Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 19 of 29
Results 541 - 570 of 862
Part number: 31025
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 12.0mm - Pack Of 5 |
Additional Information
- ISO9001:2008
- Push Fit Connector
ONLY
£14.42
£14.42
Part number: EMH663
Important compatibility info
| Material | Plastic |
| Hose Length | 240 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 14 mm |
| Colour | Black |
| Inner diameter 2 | 14 mm |
ONLY
£14.41
£14.41
Part number: 48813
Important compatibility info
| Weight | 0.070 kg |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| for OE number | 116 094 07 91 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£14.40
£14.40
Part number: EMH591
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Inner diameter 1 | 13 mm |
| Colour | Black |
| Inner diameter 2 | 13 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 450 mm |
| Function | Hose, crankcase ventilation |
ONLY
£14.39
£14.39
Part number: BHC1100
Important compatibility info
| Width | 18 mm |
| Quantity | 5 |
| Diameter From | 34 mm |
| Diameter To | 37 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£14.35
£14.35
Part number: 30811
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 8mm x 56mm - Pack Of 10 |
Additional Information
- ISO9001:2008
- Push Fit Connector
- 8.0mm ID x 56.0mm
ONLY
£14.29
£14.29
Part number: 37208
Important compatibility info
ONLY
£14.29
£14.29
Part number: BHC1108
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 63 mm |
| Diameter To | 68 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£14.28
£14.28
Part number: 37213
Important compatibility info
ONLY
£14.28
£14.28
Part number: MFL1381
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Type | Fuel Hose |
| Inner diameter 2 | 10 mm |
| Hose Length | 360 mm |
| Function | Fuel Hose |
| Inner diameter 1 | 10 mm |
| Placement on Vehicle | between supply pump and fuel filter |
ONLY
£14.25
£14.25
Part number: PPC05
Important compatibility info
| Title | Petrol Pipe Clips 12-13mm - Pack of 25 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. The Pearl Fuel Hose Clips come in a pack of 25 and can be used when replacing or securing fuel hoses which are between 12mm – 13mm. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pack of 25
- These clips do not lose their shape when tightened
- Specifically designed for petrol hose
ONLY
£14.24
£14.24
Part number: 37211
Important compatibility info
ONLY
£14.15
£14.15
Part number: EMH120
Important compatibility info
| Inner diameter 2 | 18 mm |
| Inner diameter 1 | 18 mm |
| Hose Length | 200 mm |
| Material | ACM (Polyacrylate) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£14.05
£14.05
Part number: FHC1107
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 59 mm |
| Diameter To | 63 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£14.03
£14.03
Part number: 30790
Important compatibility info
| Title | Hose Clips S/S 12-20mm - Pack of 10 |
Additional Information
- DIN 3017
- Band Thickness 0.7mm
- No. 304 SS Marine Grade
- Stainless Steel
- SS Hoseclip 12-20mm
ONLY
£14.02
£14.02
Part number: BHC1105
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 51 mm |
| Diameter To | 55 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.91
£13.91
Part number: BHC1106
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 55 mm |
| Diameter To | 59 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.91
£13.91
Part number: FHC1105
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 51 mm |
| Diameter To | 55 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.91
£13.91
Part number: FHC1106
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 55 mm |
| Diameter To | 59 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.91
£13.91
Part number: 33854
Important compatibility info
| Hose Length | 220 mm |
| Function | Hose, crankcase ventilation |
| Weight | 0.072 kg |
| for OE number | 102 094 25 87 |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£13.87
£13.87
Part number: MFL1340
Important compatibility info
| Material | Plastic |
| Function | Fuel Hose |
| Hose Length | 555 mm |
| Inner diameter 2 | 8 mm |
| Colour | Black |
| Inner diameter 1 | 8 mm |
| Type | Fuel Hose |
ONLY
£13.86
£13.86
Part number: MFL1380
Important compatibility info
| Inner diameter 1 | 10 mm |
| Colour | Black |
| Inner diameter 2 | 9 mm |
| Type | Fuel Hose |
| Material | Plastic |
| Placement on Vehicle | Fuel Tank |
| Function | Fuel Hose |
| Hose Length | 630 mm |
ONLY
£13.86
£13.86
Part number: 1MMS
Important compatibility info
| Title | Hose Clips M/S 1M 32-45mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£13.86
£13.86
Part number: EMH490
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Hose Length | 140 mm |
| Inner diameter 2 | 16 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 17 mm |
ONLY
£13.81
£13.81
Part number: EMH597
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Inner diameter 1 | 30.5 mm |
| Inner diameter 2 | 30.5 mm |
| Hose Length | 372 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£13.81
£13.81
Part number: 35188
Important compatibility info
| Title | Cyclone Male Coupling - 3/8in. BSP - Pack Of 2 |
Additional Information
- Pack of 2
- For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
- Quick Release coupling
- BSP Thread
ONLY
£13.62
£13.62
Part number: 1XMS
Important compatibility info
| Title | Hose Clips M/S 1X 30-40mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£13.60
£13.60
Part number: PPC02
Important compatibility info
| Title | Petrol Pipe Clips 9mm - Pack of 25 |
Additional Information
Over time small parts and componentry can deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. The Pearl Petrol pipe clips come in a pack of 25 and can be used when replacing or securing fuel hoses which are 9mm in size. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Pack of 25
- These clips do not lose their shape when tightened
- Specifically designed for petrol hose
ONLY
£13.60
£13.60
Part number: JSC043MSP
Important compatibility info
| Title | Superclamp M/S 40-43mm - Pack of 5 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible.
The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- Chromium VI free finish on all materials
- Assembly by manual or automatic tools
- Solid trunion maximises torque
- Bridge piece ensures 360 deg seal
- Smooth band protects hose
- Single nut adjustment
ONLY
£13.56
£13.56
Part number: BHC1103
Important compatibility info
| Width | 20 mm |
| Quantity | 5 |
| Diameter From | 43 mm |
| Diameter To | 47 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£13.52
£13.52
Page 19 of 29
Hose & Pipe
