Workshop Tools

• Includes 0.53m Hose SCO Connector
• Registered Design
• 3 second button hold for calibration toggle
• 4 units of calibration toggle as standard - psi, bar & kPa
• Replaceable 2 X AAA batteries power unit (supplied)
• Individually tested and certified against national approved gauges
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• Permanently backlit in use, auto off after 10 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Higher pressure range for multiple applications 4 – 250 psi range (including trucks) - Versatile and flexible saving time and money
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Small ‘stubby’ body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy

• Accuracy: ExceedsCompliant with BS EN12645:2014 Reading Accuracy: 0.1 psi / 0.01 bar / 1 kPa Max Inflation Pressure: 250 psi / 17.2 bar / 1723 kPa Max Inlet Pressure: 260 psi / 18.0 bar / 1795 kPa Inflation Flow (@ 190 psi / 13 bar): 500 l/min / 18 CFM Calibration: 4-250 psi / 0.3-17.2 bar / 30-1723 kPa Battery Type: 2 x AAA (supplied) Hose Length: 0.53 m / 21 in Tyre Valve Connection: Single clip-on Calibration: 4-250 psi / 0.3-17.2 bar / 30-1723 kPa

• Zero setting in any position
• x1 SR44 1.5 v battery supplied
• Large LCD display
• Metric, decimal inch and fraction inch (1/64 in) toggle
• Made from extra strong carbon fibre composite

• Accuracy: 0.2 mm
• Calibration: 0-25 mm / 0-1 in
• Reading Accuracy: 0.01 mm / 0.0005 in / 1/64 in

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Self calibrating
• Auto power off
• Measures tyre tread depth in mm / inch
• Measures pressure in psi / bar / kPa / kgf/cm²

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm

• Range of hose sizes, working lengths and a choice of colour
• Hose recoils to a fraction of it's working length
• 200 m straight ends with spring guard
• Nickel plated 360° swivel fittings
• Polyurethane (PU) material

• Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue

• Female Thread Rp 1/4
• Case hardened for longer life
• Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
• Wide choice of thread and hose tail sizes
• Used in most workshop/garage environments

• Case hardened for longer life
• Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
• Wide choice of thread and hose tail sizes
• Used in most workshop/garage environments

• Nominal Bore 4.8 mm
• Thread Type Male
• Thread Size R 1/4

• Complies with BS EN12645:2014
• Includes integral pocket clip and removable protective cap

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy: 1 psi / 0.1 bar

• 1.6 mm illegal tyre tread depth mark
• Accurate measurement of tread 1-26 mm
• DVSA approved for MOT testing
• Self-adjusting friction device
• A positive sealing washer ensures reliability

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy
• 1 psi / 0.1 bar

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Can also be used on cycles
• These caps are used to stop dirt entering the Schrader Valve on tyres

• Supplied in Black plastic

• Reduces the Power Probe tip battery voltage to 5V and limits the current output works with PP3EZREDAS
• Simple add-on accessory that works with all Power Probes with 4mm banana tip
• Safely simulate sensor reference voltages and outputs without damaging components

• Voltage Output: 5V regulated output
• Connector Type: Standard 4mm banana connector
• Compatibility: Works with Power Probe Circuit Testers (PPBasic, PP3 Series, PP4 Series, Pro Series)
• Adapter Requirement for Older Models: Requires banana jack conversion kit (#PNLS020A) for PP1 and PP2 models
• LED Indicator: Red LED illuminates to show active 5V output
• Ground Connection: Includes auxiliary ground lead clip for secure grounding
• Durability: Built with rugged materials for long-term use
• Use Case: Supplies a stable 5V to test circuits and components in vehicles
• Dimensions and Weight: Compact and lightweight for easy portability.

• Service Your Vehicles Safely: Electric and hybrid vehicles feature battery systems that need to be disconnected to prevent error or shock prior to service; Use the Power Probe VT750 LCD Car Voltage Meter Tester to ensure your battery voltage reads zero be
• Reliable Detection for Optimal Safety: Auto electric tester tool has a voltage rating from 12 to 750 volts and overvoltage protection up to 1000 volts AC/DC
• Compact Two-Prong Design: 9.4-inch (23.9cm) fixed probe housing and secondary electrical tester pole work together to prevent false readings and measure accurate, exact voltage (AC/DC) current
• Quality You Can Trust: Thick material ensures durability for the volt meter, while the retracting insulators help prevent any accidental shorts between the probes or surrounding objects
• Easy To Use: 10 minutes after disconnecting the 12-volt and high-volt batteries, complete a Live-Dead-Live test; Check 12v battery for a baseline, check high-volt battery for a dead or zero reading, then re-verify the electrical meter is still functioning

• Voltage Testing Range: 12V to 750V AC/DC
• Continuity Testing: Audible beep for continuity detection
• Display: LCD with clear digital readings
• Voltage Indication: Provides AC and DC voltage differentiation
• Polarity Detection: Identifies positive and negative poles
• Safety Compliance: CAT III 750V certification
• Response Time: Quick response for voltage and continuity checks
• Overvoltage Protection: Protects the device during high voltage surges
• Power Source: No batteries required, powered by the voltage under test
• Operating Environment: Designed for 0°C to 40°C, with 80% relative humidity tolerance
• Build Quality: Durable, ergonomic design with protective housing
• Probes: Integrated test probes with secure connectors.

