Workshop Tools

General Information

Tap and Die Set - Metric 51pc Tap and Die Set - Metric 51pc.

• Manufactured from Alloy Steel and with split dies, this set is aimed at the professional user
• Sliding T-bar tap wrench

• Compatible with all PACKOUT™ products
• Charge 6 M18™ B5 batteries in 3 hours
• Charge personal electronic devices via 2.4A USB-A Port
• Compatible with all M18™ batteries
• Charges 2 batteries simultaneously at rapid charge rate
• Convenient carrying handle
• REDLINK™ Intelligence: Optimizes charge rates based on the battery type and temperature to minimize charge duration and maximize battery lifespan
• Fully compatible with the PACKOUT™ Modular Storage System
• 6 M18™ bays
• Store personal devices in storage caddies

• Rounded I-Beam handle for comfortable handling grip.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• MAX BITE open-end grip reduces rounding and stripping.
• 180Dg pivoting head for greater access to tight spaces.
• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm

• Added Convenience: The Power Probe DM500MAX Automotive Multimeter Voltage Tester has automatic back light that adjusts to changing light conditions; Drop resistant protective rubber holster
• Measuring Voltage: Accurately and automatically determine both AC and DC voltage from 0.01mV-1000V with 600V cat IV and 100V Cat III safety rating for testing vehicle batteries or home appliances
• Testing Current: Correctly calibrate amperage for both AC and DC currents with auto-range metering from 0.01mA-10.00A; Determine whether or not an outlet is active or if solar cells function properly
• For All Electrical Testing: Power Probe digital multimeters don’t just measure voltage and amperage but also resistance, frequency, continuity, capacitance, and even temperature
• Multimeter kit includes a DM500MAX multimeter, drop resistant rubber housing with kickstand, magnetic strap, 2 test leads (1 black, 1 red), 2 alligator clip lead attachments (1 black, 1 red), a USB plug, K-type thermocouple, and 4 AA batteries

• Measurement Capabilities: True RMS AC/DC voltage up to 1000V
• DC current up to 30A
• resistance up to 60MΩ
• Automotive Diagnostics: Cranking voltage tests
• alternator charging system tests for 12V/24V
• Fuse Current Testing: Measures current through fuses without removal (2A to 80A)
• Frequency and Duty Cycle: Measures PWM signals up to 40kHz
• duty cycle range: 1%-99%
• Thermal Imaging: Integrated infrared temperature measurement for advanced diagnostics
• Display: 3.5” high-resolution TFT color LCD with customizable interfaces
• Power Source: Rechargeable lithium-ion battery
• Durability: 4-foot drop protection
• IP54 dust and water resistance
• Safety Ratings: CAT IV 600V
• CAT III 1000V certified
• Data Storage: On-device memory for saving multiple test results.

• Insulation Test with PI/DAR/Timed
• mA-selectable mode
• Auto bi-direction continuity Test
• Visual/acoustic compare function
• Auto AC/DC Voltage Test with LPF
• 1500 records of Store/Recall

• Measures AC Voltage(ACV)
• DC Voltage(DCV)
• Frequency
• Earth-bond Resistance(Continuity)
• Capacitance
• Insulation Resistance
• Features Auto-sense mode for automatic detection of ACV or DCV
• Insulation test range: 50V to 1000V with maximum resistance range up to 200GΩ
• Earth-bond resistance measurement range: 0.01Ω to 40.00kΩ
• Capacitance measurement range: 0.1nF to 10.00uF
• Bluetooth Low Energy(BLE) V5.0 for wireless data transfer
• Compliance with IEC/EN 61010-1 and IEC/EN 61557 standards
• IP40 rated for dust resistance
• operates up to an altitude of 2000m
• True RMS measurements
• automatic discharge function
• CAT IV 600V rated
• supports up to 1500 stored readings
• Auto power-off for battery preservation
• Dimensions: 96mm x 207mm x 54mm
• weight: 630g
• powered by 4 AA batteries.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• -
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering  outstanding power run time and durability
• Fasten all blind rivets including aluminium steel stainless steel and copper from 4.8 mm 6.0 mm 6.4 mm and 7.0 mm to give you a bigger range of applications to be completed
• Tool-free access to easily clean jaws. On-board nose piece storage and wrench for user convenience
• The premium steel alloy 3-jaw design delivers more work between jaw changes
• ONE-KEY tool tracking & security offers a free of charge cloud-based tracking network and inventory management platform for your tools. ONE-KEY also features a remote locking functionality
• The transparent mandrel collector allows you to see when the mandrel collector is full avoiding any mandrel jammings and minimising down time to unblock jammings also avoiding costly repairs at the same time
• 20,000 N of pulling force with a stroke length of 30 mm gives you the power to complete the larger diameters effortlessly
• The M18 FUEL rivet tool with ONE-KEY is an optimised cordless solution that delivers fast easy riveting while maintaining performance durability and size
• Pulls up to 900 rivets with a rivet size of 4.8 mm in aluminium or 500 rivets with a size of 6.4 mm in aluminium on a fully charged M18 2.0 Ah battery pack

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.