Important compatibility info
Spanner Size | 22 |
Weight | 0.077 kg |
Cable Length | 260 mm |
Number of circuits | 3 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.61 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Function | Radiator Hose |
Type | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Placement on Vehicle | Upper |
Inner diameter | 7 mm |
Weight | 0.56 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of circuits | 5 |
Function | Cable Repair Set, door |
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with holder, with gaskets/seals |
Extra Description | febi Plus |
Material | FVMQ [fluorosilicone rubber), Plastic |
Function | Valve, crankcase ventilation |
Additional Information 2 | with filter |
Type | Valve, crankcase ventilation |
Weight | 0.23 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint, shift rod |
Type | Joint, shift rod |
Weight | 0.6 kg |
Length | 142 mm |
External Thread Size | M12 x 1,75, M10 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 367 mm |
Outer diameter | 127 mm |
Weight | 1.8 kg |
Number of Coils | 5.8 |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.816 kg |
External Thread Size | M16 x 1,5, M24 x 1,5 |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 259 mm |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 96 mm |
Outer diameter | 61 mm |
Inner diameter | 25 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Weight | 1.610 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Width of castor bearing surface | 20 mm |
Outer diameter | 58 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 37 mm |
Colour | Silver |
Bolt Hole Circle Diameter | 275 mm |
Number of Holes | 8 |
Function | Cover, wheels |
Weight | 1.7 kg |
Outer diameter | 364 mm |
Fits rim size | 17.5 Inch |
Type | Cover, wheels |
Inner diameter | 191 mm |
Material | Sheet Steel |
Surface | Painted |
Shape/Form | Open form |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.50 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 27073 |
Material | Sheet Steel |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Manual |
Extra Description | febi Plus |
Function | Window Regulator |
Type | Window Regulator |
Paired article numbers | 174876 |
Weight | 0.790 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.197 kg |
Pressure | 6.5 bar |
Type | Oil Pressure Valve |
Function | Oil Pressure Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Paired article numbers | 180262 |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Weight | 1.1 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Placement on Vehicle | Wheel Side |
Length | 171 mm |
Outer diameter | 83 mm |
External Teeth, Wheel Side | 24 |
Seal Diameter | 76 mm |
Internal Teeth, wheel side | 22 |
Weight | 2.390 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.50 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27074 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner Pulley, timing belt |
Width of castor bearing surface | 26 mm |
Track rollers material | Plastic |
Type | Tensioner Pulley, timing belt |
Weight | 0.282 kg |
Outer diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 48364 |
Function | Frame, exterior door handle |
Placement on Vehicle | Left Rear |
Extra Description | febi Plus |
Weight | 0.589 kg |
Type | Frame, exterior door handle |
Length | 203 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.4 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 340 mm |
Min. Length | 235 mm |
Pipe Diameter | 50 mm. 39 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M12 x 1,75 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023