Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 9 of 28
Results 241 - 270 of 830
Part number: EMH375
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Hose Length | 215 mm |
| Inner diameter 2 | 18 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 1 | 18 mm |
ONLY
£28.55
£28.55
Part number: NB1820
Important compatibility info
| Title | Junior Clips M/S 18-20mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£28.51
£28.51
Part number: EMH723
Important compatibility info
| Hose Length | 350 mm |
| Function | Hose, crankcase ventilation |
| Material | Plastic |
| Inner diameter 1 | 25 mm |
| Colour | Black |
| Inner diameter 2 | 18.5 mm |
| Type | Hose, crankcase ventilation |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£28.43
£28.43
Part number: MFL1032
Important compatibility info
| Hose Length | 212 mm |
| Inner diameter 2 | 15 mm |
| Inner diameter 1 | 15 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
ONLY
£28.41
£28.41
Part number: 185113
Important compatibility info
| Inner diameter | 16 mm |
| Function | Hydraulic Hose, steering |
| Material | NBR (nitrile butadiene rubber) |
| Type | Hydraulic Hose, steering |
| Outer diameter | 24 mm |
| Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£28.39
£28.39
Part number: 194910
Important compatibility info
| Length | 283 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.266 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£27.87
£27.87
Part number: MFL1217
Important compatibility info
| Function | Fuel Hose |
| Material | Plastic |
| Type | Fuel Hose |
| Colour | Black |
ONLY
£27.68
£27.68
Part number: EMH083
Important compatibility info
| Inner diameter 1 | 13.5 mm |
| Inner diameter 2 | 13 mm |
| Hose Length | 370 mm |
| Material | Rubber |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£27.56
£27.56
Part number: 3225-00073
Important compatibility info
ONLY
£27.50
£27.50
Part number: EMH084
Important compatibility info
| Hose Length | 285 mm |
| Inner diameter 1 | 28.5 mm |
| Inner diameter 2 | 14.5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£27.45
£27.45
Part number: 109617
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Weight | 0.050 kg |
| Height | 60 mm |
| Width | 130 mm |
| Inner diameter 1 | 15.8 mm |
| Inner diameter 2 | 12.7 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Additional Information 2 | with quick couplers |
| Hose Length | 320 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£27.43
£27.43
Part number: 32604
Important compatibility info
| Weight | 0.131 kg |
| for OE number | 32 41 1 094 306 |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
| Placement on Vehicle | from fluid reservoir to hydraulic pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£27.42
£27.42
Part number: MFL1097
Important compatibility info
| Hose Length | 450 mm |
| Inner diameter 2 | 4.5 mm |
| Inner diameter 1 | 12.5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | Fuel pump to filter |
ONLY
£27.42
£27.42
Part number: BHC1003
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 50 mm |
| Diameter To | 70 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£27.39
£27.39
Part number: FHC1003
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 50 mm |
| Diameter To | 70 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£27.39
£27.39
Part number: 100272
Important compatibility info
| Weight | 0.018 kg |
| Outer diameter | 8 mm |
| Function | Fuel Hose |
| Type | Fuel Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£27.32
£27.32
Part number: BHC1002
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 40 mm |
| Diameter To | 60 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£26.86
£26.86
Part number: FHC1002
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 40 mm |
| Diameter To | 60 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£26.86
£26.86
Part number: EMH139
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Inner diameter 1 | 18.5 mm |
| Inner diameter 2 | 18 mm |
| Hose Length | 370 mm |
| Type | Hose, crankcase ventilation |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£26.60
£26.60
Part number: EMH135
Important compatibility info
| Inner diameter 1 | 14.5 mm |
| Function | Hose, crankcase ventilation |
| Hose Length | 284 mm |
| Inner diameter 2 | 14.5 mm |
| Type | Hose, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
ONLY
£26.57
£26.57
Part number: EMH197
Important compatibility info
| Hose Length | 280 mm |
| Inner diameter 1 | 25.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 17.5 mm |
ONLY
£26.57
£26.57
Part number: EMH508
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Hose Length | 210 mm |
| Inner diameter 2 | 17 mm |
| Inner diameter 1 | 17 mm |
ONLY
£26.57
£26.57
Part number: 0SS
Important compatibility info
| Title | Hose Clips S/S 0 16-22mm - Box of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 304 grade stainless steel
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£26.40
£26.40
Part number: 100271
Important compatibility info
| Weight | 0.022 kg |
| Outer diameter | 8 mm |
| Function | Fuel Hose |
| Length | 170 mm |
| Type | Fuel Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£26.37
£26.37
Part number: 3225-00072
Important compatibility info
ONLY
£26.37
£26.37
Part number: BHC1001
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 35 mm |
| Diameter To | 50 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£26.35
£26.35
Part number: FHC1001
Important compatibility info
| Width | 12 mm |
| Quantity | 10 |
| Diameter From | 35 mm |
| Diameter To | 50 mm |
| Function | Fastening Clamp, charge air hose |
| Type | Fastening Clamp, charge air hose |
ONLY
£26.35
£26.35
Part number: EMH146
Important compatibility info
| Function | Hose, crankcase ventilation |
| Colour | Black |
| Material | ACM (Polyacrylate) |
| Inner diameter 2 | 13.5 mm |
| Hose Length | 437 mm |
| Inner diameter 1 | 18.5 mm |
| Type | Hose, crankcase ventilation |
ONLY
£26.35
£26.35
Part number: EMH199
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
ONLY
£26.35
£26.35
Part number: EMH633
Important compatibility info
| Hose Length | 270 mm |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 18 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£26.22
£26.22
Page 9 of 28
Hose & Pipe
