Car Parts & Accessories by Laser
Categories
Important compatibility info
Title | Pick-Up Tool - Magnetic/Claw/Flexi - 2 Piece |
Type | Pick-up |
Function | Pick-up |
Total Length | 600 mm |
Magnet Head Diameter | 27 mm |
Additional Information
General Information
Magnetic & Flexible Claw Pick-up Tool - 2pc Magnetic & Flexible Claw Pick-up Tool - 2pc.
- 2 pieces
- 600mm long (Magnet 27 x 24 x 12mm)
- Two ideal ways for retrieving components in deep engine bays and confined spaces
- Magnetic and flexi claw
Important compatibility info
Title | Nut Rivet Set - 40 Piece |
Quantity | 40 |
Type | Blind Rivet Pliers |
Rivet Type | RivNuts |
Function | Blind Rivet Pliers |
Max. Rivet Nut Diameter | M6 |
Rivet Diameter, from | 3 mm |
Rivet Diameter, up to | 6 mm |
Additional Information
General Information
Nut Rivet Set - 40pc Nut Rivet Set - 40pc.
- Material: aluminium
- 40 Piece nut rivet set in four popular sizes
- Contents 10 x M3/M4/M5/M6 nut rivets
- Consumable
- For use with Nut Riveters: 0979/3597/3736/3713/2478 and others
Important compatibility info
Title | Ball Joint Separator - Fork Type - Small |
Type | Puller, ball joint |
Function | Puller, ball joint |
Tool handle type | Handle (cylindrical, short) |
Jaw Width | 14 mm |
Tool Handle Length | 200 mm |
Additional Information
General Information
Ball Joint Separator - Fork Type. Ball Joint Separator - Fork Type
- Secure jaws, short shaft
- Long version available
- Manufactured to Ansi/DIN standards
- Fork type ball joint separator
Important compatibility info
Title | Filter Wrench - Strap 1/2in. Drive |
Diameter To | 120 mm |
Drive | 1/2"D Inch |
Type | Socket Wrench Insert, oil drain plug |
Function | Socket Wrench Insert, oil drain plug |
Additional Information
- Extends up to 120mm
- Can also be used with 21mm spanner
- Strap filter wrench can be used in awkward areas with the help of any 1/2in. drive ratchet, power bar or extension bar
Important compatibility info
Title | Spline Socket Bit - M18 |
Material | Chrome-Molybdenum Steel |
Length 1 | 76 mm |
Bolt Head/Nut Design | Male Splined |
Type | Socket Wrench Insert, wheel nut/bolt |
Function | Socket Wrench Insert, wheel nut/bolt |
Additional Information
- Impact quality
- Correctly hardened
- Manufactured from Chrome Molybdenum
- This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models
Important compatibility info
Title | Star Bit - T55 - 1/2in. Drive T55 |
Length | 140 mm |
Spanner Size | T55 |
Colour | black/silver |
Drive | 1/2"D Inch |
Type | Screwdriver Bit |
Function | Screwdriver Bit |
Drive side (profile) | Torx |
Additional Information
- Designed for use on Ford and Vauxhall cylinder head bolts
- 1/2in.D
- Socket manufactured from Chrome Vanadium, Bit from Silicon Steel
- A tamperproof bit in a special 140mm length
Important compatibility info
Title | Telescopic Stainless Mirror - 6.3cm x 4.5cm |
Length 1 | 228 mm |
Length 2 | 717 mm |
Type | Worklight |
Function | Worklight |
Mirror Length | 63 mm |
Additional Information
General Information
Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.
