Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 4 of 32
Results 91 - 120 of 959
Part number: MFL1104
Important compatibility info
| Inner diameter 1 | 8 mm |
| Hose Length | 1755 mm |
| Inner diameter 2 | 5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
ONLY
£67.07
£67.07
Part number: MFL1061
Important compatibility info
| Inner diameter 1 | 13 mm |
| Inner diameter 2 | 6 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Hose Length | 1370 mm |
ONLY
£67.04
£67.04
Part number: 30931
Important compatibility info
| Title | Servo Hose - 12.7mm ID - 10m |
Additional Information
- Burst Pressure 25 BAR
- 5 BAR Pressure
- 10m coil
ONLY
£66.86
£66.86
Part number: EMH433
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
ONLY
£66.85
£66.85
Part number: MFL1064
Important compatibility info
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 8 mm |
| Hose Length | 790 mm |
| Material | Plastic |
| Colour | Black |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | Between supply pump and fuel rail |
ONLY
£65.64
£65.64
Part number: 36041
Important compatibility info
| Title | Drive Push-Pin Rivets - Assorted - Pack of 350 |
Additional Information
- Box 350 Pieces
- Suitable for general application on many vehicles & popular motorcycles
- Assorted Box Drive Rivets
ONLY
£64.96
£64.96
Part number: EMH368
Important compatibility info
| Hose Length | 555 mm |
| Inner diameter 2 | 10 mm |
| Inner diameter 1 | 10 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£64.14
£64.14
Part number: MFL1324
Important compatibility info
| Function | Hose, fuel overflow |
| Colour | Black |
| Material | Plastic |
| Type | Hose, fuel overflow |
ONLY
£64.14
£64.14
Part number: 1099
Important compatibility info
| Title | O Clip Pincer - Side Closing |
Additional Information
Whether you want to secure high pressure pipes, or use clips for a wealth of other uses within a car, Jubilee clips are the industry standard. To secure the clips firmly in place a tool is required to crimps the ends.
The 1099 Jubilee O Clip Pincer With Hole will prove the perfect tool to help you in your work. The mild steel zinc protected pincers have a hole in the centre and will help in keeping clips which are also known as hose clamps or hose clips completely bound secure.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel construction
- Designed for when access to the clip ear is difficult
- Side closing pincer for crimping the ears of 'O' clips or constant velocity (CV) boot clips
ONLY
£63.84
£63.84
Part number: 3230-12081
Important compatibility info
ONLY
£63.15
£63.15
Part number: MFL1208
Important compatibility info
| Function | Fuel Hose |
| Type | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
ONLY
£63.15
£63.15
Part number: 23924
Important compatibility info
| Operating temperature to | +100 °C |
| Material | NBR (nitrile butadiene rubber) |
| Operating temperature from | -40 °C |
| Hose length | 0.91 m |
| Working pressure | 1.4 bar |
| Inner diameter 2 | 38 mm |
| Inner diameter 1 | 38 mm |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£62.97
£62.97
Part number: EMH635
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Hose Length | 460 mm |
| Inner diameter 1 | 18.5 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 18 mm |
ONLY
£62.37
£62.37
Part number: 4281-17134
Important compatibility info
ONLY
£61.17
£61.17
Part number: EMH660
Important compatibility info
| Hose Length | 535 mm |
| Material | Plastic |
| Inner diameter 1 | 16 mm |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Inner diameter 2 | 16 mm |
| Type | Hose, crankcase ventilation |
ONLY
£60.01
£60.01
Part number: MFL1045
Important compatibility info
| Function | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Type | Fuel Hose |
ONLY
£59.86
£59.86
Part number: 170612
Important compatibility info
| Weight | 0.303 kg |
| Placement on Vehicle | Right |
| Hose Length | 470 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 14 mm |
| Inner diameter 1 | 12 mm |
| Height | 80 mm |
