Workshop Tools

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

• Best fitting thanks to 6 gripping points.
• Thin wall construction provides access to tight spaces.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Laser etched size markings for easy identification and won't wear off.
• Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 15 CFM
• Air pressure: 3 BAR / 50PSI

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Shallow 27, 30 mm, Deep 33, 35 mm, Double Square 17 mm
• Black Phosphate
• Heat treated for longer life, & chamfered openings for faster socket fit over fastener
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Forged from high quality Chrome Molybdenum alloy steel

• Reduces the Power Probe tip battery voltage to 5V and limits the current output works with PP3EZREDAS
• Simple add-on accessory that works with all Power Probes with 4mm banana tip
• Safely simulate sensor reference voltages and outputs without damaging components

• Voltage Output: 5V regulated output
• Connector Type: Standard 4mm banana connector
• Compatibility: Works with Power Probe Circuit Testers (PPBasic, PP3 Series, PP4 Series, Pro Series)
• Adapter Requirement for Older Models: Requires banana jack conversion kit (#PNLS020A) for PP1 and PP2 models
• LED Indicator: Red LED illuminates to show active 5V output
• Ground Connection: Includes auxiliary ground lead clip for secure grounding
• Durability: Built with rugged materials for long-term use
• Use Case: Supplies a stable 5V to test circuits and components in vehicles
• Dimensions and Weight: Compact and lightweight for easy portability.

• 5in. Flat Nose Mini Pliers
• 5in. Diagonal Cut Mini Pliers
• 5in. Long Nose Mini Pliers
• 5in. End Cut Mini Pliers

• Spring-loaded handles for ease of use and less fatigue

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5 degree arc swing allowing access in tighter spaces.
• MAX BITE open-end grip reduces rounding and stripping.
• 180 degree pivoting head for greater access to tight spaces.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the Thunderweb core is thicker than that of
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.

• Longer shanks for improved visibility and extended reach.
• Durable case with robust zipper included to store tools.
• Chrome plated shanks increase tool life by reducing corrosion.
• 360° rotating back cap.
• All metal core for improved durability.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Ratcheting, self adjusting mini brake pipe cutter ideal for restricted access
• 4.75mm (3/16in.) with ratchet handle
• Automatic self adjusting for faster cutting
• Extra leverage due to handle length over standard cutter. To further increase leverage use the ¼” drive square in the end of the handle
• Fast and accurate operation, ideal for under vehicle use

General Information

Air Duster Blow Gun - HGV

• Designed for cleaning HGV cabs
• Maximum pressure 140psi
• Metal body
• T shaped connector with bronze ball shut off valve plus T shaped connector with plastic end 6mm dia
• 5m air coiled hose (6mm diameter) with swivel connector

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Features an ergonomic handle for added comfort
• Hinged joint allows wrench head access around obstructions
• Reaches hard-to-get-at nuts and bolts

• Ratchet Teardrop Flex Quick Release 1/2in. Carlyle Hand Tools

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

Technical Information

Timing Tool Set - Ford/Volvo. Timing Tool Set - Ford/Volvo

• Camshaft Locking Strap now includes OEM 303-376B
• Made in Sheffield
• Also used on Volvo models with 18/20 CHAIN engines
• Also included in the kit is 303-748 (21-259) for Focus C-Max 16, 14, 16 and Fiesta Fusion 124 & 14
• This new camshaft setting bar updates the existing 3096 and is suitable for all the applications including the latest HWDA, HWDB & HXDA engines

• Supplied on a magnetic rail.
• The lug nut sockets are thin-walled for easy access in tight wheel assemblies.
• Made from high quality alloy steel for strength and durability.
• Colour coded for easy identification.