• Pack of 5
• 280 micron mesh filters
• Designed for DeVilbiss, SATA and Iwata spray guns
• Gravity feed gun filter

• Insulation Test with PI/DAR/Timed
• mA-selectable mode
• Auto bi-direction continuity Test
• Visual/acoustic compare function
• Auto AC/DC Voltage Test with LPF
• 1500 records of Store/Recall

• Measures AC Voltage(ACV)
• DC Voltage(DCV)
• Frequency
• Earth-bond Resistance(Continuity)
• Capacitance
• Insulation Resistance
• Features Auto-sense mode for automatic detection of ACV or DCV
• Insulation test range: 50V to 1000V with maximum resistance range up to 200GΩ
• Earth-bond resistance measurement range: 0.01Ω to 40.00kΩ
• Capacitance measurement range: 0.1nF to 10.00uF
• Bluetooth Low Energy(BLE) V5.0 for wireless data transfer
• Compliance with IEC/EN 61010-1 and IEC/EN 61557 standards
• IP40 rated for dust resistance
• operates up to an altitude of 2000m
• True RMS measurements
• automatic discharge function
• CAT IV 600V rated
• supports up to 1500 stored readings
• Auto power-off for battery preservation
• Dimensions: 96mm x 207mm x 54mm
• weight: 630g
• powered by 4 AA batteries.

• Tests Bad Grounds and Short Circuits
• Supplies Power and Ground
• Digital Voltmeter with Min/Max Voltage Capturing
• Navigation Menu for EZ Learning

• Voltage Detection Range: Supports low and high AC voltage detection
• LED Indicators: Visual indication of circuit status and voltage presence
• Non-Contact Operation: Safely detects voltage without direct contact
• Frequency Compatibility: Operates effectively at standard electrical frequencies
• Durability: Designed for robust field use with protective casing
• Ease of Use: Features ergonomic design and intuitive operation
• Compliance: Adheres to international electrical safety standards
• Battery Operated: Uses standard alkaline batteries for portability.

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Power Probe OBD II Breakout Testing Box
• Tests DLC (OBD port) for any abnormalities, such as shorting or reverse polarity at the pins before connecting other diagnostic equipment.
• quickly accss all 16 pins connections during repair and diagnosois of the vehicle

• Voltage Monitoring Range: 7.0V to 30.0V DC input
• Maximum Load: Up to 3.0A output
• Overload Protection: PTC self-healing fuse
• LED Displays: 3-digit resolution of 0.1V
• Banana Sockets: 16 outputs with 1.0mm diameter and LED indicators
• Protocols Detected: PWM (J1850)
• VPW (J1850)
• ISO 9141-2
• DIS/ISO 14230-4
• CAN bus (J-2284)
• Temperature Range: Suitable for automotive environments
• Humidity Tolerance: Less than 70%
• Cable Length: 30 inches (0.8 meters)
• Polarity Protection: Detects reverse polarity with red LED for pins 4 and 5
• Voltage Alerts: Slow beeps for low voltage (<11.8V for 12V systems)
• fast beeps for high voltage (>15.5V for 12V systems)
• Diagnostic Features: Monitors individual pins for voltage presence
• detects communication protocol signals
• DLC Connector Flashlight: Built-in light for easier connection
• Battery Type for Flashlight: CR1220 coin battery.

• ADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons
• COMPATABLE WITH all Power Probe models with a 4mm banana jack in/out
• EASY INSTALL by removing power probe tip and inserting adapter into banana jack
• GREAT FOR diagnosing circuit fan issues

• Voltage Range: Operates between 9V and 24V DC
• Current Capacity: Maximum 40A output
• Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz
• Duty Cycle Range: Adjustable from 0% to 100%
• Input Protection: Overvoltage and reverse polarity protection
• Output Control: Variable output power via rotary dial
• Dimensions: Compact enclosure design for portability
• Connection Interface: Equipped with standard terminals for easy wiring
• Operating Temperature: -20°C to 60°C
• Housing: Durable and lightweight for automotive or workshop use
• Indicators: LED indicators for power status and output activity.

