Important compatibility info
Placement on Vehicle | frontal sided |
Width | 6.2 mm |
Material | FPM (fluoride rubber) |
Outer diameter | 50 mm |
Inner diameter | 38 mm |
Rotation Direction | Clockwise rotation |
Function | Shaft Seal, crankshaft |
Weight | 0.013 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.006 kg |
Height | 7 mm |
Outer diameter | 37 mm |
Inner diameter | 28 mm |
Type | Shaft Seal, automatic transmission |
Function | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 52 mm |
Function | Bellow Kit, steering |
Material | Thermoplast |
Additional Information 2 | with clamps |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 200 mm |
Weight | 0.072 kg |
Inner diameter 1 | 13 mm |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (103035)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
Important compatibility info
Weight | 0.047 kg |
Type | Coolant Flange |
Function | Coolant Flange |
for OE number | 1J0 121 087 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.225 kg |
Length | 335 mm |
Height | 56 mm |
Width | 101 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Replaces | 31174 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Additional Information 2 | with mounting sleeve |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 38 mm |
Outer diameter | 36 mm |
Inner diameter | 11 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.115 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Metal |
Inner diameter | 18 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Placement on Vehicle | Front Axle |
Thickness | 49 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bushing, leaf spring hanger |
Function | Bushing, leaf spring hanger |
Weight | 0.167 kg |
Inner diameter | 30 mm |
Thickness | 22 mm |
Outer diameter | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.14 kg |
Placement on Vehicle | Upper |
Material | Rubber, Rubber with fabric lining |
Outer diameter | 42 mm. 48 mm |
Inner diameter | 33 mm. 39 mm |
Colour | Black |
Cooling Hose | from coolant regulator housing to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.042 kg |
Function | Seal Cap, camshaft |
Extra Description | febi Plus |
Type | Seal Cap, camshaft |
Outer diameter 1 | 42.5 mm |
Outer diameter 2 | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Cap, camshaft (23204)
- 1x Febi Seal Cap, camshaft (23205)
Important compatibility info
Inner diameter | 111 mm |
Function | Seal Ring, wheel hub |
Outer diameter | 121 mm |
Thickness | 5 mm |
Material | FPM (fluoride rubber) |
Weight | 0.015 kg |
Type | Seal Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Weight | 0.140 kg |
Length | 70 mm |
Height | 120 mm |
Width | 70 mm |
Outer diameter | 71 mm |
Inner diameter | 20 mm |
Filter type | Filter Insert |
Seal Diameter | 27.5 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 37 mm |
Outer diameter | 27.5 mm |
Material | Steel |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Quality/ Grade | 10.9 |
Bolt Head/Nut Design | Male Hex |
Thread Length | 34 mm |
Spanner Size | 19 |
Length | 62 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Weight | 0.092 kg |
External Thread Size | M14 x 1,5 |
Rims | for light alloy rims, for steel rims |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.344 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 105 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with nut, with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (18266)
- 1x Febi Screw (36664)
- 1x Febi Nut, stabiliser bar (30155)
Important compatibility info
Weight | 0.182 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 50 mm |
Thickness | 45 mm |
Inner diameter | 20 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Length | 180 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.127 kg |
Height | 144 mm |
Outer diameter | 85 mm |
Inner diameter | 14 mm |
Function | Fuel filter |
Filter type | Filter Insert |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Type | Oil Filter |
Weight | 0.322 kg |
Internal Thread Size | 1" - 12 UNF |
Filter type | Spin-on Filter |
Outer diameter | 76 mm |
Height | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Weight | 0.044 kg |
Number of Connectors / Ports | 1 |
Spanner Size | 24 |
Type | Oil Pressure Switch |
Shifting Points | 0.4 bar |
Function | Oil Pressure Switch |
Colour Coding | Black |
External Thread Size | G 1/8" |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023