Hose & Pipe

Title Junior Clips M/S 11-13mm - Pack of 50

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
  • 7mm A/F screw fastening
  • Used in applications such as securing fuel lines and heater hoses
  • Ideal for small bore hoses with relatively low pressures, where little clamping force is required
  • Mini clips, also known as nut & bolt clips
Jubilee NB1113 Junior Clips M/S 11-13mm Pack Of 50
ONLY
£24.85
Quantity:
Title Junior Clips M/S 12-14mm - Pack of 50

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
  • 7mm A/F screw fastening
  • Used in applications such as securing fuel lines and heater hoses
  • Ideal for small bore hoses with relatively low pressures, where little clamping force is required
  • Mini clips, also known as nut & bolt clips
Jubilee NB1214 Junior Clips M/S 12-14mm Pack Of 50
ONLY
£24.85
Quantity:
Inner diameter 1 14.5 mm
Colour Black
Material Plastic
Inner diameter 2 14.5 mm
Type Hose, crankcase ventilation
Hose Length 330 mm
Function Hose, crankcase ventilation
Gates EMH714 Crank Case Breather Pipe Hose
ONLY
£24.83
Quantity:
Part number: 102606
Weight 0.060 kg
Function Hose, air supply
Extra Description febi Plus
Additional Information 2 with quick couplers
Type Hose, air supply
Inner diameter 18 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 102606 Hose, air supply
ONLY
£24.82
Quantity:
Material Rubber
Length 452 mm
Weight 0.145 kg
Type Hydraulic Hose, steering
Function Hydraulic Hose, steering

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 186142 Power Steering Pipe Hose
ONLY
£24.81
Quantity:
Title Pipe Connector - T Piece Push-Fit - 12mm - Pack Of 10

Additional Information

  • Qty: 10
  • Natural
  • Metric Sizes
  • Plastic
  • Equal Tee
  • 12.0mm ID x L69 x H36
Connect 32884 Plastic Pipe Joiner Tpiece 12mm 10pk
ONLY
£24.72
Quantity:
No image found
ONLY
£24.66
Quantity:
No image found
ONLY
£24.59
Quantity:
Hose Length 330 mm
Inner diameter 2 18.5 mm
Placement on Vehicle from cylinder head cover to oil separator
Material Plastic
Colour Black
Function Hose, crankcase ventilation
Type Hose, crankcase ventilation
Inner diameter 1 18.5 mm
Gates EMH636 Crank Case Breather Pipe Hose
ONLY
£24.59
Quantity:
Function Hose, crankcase ventilation
Hose Length 280 mm
Type Hose, crankcase ventilation
Colour Black
Inner diameter 2 16 mm
Material Plastic
Inner diameter 1 16 mm
Gates EMH656 Crank Case Breather Pipe Hose
ONLY
£24.58
Quantity:
Weight 0.072 kg
Type Hose, crankcase ventilation
Function Hose, crankcase ventilation
Extra Description febi Plus

