right angle die grinder that delivers more power vs. pneumatic models

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power run time and durability
• 1/4 Hex chuck for quick and easy bit change
• 4-Mode DRIVE CONTROL allows the user to shift to three different speed and torque settings as well as a self-tapping mode to maximise application versatility
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Fast driving speed with up to 3,600 rpm and 4,000 ipm
• Outstanding power to size ratio with 170 Nm of torque
• The compact design with a length of only 127 mm is ideal for working in confined spaces

• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• Sponge interface pad included optimises the tool for profiles and contours which increases the precision and removal of material
• Low vibration at only 4.3 m/s²
• Hook and loop pad allows the user to change quickly between different grit types
• Compact detail sander with a penta shaped pad allows uncompromised corner accessibility
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• LED lights up your work area for better visibility
• Four speed modes allows the correct speed to be set for different types of material

• Fastening and removing of 210 M8 bolts with one battery charge M12 B2 for all day work
• -
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability
• The industry leading FUEL™ technology combined with a reinforced mechanism for greater durability
• Variable speed metal trigger provides ultimate control of the tool
• Rubber overmold withstands most corrosive materials and provides increased comfort
• 19 mm low profile head design allows users better access in tight spaces
• With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user

• Spindle lock for easy accessory change
• Low weight only 0.36 kg
• LED light illuminates the work piece
• Soft grip and low vibration allows user to work comfortably and for longer periods
• 3.2 mm collet included, compatible with most common accessories
• Variable speed from 5000 rpm to 27,500 rpm with 12 speed settings allows the user to dial in the correct speed for each application
• Compact and balanced in all orientation design allow the user to hold the tool close to the work piece

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)

• Rounded I-Beam handle for comfortable handling grip.
• Chrome alloy steel, chrome plated.
• Ink-filled labels for clear visibility.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for long-lasting ratchet life.

• Trigger lock-off extends the life of the tool and battery
• Variable speed trigger provides outstanding control of the tool
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability
• ⁷⁄₁₆″ quick change chuck ensures fast and easy accessory changes
• Pneumatic performance with cordless convenience for better accessibility and manoeuvrability in tight spaces
• Sustained power without bogging down
• Optimal speed settings of 1200 RPM in first mode and 2500 RPM in second mode help to avoid burning the rubber and damaging the tyre
• The M12 FUEL™ low speed tyre buffer has a two-speed mode selector for reaming & buffing applications

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Supplied with 6 and 8 mm collets
• To be used with discs up to 50 mm
• Features a 3-mode speed control and responsive variable speed trigger enabling outstanding control
• Best-in-class size (262 mm long) to help reach in tight places, and offers great mobility and access
• The first cordless in-line die grinder that delivers more power vs. pneumatic models