- Angled for increased applications
- Soft Grip handle
- Extends from 228mm to 717mm
- Unbreakable mirror
- Measures 63mm x 45mm
Important compatibility info
Title | Oil Filter Wrench - Cup Type - 76mm/12 Flute |
Diameter 1 | 76 mm |
Colour | grey |
Number of sides | 12 |
Drive | 3/8" Inch |
Type | Socket Wrench Insert, oil drain plug |
Function | Socket Wrench Insert, oil drain plug |
Additional Information
- Essential for routine service on modern vehicles
- The paper filter can then be replaced successfully
- Plus Renault Megane, Laguna 15, 19, 22, 25 DCi engines and Mercedes-Benz
- For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models
- Removes the outer casing of eco-oil filters without damage
Important compatibility info
Title | Filter Wrench - Chain - <125mm |
Material | Aluminium |
Diameter To | 125 mm |
Type | Socket Wrench Insert, oil drain plug |
Function | Socket Wrench Insert, oil drain plug |
Additional Information
- Handles diameters up to 125mm
- Aluminium handle
- Filter wrench
Important compatibility info
Title | Plug Socket Thin Walled - 14mm - 3/8in. Drive |
Length | 65 mm |
Spanner Size | 14mm |
Type | Spark Plug Spanner |
Function | Spark Plug Spanner |
Wrench Profile | Double Hexagon |
Square Drive Tang Size | 10 (3/8") mm (inch) |
Additional Information
- It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
- Renault 1.2 16v
- Peugeot 207 and 307
- Mercedes-Benz M156 engine
- BMW Mini
- BMW E90335I N54 engine 2006
- This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles
Important compatibility info
Title | Feeler Gauge - AF/mm - 32 Blades & Brass |
Material | Steel |
Length 1 | 83 mm |
Type | Feeler Gauge |
Number of tools | 32 |
Function | Feeler Gauge |
Number of Parts | 1 -part |
Additional Information
General Information
Feeler Gauge Imperial/Metric - 32 Blades Feeler Gauge Imperial/Metric - 32 Blades.
- Imperial Sizes: 0015/002/0025/003/004/005/006/007/008/009/010/011/012/015/016/017/018/ 019/020/021/022/023/024/025/026/028/030/032/035in.
- Brass: 0010in./254mm
- Metric sizes: 038/051/063/076/102/127/152/178/203/229/254/279/305/381/406/432/457/ 483/508/533/559/584/610/635/660/711/762/813/889mm
- 32 blade 0038-0889 Metric and 00015 - 0035 Imperial Plus Brass 0010-0254 for use on the reluctor air gap on electronic ignition systems where non-metallic blades are required
Important compatibility info
Material | Butyl Rubber |
Colour | black |
Type | Dent Tool |
Function | Dent Tool |
Max. Loading | 10 kg |
Additional Information
General Information
Dent Puller/Suction Cup Dent Puller/Suction Cup.
- Small rubber suction
- Easy handle knob
- Rubber Suction Cup (75mm) for small dent removal Can also be used for carrying and positioning tiles, marble and glass Holds up to 10kg horizontally
Important compatibility info
Clamp | For Brake Hoses, For Vacuum Hoses, For Heater Hoses, For Flexi-Hoses |
Type | Pliers, hose clamp |
Function | Pliers, hose clamp |
Additional Information
- High-visibility colour for easy location
- Special jaws will not damage internal hose lining
- Lightweight, non-conductive
- Can be used on brake, vacuum, heater and all other flexi hoses
Important compatibility info
Title | Measuring Jug - Clear White - 2 Litre |
Material | Nylon |
Colour | white-transparent |
Capacity | 2 l |
Type | Universal Container |
Function | Universal Container |
Additional Information
General Information
Measuring Jug - 2 Litre. Measuring Jug - 2 Litre
- Translucent container for easy visibility
- Includes cap for jug to stop contamination
- Flexi spout with cap
- Complete with flexi-spout
- Suitable for all types of fluids including petrol and diesel, with cap and see through body for visual measurement
Important compatibility info
Title | Funnel With Flexi Spout - Red - 100mm |
Material | PE (Polyethylene) |
Diameter 1 | 100 mm |
Colour | red (2x) |
Length 1 | 435 mm |
Type | Funnel |
Function | Funnel |
Additional Information
- Conforms to PAHS & Reach directive
- Made from PP material
- Non spill rim
- Complete with lid and cap which prevents contamination and provides safer handling of liquids and chemicals
- Flexi pipe funnel with Lid
Important compatibility info
Title | Air Bag Test Resistor Set |
Function | Electrical Tool Set |
Airbag | for driver airbag |
Type | Electrical Tool Set |
Additional Information
General Information
Air Bag Test Resistor Set. Air Bag Test Resistor Set
- Follow all health and safety guidance for air bags
- The tool is a 2.5 ohms resistor with two pin probes and when connected to the associated wiring effectively becomes a “dummy” airbag
- Connect in place of the air bag unit to allow the system to test for easy confirmation of component failure
- Assists in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners, etc.
