Important compatibility info
Function | Dryer, air conditioning |
Type | Dryer, air conditioning |
Weight | 0.764 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, driver cab suspension |
Type | Bellow, driver cab suspension |
Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Inner diameter 2 | 32.19 mm |
Inner diameter 1 | 19.08 mm |
Function | Connecting Rod, air compressor |
Type | Connecting Rod, air compressor |
Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 400 mm |
Outer diameter | 121 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Weight | 3.23 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Number of Wings | 7 |
Weight | 0.775 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.0 kg |
Inner diameter | 233.5 mm |
Outer diameter | 446 mm |
Placement on Vehicle | Rear Axle |
Height | 66 mm |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.190 kg |
Function | Release Fork, clutch |
Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
Important compatibility info
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Min. Length | 339 mm |
Weight | 3.580 kg |
External Thread Size | M12 x 1,25 |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Pipe Diameter | 51 mm |
Piston conrod diameter | 22 mm |
Function | Shock Absorber |
Shock Absorber Design | Suspension Strut |
Max. Length | 518 mm |
Paired article numbers | 193112 |
Placement on Vehicle | Front Axle Right |
Mounting points diameter | 13 mm |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.640 kg |
Placement on Vehicle | Rear Axle |
Length | 335 mm |
Outer diameter | 116 mm |
Function | Suspension Spring |
Wire Diameter | 13.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 33 |
Weight | 2.396 kg |
Number of Teeth, ABS ring | 43 |
ABS Ring Diameter | 82 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023