Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 12 of 30
Results 331 - 360 of 888
Part number: 47228
Important compatibility info
| Placement on Vehicle | Upper |
| Function | Hose, crankcase ventilation |
| Weight | 0.039 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£23.09
£23.09
Part number: NB1416
Important compatibility info
| Title | Junior Clips M/S 14-16mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.09
£23.09
Part number: EMH246
Important compatibility info
| Inner diameter 1 | 12 mm |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Material | Plastic |
| Hose Length | 173 mm |
| Inner diameter 2 | 12 mm |
ONLY
£22.92
£22.92
Part number: MFL1179
Important compatibility info
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 8 mm |
| Hose Length | 315 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
ONLY
£22.89
£22.89
Part number: EMH410
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 2 | 16.5 mm |
| Hose Length | 300 mm |
| Inner diameter 1 | 16.5 mm |
| Material | Plastic |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£22.87
£22.87
Part number: 100503
Important compatibility info
| Weight | 0.102 kg |
| Material | Thermoplast |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.86
£22.86
Part number: EMH738
Important compatibility info
| Colour | Black |
| Hose Length | 270 mm |
| Inner diameter 2 | 18 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Material | Plastic |
| Inner diameter 1 | 25 mm |
ONLY
£22.84
£22.84
Part number: MFL1252
Important compatibility info
| Function | Fuel Hose |
| Type | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
ONLY
£22.79
£22.79
Part number: EMH258
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 447 mm |
| Inner diameter 1 | 16 mm |
| Inner diameter 2 | 16 mm |
| Type | Hose, crankcase ventilation |
ONLY
£22.71
£22.71
Part number: 36903
Important compatibility info
| Weight | 0.17 kg |
| Colour | Black |
| Placement on Vehicle | from cooling pipe to hydraulic pump |
| Length | 615 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hydraulic Hose, steering |
| Driver Position | for left-hand/right-hand drive vehicles |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.67
£22.67
Part number: MFL1264
Important compatibility info
| Inner diameter 1 | 8 mm |
| Function | Hose, fuel overflow |
| Type | Hose, fuel overflow |
| Inner diameter 2 | 8 mm |
| Colour | Blue |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 495 mm |
ONLY
£22.64
£22.64
Part number: 7034
Important compatibility info
| Operating temperature to | +100 °C |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.6 m |
| Function | Hose |
| Working pressure | 2.5 bar |
| Inner diameter 2 | 40 mm |
| Inner diameter 1 | 40 mm |
| Type | Hose |
ONLY
£22.63
£22.63
Part number: EMH472
Important compatibility info
| Hose Length | 180 mm |
| Inner diameter 2 | 18 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 24 mm |
ONLY
£22.59
£22.59
Part number: 170094
Important compatibility info
| Function | Hose, crankcase ventilation |
| Height | 45 mm |
| Width | 110 mm |
| for OE number | 11 15 7 533 341 |
| Inner diameter 2 | 13 mm |
| Inner diameter 1 | 16 mm |
| Weight | 0.041 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.56
£22.56
Part number: MFL1320
Important compatibility info
| Material | Plastic |
| Inner diameter 1 | 8 mm |
| Colour | Black |
| Inner diameter 2 | 8 mm |
| Type | Fuel Hose |
| Hose Length | 500 mm |
| Function | Fuel Hose |
ONLY
£22.46
£22.46
Part number: EMH452
Important compatibility info
| Hose Length | 168 mm |
| Material | Plastic |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Inner diameter 2 | 16 mm |
| Inner diameter 1 | 16 mm |
ONLY
£22.45
£22.45
Part number: 171008
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Height | 35 mm |
| Width | 90 mm |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 23 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Weight | 0.066 kg |
| Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.44
£22.44
Part number: 46302
Important compatibility info
| Weight | 0.029 kg |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Upper |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.42
£22.42
Part number: EMH742
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Hose Length | 365 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 18 mm |
ONLY
£22.35
£22.35
Part number: 3225-00070
Important compatibility info
ONLY
£22.34
£22.34
Part number: 30785
Important compatibility info
| Title | Mini Hose Clips M/S 14-16mm - Pack of 50 |
Additional Information
- For Fuel Pipes & small hoses
- Zinc Plated
- Mild Steel
ONLY
£22.31
£22.31
Part number: NB0911
Important compatibility info
| Title | Junior Clips M/S 9-11mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£22.29
£22.29
Part number: 30784
Important compatibility info
| Title | Mini Hose Clips M/S 13-15mm - Pack of 50 |
Additional Information
- For Fuel Pipes & small hoses
- Zinc Plated
- Mild Steel
ONLY
£22.24
£22.24
Part number: EMH510
Important compatibility info
| Inner diameter 2 | 15 mm |
| Hose Length | 163 mm |
| Inner diameter 1 | 17 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
ONLY
£22.20
£22.20
Part number: 47223
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Weight | 0.035 kg |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£22.13
£22.13
Part number: EMH657
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Function | Hose, crankcase ventilation |
| Hose Length | 220 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 18.5 mm |
| Inner diameter 1 | 18.5 mm |
ONLY
£22.12
£22.12
Part number: 5MSP
Important compatibility info
| Title | Hose Clips M/S 5 90-120mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.
The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£22.06
£22.06
Part number: NB0709
Important compatibility info
| Title | Junior Clips M/S 7-9mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£22.01
£22.01
Part number: 194771
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 10 mm |
| Inner diameter 2 | 8 mm |
| Weight | 0.43 kg |
| Type | Hose, crankcase ventilation |
| Wall Thickness | 3.5 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£21.98
£21.98
Part number: 10.5MSP
Important compatibility info
| Title | Hose Clips M/S 10.5 235-267mm - Box of 5 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£21.96
£21.96
Page 12 of 30
Hose & Pipe