| Width | 180 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£59.19
£59.19
Part number: MFL1188
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Type | Fuel Hose |
| Function | Fuel Hose |
ONLY
£59.19
£59.19
Part number: QFH106
Important compatibility info
| Outer diameter | 11.0 mm |
| Function | Fuel Hose |
| Hose Length | 25000 mm |
| Type | Fuel Hose |
| Inner diameter | 4.0 mm |
ONLY
£59.19
£59.19
Part number: HT100P
Important compatibility info
| Title | High Torque Clips S/S 80-100mm - Pack of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Twice the tightening torque of standard worm drive hose clips which creates more than twice the band tension for those stubborn leakage and high vibration applications
- All stainless steel construction
- Breaking torque of Jubilee high torque is comparable to conventional 'T' bolt clamp of equal size
- Recommended tightening torque 17 Nm (150 lb. in)
- Jubilee high torque clips for applications that require extra high levels of tightening torque such as spiral wound wire reinforced suction hose
- Pack of 10
ONLY
£59.07
£59.07
Part number: EMH200
Important compatibility info
| Hose Length | 281 mm |
| Inner diameter 1 | 10.5 mm |
| Inner diameter 2 | 9.5 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£58.20
£58.20
Part number: 4040-04110
Important compatibility info
ONLY
£57.21
£57.21
Part number: MFL1170
Important compatibility info
| Inner diameter 2 | 6 mm |
| Inner diameter 1 | 9 mm |
| Hose Length | 800 mm |
| Material | Plastic |
| Colour | White-transparent |
| Function | Fuel Hose |
| Type | Fuel Hose |
| Placement on Vehicle | Between high pressure pump and fuel press. regulating valve |
ONLY
£57.21
£57.21
Part number: EMH226
Important compatibility info
| Colour | Black |
| Inner diameter 1 | 16 mm |
| Hose Length | 830 mm |
| Inner diameter 2 | 16 mm |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Material | Plastic |
ONLY
£56.73
£56.73
Part number: MFL1058
Important compatibility info
| Function | Fuel Hose |
| Colour | White-transparent |
| Material | Plastic |
| Inner diameter 1 | 8 mm |
| Inner diameter 2 | 8 mm |
| Hose Length | 690 mm |
| Type | Fuel Hose |
| Placement on Vehicle | between fuel filter and injection pump |
ONLY
£56.42
£56.42
Part number: EMH450
Please enter your vehicle information above to check this fits your vehicle!
Important compatibility info
| Hose Length | 360 mm |
| Inner diameter 2 | 18.5 mm |
| Inner diameter 1 | 23 mm |
| Material | Rubber |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£56.22
£56.22
Part number: EMH664
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Inner diameter 1 | 18 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 18 mm |
| Hose Length | 900 mm |
| Function | Hose, crankcase ventilation |
ONLY
£56.22
£56.22
Part number: MB1708
Important compatibility info
| Title | 11mm Multiband Banding Handy Pack M/S - 10 Metre |
Additional Information
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 3.4Nm recommended tightening torque
- 0.82 band thickness
- Wide range of uses such as heating, ventilation and air conditioning (HVAC), sign fixing, agricultural and emergency industrial repair applications
- Complete with 25 standard housings and screws
- 10 metres of 11mm width continuously threaded rolled band which can be cut to length
- Self assembly system
- Quick, versatile and convenient banding that can be cut to a desired length
ONLY
£55.83
£55.83
Part number: EMH230
Important compatibility info
| Hose Length | 215 mm |
| Inner diameter 2 | 12 mm |
| Inner diameter 1 | 16 mm |
| Material | Plastic |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Placement on Vehicle | from cylinder head cover to oil separator |
ONLY
£55.23
£55.23
Part number: 103273
Important compatibility info
| Function | Hydraulic Hose, steering |
| Material | CR (chloroprene rubber), NBR (nitrile butadiene rubber) |
| Length | 400 mm |
| Weight | 0.221 kg |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£55.06
£55.06
Page 4 of 32
Hose & Pipe