Important compatibility info
Title | Circuit Tester - Brass 6V - 24V |
Material | Brass |
Type | Diagnosis Unit, short circuit cause |
Function | Diagnosis Unit, short circuit cause |
DC voltage to | 24 V |
Additional Information
- 6, 12, 24volt
- Spare bulbs Part No 2954 (2)
- CE certificated For automotive use only
- For use on 6V/12V/24V vehicles
- Brass finished circuit tester
Important compatibility info
Title | Oil Filter Wrench - Cup Type - 76mm/14 Flute |
Material | Steel |
Diameter 1 | 74 mm |
Colour | black |
Number of sides | 14 |
Type | Socket Wrench Insert, oil drain plug |
Function | Socket Wrench Insert, oil drain plug |
Additional Information
General Information
Oil Filter Wrench 3/8"D - 76mm x 14 Flutes
- Also fits Mazda 2.3 engines and Range Rover Evoque 2.0 petrol
- 3/8in. drive
- Suitable for eco filters on Audi, BMW, Mercedes-Benz, Porsche and Volkswagen
Important compatibility info
Square Drive Tang Size | 10 (3/8") mm (inch) |
Length 1 | 65 mm |
Type | Socket Wrench Insert, brake caliper |
Length 2 | 92 mm |
Title | Brake Hex Key Set - 7mm - 2 Piece |
Number of Parts | 2 -part |
Material | Chrome Vanadium Steel |
Width 1 | 7 mm |
Function | Socket Wrench Insert, brake caliper |
Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
Hex Bit Set 7mm - 2pc. Hex Bit Set 7mm - 2pc
- 65mm and 92mm long
- Applications for: BMW3/5 with E36 chassis| Ford Mondeo, Fiesta, Alfa Romeo, Vauxhall, Volkswagen, SAAB, Chrysler, BMW Mini etc
- Essential brake service tool
- Two lengths of 7mm Hex Key in 3/8in. drive format for use on brake calipers on BMW 3 Series with E36 chassis
Important compatibility info
Title | Oil Filter Wrench - Cup Type - 88mm/16 Flute |
Material | Steel, Cork |
Diameter 1 | 86 mm |
Number of sides | 16 |
Type | Socket Wrench Insert, oil drain plug |
Function | Socket Wrench Insert, oil drain plug |
Additional Information
General Information
Oil Filter Wrench 3/8"D - 88mm x 16 Flutes
- 3/8in. drive
- For Eco filters on Volvo S40 & S80 and BMW N40, N42, N45, N46, N52
- This Oil Filter Wrench is suitable on eco filters on Volvo S40 and S80
- 88mm with 16 flutes
Important compatibility info
Title | Wire Brush - Flat Type With Quick Chuck End - 75mm |
Material | Steel |
Diameter 1 | 75 mm |
Surface | Brass-plated |
Type | Brush Disc, drill |
Function | Brush Disc, drill |
Bristle Material | Steel |
Brush Head Shape | Flat |
Additional Information
General Information
Flat Brush with Quick Chuck End - 75mm Flat Brush with Quick Chuck End - 75mm.
