Car Parts & Accessories by Laser

General Information

Oil Filter Wrench 3/8"D - 88mm x 16 Flutes

• 3/8in. drive
• For Eco filters on Volvo S40 & S80 and BMW N40, N42, N45, N46, N52
• This Oil Filter Wrench is suitable on eco filters on Volvo S40 and S80
• 88mm with 16 flutes

General Information

Hex Bit Set 7mm - 2pc. Hex Bit Set 7mm - 2pc

• 65mm and 92mm long
• Applications for: BMW3/5 with E36 chassis| Ford Mondeo, Fiesta, Alfa Romeo, Vauxhall, Volkswagen, SAAB, Chrysler, BMW Mini etc
• Essential brake service tool
• Two lengths of 7mm Hex Key in 3/8in. drive format for use on brake calipers on BMW 3 Series with E36 chassis

General Information

Oil Filter Wrench 3/8"D - 76mm x 14 Flutes

• Also fits Mazda 2.3 engines and Range Rover Evoque 2.0 petrol
• 3/8in. drive
• Suitable for eco filters on Audi, BMW, Mercedes-Benz, Porsche and Volkswagen

• 6, 12, 24volt
• Spare bulbs Part No 2954 (2)
• CE certificated For automotive use only
• For use on 6V/12V/24V vehicles
• Brass finished circuit tester

General Information

Dent Puller/Suction Cup Dent Puller/Suction Cup.

• Small rubber suction
• Easy handle knob
• Rubber Suction Cup (75mm) for small dent removal Can also be used for carrying and positioning tiles, marble and glass Holds up to 10kg horizontally

• High-visibility colour for easy location
• Special jaws will not damage internal hose lining
• Lightweight, non-conductive
• Can be used on brake, vacuum, heater and all other flexi hoses

General Information

Measuring Jug - 2 Litre. Measuring Jug - 2 Litre

• Translucent container for easy visibility
• Includes cap for jug to stop contamination
• Flexi spout with cap
• Complete with flexi-spout
• Suitable for all types of fluids including petrol and diesel, with cap and see through body for visual measurement

• Conforms to PAHS & Reach directive
• Made from PP material
• Non spill rim
• Complete with lid and cap which prevents contamination and provides safer handling of liquids and chemicals
• Flexi pipe funnel with Lid

General Information

Air Bag Test Resistor Set. Air Bag Test Resistor Set

• Follow all health and safety guidance for air bags
• The tool is a 2.5 ohms resistor with two pin probes and when connected to the associated wiring effectively becomes a “dummy” airbag
• Connect in place of the air bag unit to allow the system to test for easy confirmation of component failure
• Assists in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners, etc.

General Information

Feeler Gauge Imperial/Metric - 32 Blades Feeler Gauge Imperial/Metric - 32 Blades.

• Imperial Sizes: 0015/002/0025/003/004/005/006/007/008/009/010/011/012/015/016/017/018/ 019/020/021/022/023/024/025/026/028/030/032/035in.
• Brass: 0010in./254mm
• Metric sizes: 038/051/063/076/102/127/152/178/203/229/254/279/305/381/406/432/457/ 483/508/533/559/584/610/635/660/711/762/813/889mm
• 32 blade 0038-0889 Metric and 00015 - 0035 Imperial Plus Brass 0010-0254 for use on the reluctor air gap on electronic ignition systems where non-metallic blades are required

• It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
• Renault 1.2 16v
• Peugeot 207 and 307
• Mercedes-Benz M156 engine
• BMW Mini
• BMW E90335I N54 engine 2006
• This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles

• Handles diameters up to 125mm
• Aluminium handle
• Filter wrench

• Essential for routine service on modern vehicles
• The paper filter can then be replaced successfully
• Plus Renault Megane, Laguna 15, 19, 22, 25 DCi engines and Mercedes-Benz
• For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models
• Removes the outer casing of eco-oil filters without damage

General Information

Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.

• Angled for increased applications
• Soft Grip handle
• Extends from 228mm to 717mm
• Unbreakable mirror

• Measures 63mm x 45mm

• Designed for use on Ford and Vauxhall cylinder head bolts
• 1/2in.D
• Socket manufactured from Chrome Vanadium, Bit from Silicon Steel
• A tamperproof bit in a special 140mm length

• Impact quality
• Correctly hardened
• Manufactured from Chrome Molybdenum
• This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models

• Extends up to 120mm
• Can also be used with 21mm spanner
• Strap filter wrench can be used in awkward areas with the help of any 1/2in. drive ratchet, power bar or extension bar

General Information

Ball Joint Separator - Fork Type. Ball Joint Separator - Fork Type

• Secure jaws, short shaft
• Long version available
• Manufactured to Ansi/DIN standards
• Fork type ball joint separator

General Information

Nut Rivet Set - 40pc Nut Rivet Set - 40pc.

• Material: aluminium
• 40 Piece nut rivet set in four popular sizes
• Contents 10 x M3/M4/M5/M6 nut rivets
• Consumable
• For use with Nut Riveters: 0979/3597/3736/3713/2478 and others

General Information

Magnetic & Flexible Claw Pick-up Tool - 2pc Magnetic & Flexible Claw Pick-up Tool - 2pc.

• 2 pieces
• 600mm long (Magnet 27 x 24 x 12mm)
• Two ideal ways for retrieving components in deep engine bays and confined spaces
• Magnetic and flexi claw

• Resistant to oil and fuel
• Features tapered spout and venting ribs and filter
• Manufactured from high density polyethylene
• 255 x 165mm opening designed to take up-ended oil containers

General Information

Thread Insert M10x1.5 - Pack 12. Thread Insert M10x1.5 - Pack 12

• Ideal for inserting into areas that will experience repeat thread wear
• For use with Laser thread insert kits
• Pack of 12

General Information

Abrasive Wheel with Quick Chuck - 75mm Abrasive Wheel with Quick Chuck - 75mm.

• Maximum 4500 rpm
• Allows speedy switch from drill to driver
• For use with Laser's quick change facility for speedy switch from drill to driver

• Manufactured from Chrome Molybdenum
• For use with air impact tools
• Robust quality
• Impact adaptor
• 1/inch D<3/4inch D
• Manufactured from Chrome Molybdenum
• Robust quality adaptors and reduces

• Lever release
• Brass
• NPT hose
• Single head clip-on type for 1/4in.

• Sizes required
• For checking wear on brake linings
• Colour coded
• Plastic construction
• Sizes: Green 8/10/12mm (SAE 0.3150-0.4720), Yellow 4/5/6mm (SAE 0.1575- 0.2382), Red 2/3mm (SAE 0-0787-0.1181)

• 65-105mm diameter
• Suitable for old style oil filters
• Turn knob adjustment
• Suitable for old style oil filter wrenches
• This metal band wrench will remove any cylindrical object up to a diameter of 120mm

• Rubber connector
• Metal to HT lead connector
• Flash indicator
• In line spark plug tester

General Information

Grip Wrench - Long nose;, Grip Wrench - Long nose.;

• For use in automotive precision work
• Spring loaded locking
• A long nosed grip wrench in black anodised finish

General Information

Safety Locking Wire 0.8mm x 30m. Safety Locking Wire 0.8mm x 30m

• Safety wiring also serves as a visual indicator that the fasteners have been properly tightened
• Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces
• Ideal for motor racing applications
• Supplied on a plastic dispenser
• Length 30m
• Stainless steel locking wire 0.8mm