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 179744 Crank Case Breather Pipe Hose
ONLY
£24.57
Quantity:
Function Hose, crankcase ventilation
Colour Black
Material Plastic
Inner diameter 2 5 mm
Inner diameter 1 8 mm
Type Hose, crankcase ventilation
Hose Length 420 mm
Gates EMH148 Crank Case Breather Pipe Hose
ONLY
£24.55
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Material Plastic
Colour White-transparent
Function Fuel Hose
Type Fuel Hose
Placement on Vehicle between fuel filter and high pressure pump
Gates MFL1089 Moulded Fuel Hose / Pipe
ONLY
£24.45
Quantity:
Material NBR (nitrile butadiene rubber)
Colour Black
Type Hose, fuel overflow
Function Hose, fuel overflow
Gates MFL1248 Moulded Fuel Hose / Pipe
ONLY
£24.44
Quantity:
Colour White-transparent
Function Fuel Hose
Hose Length 1000 mm
Material Plastic
Type Fuel Hose
Inner diameter 1 9 mm
Inner diameter 2 6 mm
Placement on Vehicle Between high pressure pump and fuel press. regulating valve
Gates MFL1229 Moulded Fuel Hose / Pipe
ONLY
£24.42
Quantity:
Material Plastic
Colour Black
Type Fuel Hose
Function Fuel Hose
Gates MFL1195 Moulded Fuel Hose / Pipe
ONLY
£24.39
Quantity:
Function Hose, crankcase ventilation
Material NBR (nitrile butadiene rubber)
Hose Length 214 mm
Inner diameter 2 10 mm
Type Hose, crankcase ventilation
Colour Black
Inner diameter 1 10 mm
Gates EMH512 Crank Case Breather Pipe Hose
ONLY
£24.36
Quantity:
Operating temperature to +100 °C
Material EPDM (ethylene propylene diene Monomer (M-class) rubber)
Operating temperature from -40 °C
Hose length 0.6 m
Function Hose
Working pressure 2.3 bar
Inner diameter 2 50 mm
Inner diameter 1 50 mm
Type Hose
Gates 7036 Extra Service Curved Hose
ONLY
£24.35
Quantity:
Inner diameter 1 16 mm
Inner diameter 2 16 mm
Material Plastic
Colour Black
Function Hose, crankcase ventilation
Type Hose, crankcase ventilation
Hose Length 355 mm
Placement on Vehicle from cylinder head cover to oil separator
Gates EMH420 Crank Case Breather Pipe Hose
ONLY
£24.35
Quantity:
Inner diameter 2 10 mm
Hose Length 250 mm
Material NBR (nitrile butadiene rubber)
Colour Black
Function Hose, crankcase ventilation
Inner diameter 1 10 mm
Type Hose, crankcase ventilation
Gates EMH129 Crank Case Breather Pipe Hose
ONLY
£24.26
Quantity:
Placement on Vehicle Fuel pump to filter
Material Plastic
Inner diameter 1 8 mm
Colour Black
Inner diameter 2 7 mm
Type Fuel Hose
Hose Length 570 mm
Function Fuel Hose
Gates MFL1375 Moulded Fuel Hose / Pipe
ONLY
£24.26
Quantity:
Colour Black
Type Fuel Hose
Function Fuel Hose
Material Plastic
Gates MFL1290 Moulded Fuel Hose / Pipe
ONLY
£24.10
Quantity:
Inner diameter 1 18 mm
Colour Black
Type Hose, crankcase ventilation
Hose Length 280 mm
Function Hose, crankcase ventilation
Material Plastic
Gates EMH726 Crank Case Breather Pipe Hose
ONLY
£24.09
Quantity:
No image found
ONLY
£23.96
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Inner diameter 2 17.5 mm
Weight 0.119 kg
Material Rubber
Inner diameter 17.5 mm
Function Hose, crankcase ventilation
Extra Description febi Plus
Inner diameter 1 13.5 mm
Type Hose, crankcase ventilation
Hose Length 295 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 45531 Crank Case Breather Pipe Hose
ONLY
£23.60
Quantity:
Hose Length 420 mm
Inner diameter 1 14 mm
Inner diameter 2 14 mm
Material Rubber
Colour Black
Function Hose, crankcase ventilation
Type Hose, crankcase ventilation
Gates EMH413 Crank Case Breather Pipe Hose
ONLY
£23.40
Quantity:
Function Fuel Hose
Colour White-transparent
Material Plastic
Inner diameter 1 9 mm
Inner diameter 2 6 mm
Placement on Vehicle Between high pressure pump and fuel press. regulating valve
Hose Length 855 mm
Type Fuel Hose
Gates MFL1131 Moulded Fuel Hose / Pipe
ONLY
£23.30
Quantity:
Title Junior Clips M/S 16-18mm - Pack of 50

Additional Information

From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
  • Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
  • 7mm A/F screw fastening
  • Used in applications such as securing fuel lines and heater hoses
  • Ideal for small bore hoses with relatively low pressures, where little clamping force is required
  • Mini clips, also known as nut & bolt clips
Jubilee NB1618 Junior Clips M/S 16-18mm Pack Of 50
ONLY
£23.29
Quantity:
Hose Length 455 mm
Placement on Vehicle High pressure pump to fuel distributor
Material Plastic
Colour White-transparent
Function Fuel Hose
Inner diameter 2 6 mm
Inner diameter 1 6 mm
Type Fuel Hose
Gates MFL1207 Moulded Fuel Hose / Pipe
ONLY
£23.18
Quantity:
Part number: 100654
Inner diameter 5 mm
Function Fuel Hose
Suited for fuel type Ethanol Blended Petrol (E10)
Type Fuel Hose
Weight 0.02 kg
Length 230 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 100654 FUEL HOSE
ONLY
£23.16
Quantity:

Page 11 of 30
Hose & Pipe

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more