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Complete with 3 piece adaptor kit for bikes, air beds and other inflatables
• Large on/off button for easy use with dirty/greasy hands or in poor lighting conditions
• Flat design gives you maximum stability during use
• Valve cap storage compartment for safe keeping when inflating
• Fitted with 3m power cable and fused 12V DC power plug to help you reach around the vehicle
• Screw stem valve connector helps reach awkwardly placed tyre valves
• Flexible air hose with easy access storage compartment specifically designed to reduce kinks
• 40mm diameter analogue pressure gauge in PSI, BAR, kPA
• Inflates a tyre in 4.5 minutes

• Complete with 2 piece adaptor kit for bikes; air beds and other inflatables
• Easy to read digital display
• Compact for easy storage and transportation
• Built in white LED light
• Rechargeable with power bank function
• 4 programmable pressure settings with digital autostop for ease of use
• Inflates bicycle tyre in <2 minutes
• Versatile - Ideal for cars; motorbikes and bicycles

• EU Conforms: Electromagnetic Compatibility - Directive 2014/30/EU Restriction of Hazardous Substances (RoHS) - Directive 2015/863/EU Regulation (EC) No1907/2006 - REACH Machinery Directive 2006/42/EC UK Comforms: Electromagnetic Compatibility Regulations 2016 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008

• For use on tubeless tyres only
• A temporary repair designed to get you home, no need for any tools or wheel changes
• Larger tyres may require more than one aerosol
• Suitable for tyres up and including 16in.
• 1 aerosol for one tyre, single use product
• Supplied only as a merchandising unit
• Tyre sealant for emergency puncture repair

• Conforms with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012. References to the relevant UK Designated Standards used or references to other technical specifications in relation to which we declare: all requirements for product conformity including any testing and inspections are controlled by Ring Quality Assurance Department under the scope of our ISO 9001:2015 Quality Management System.

• 12v car cigarette lighter plug
• Built-in air pressure gauge and storage compartment
• High speed inflation of tyres and other inflatable objects
• Built in work light and flashing hazard light
• 260 PSI air compressor
• Oblong style 3 in 1 product

• CE, ROHS, REACH, GS TUV Compliant

• GS/TUV Approved
• Sizes 17mm & 19mm - 21mm & 23mm

• CE, ROHS, REACH, GS TUV Compliant

• ALL Streetwize air compressors include a special 3 piece adaptor kits for bicycle tyres, footballs, airbeds, inflatable toys and much more.
• With 250psi analogue pressure gauge
• Also suitable for balls, toys and many other inflatable objects
• For car, motorcycle, bicycle tyres

• CE, ROHS, REACH, GS TUV Compliant

• Built in storage space for hose, power lead & valve adaptors
• Cuts off when selected pressure level is reached
• Ideal for roadside emergencies
• Compact and lightweight, take it anywhere you go
• Comes with a digital display and a 2 piece adaptor kit
• Ideal for inflating tyres and other inflatable objects
• This simple to use air compressor automatically cuts off when the pre selected pressure level is reached

• CE, ROHS, REACH, GS TUV Compliant

• The outside diameter is 1.3cm
• The size of the tube inside is 1cm
• 16in. air pressure hose
• 2 x 51in. Hose
• For the use with motor vehicles/motor bikes/cycles and more
• Inflate balls, bicycles tyres, beach toys
• Transfer oil, petrol and other liquids

• CE, ROHS, REACH, GS TUV Compliant

• GS/TUV Approved
• Sizes 17mm & 19mm - 21mm & 23mm

• CE, ROHS, REACH, GS TUV Compliant

• Manual provided
• in.Weight: 8.4kg in.
• in.360 degree lifting saddle in.
• in.Fitted with swivel castor wheel for ease of positioning in.
• in.Includes extension handle in.
• Lifting range: 135mm to 330mm

• Manual provided
• in.Weight: 8.4kg in.
• in.360 degree lifting saddle in.
• in.Fitted with swivel castor wheel for ease of positioning in.
• in.Includes extension handle in.
• Lifting range: 135mm to 330mm

• Tough & shock proof metal body
• Spring pocket clip
• Capacity 10-50 psi
• Angled head fitting

• CE, ROHS, REACH, GS TUV Compliant

• Check your tyre tread depth on a regular basis
• Gives accurate readings
• Sturdy metal construction

• CE, ROHS, REACH, GS TUV Compliant

• Product Dimensions (L x W x H): 24 x 15 x 8.5cm
• Max Pressure (PSI): 100psi
• Features an analogue display pressure gauge that provides readings in both PSI and Bar
• Suitable for inflating tyres on cars, motorcycles & bicycles and it has a trigger lock valve adaptor. It also comes supplied with two nozzle adaptors for inflating footballs, cushions and other inflatables
• It also has a wide base that provides better stability when the foot pump is in use as well as a anti-slip tread plate. Plus, the pump has a retaining clip that runs the whole width of the foot pedal which makes it more secure when storing the foot pump
• Comes with a reinforced base at the bottom of both cylinders which enables the rods to smoothly glide into barrels. This helps to reduce strain on the cylinder end caps on both barrels
• This deluxe 100PSI double barrel foot pump is designed to provide you with a long lasting performance

• Conforms to EN16051:2012

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1975g

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• AWS A5.9
• Welding wire for welding

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• AWS A5.1 E6013
• Pack of 10 electrodes
• electrodes for MMA (stick) welding of mild steel

• Contact tips for welding with welding wire in torches

• Contact tips for welding with welding wire in torches

• Contact tips for welding with welding wire in torches