- Always wear eye protection
- Brass plated
- Steel wire
- For use with Laser's quick change facility for speedy switch from drill to driver
Important compatibility info
Additional Information
- Black
- Design helps protect fingers
- Rubber
- Flexible for a smooth contoured finish
- Grips most sheets of wet and dry sanding material
Important compatibility info
Title | Washer Jet Tool - Single |
Material | Steel |
Colour | silver |
Type | Adjustment Tool, window wash water jet |
Function | Adjustment Tool, window wash water jet |
Additional Information
General Information
Washer Jet Tool (CD) Washer Jet Tool (CD).
- Other end gives a firmer tool for redirecting onto the windscreen
- One screw end reveals fine pin point for cleaning out
- Knurled body gives added grip, complete with a pocket clip
- Suitable for cleaning out blocked washer jets and redirecting
- Double ended washer jet tool
Important compatibility info
Title | Thread Insert - M8 x 1.25 - Pack Of 12 |
Material | Steel |
for article number | For Laser 6009 |
Type | Thread Tap Set |
Function | Thread Tap Set |
Number of Parts | 12 -part |
For Thread Size | M8x1,25 |
Additional Information
General Information
Thread Insert M8x1.25 - Pack 12. Thread Insert M8x1.25 - Pack 12
- Pack of 12
- For use with Laser thread insert kits
- Ideal for inserting into areas that will experience repeat thread wear
Important compatibility info
Title | Tyre Pressure Gauge - Analogue |
Additional Information
- For cars and light commercials
- Pocket clip
- Angled head for access
- Metal body
- 0-50PSI/kpa
- Correct tyre inflation gives more mpg and better braking, also prolongs tyre life
Important compatibility info
Title | Mixture Strength Tester |
Additional Information
- AdBlue is a registered trademark of the Verband der Automobilindustrie e.V. (VDA)
- Always wash device internals with distilled water after use
- Easy to use and read
- Accurate result regardless of sample temperature
- Gives a clear pass/fail result
- Applications: all vehicles fitted with diesel engines using a Urea solution at 32.5% as a diesel exhaust fluid (AdBlue)
Important compatibility info
Function | Socket Wrench Insert, oil drain plug |
Diameter To | 120 mm |
Title | Filter Wrench - Chain 1/2in. Drive |
Type | Socket Wrench Insert, oil drain plug |
Drive | 1/2"D Inch |
Additional Information
- Turned by a 1/2in. drive ratchet or 21mm spanner
- The chain is simply locked around the filter
- A robust chain wrench designed to remove all oil filters up to 120mm in diameter
Important compatibility info
Title | Funnel With Flexi Spout - Black - 100mm |
Material | PP (Polypropylene) |
Diameter 1 | 100 mm |
Colour | black |
Length 1 | 350 mm |
Type | Funnel |
Function | Funnel |
Additional Information
- Conforms to PAHS & Reach directive
- Made from PP material
- Non spill rim
- Complete with lid and cap which prevents contamination and provides safer handling of liquids and chemicals
- Flexi pipe funnel with Lid
Important compatibility info
Title | Mounted Stone Brush Set - 5 Piece |
Type | Grinding Stone |
Function | Grinding Stone |
Number of Parts | 5 -part |
Shaft Material | Steel |
Additional Information
General Information
Mounted Stone Set 5pc Mounted Stone Set 5pc.
- For use with an electric drill/cordless drill
- Varied heads for even the most intricate jobs
- Precision tool
- 5 abrasive heads for precision finishing
Important compatibility info
Title | Flexi-Hose & Connector |
for article number | For Laser0240 & 0241 |
Type | Hose, grease gun |
Function | Hose, grease gun |
Additional Information
General Information
Flexi-Hose & Connector. Flexi-Hose & Connector
- For use where the standard fixed hose will not fit Grease jaws before use
- Nylon material
- Flexi Hose and Connector for use with grease guns 0241A and 0240B






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023