Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 54 of 59
Results 1591 - 1620 of 1761
Part number: LASTRAY
Important compatibility info
| Title | Socket Holder, Carlyle Tools |
Additional Information
Socket Holder, Carlyle Tools
- Five row locking socket holder tray holds shallow or deep.
- Locks sockets in place by a simple twist to the right
- Casn be used for metric or SAE sockets.
- Socket Holder
- Carlyle Tools
ONLY
£101.13
£101.13
Part number: NCB9101
Important compatibility info
| Title | CV Boot Fitting Tool - Pneumatic |
Additional Information
- Pneumatic tool that utilises existing airline systems in garages
- Manufactured using a high quality resin based plastic giving it a robust but lightweight design – ideal for everyday garage life
- Suitable for use with the full range of NAPA CV boots as well as other branded ‘stretchy’ boots
- The piston design allows the boot to be expanded and then disconnected from the airline – no need to drag it round the garage
- The boot remains fully expanded until the release is pressed
- Reduces fitting time to approximately 20 minutes
- One model that covers all vehicle models
- Working pressure 4 to 8 bar
- Supplied ready assembled
- Features a patented built in safety mechanism and is fully CE Certified
- The Machinery Directive 2006/42/EC
- BS EN ISO 12100:2010 Safety of machinery
- BS EN ISO 4414:2010 Pneumatic fluid power
ONLY
£101.84
£101.84
Part number: 4932480438
Important compatibility info
| Title | Hex socket ShW 1in deep 65mm-1pc |
Additional Information
Hex socket ShW 1in deep 65mm-1pc
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
ONLY
£104.68
£104.68
Part number: QJB100T
Important compatibility info
| Length | 465 mm |
| Width | 148 mm |
| Function | Mounting Tool, bellow |
| Weight | 2 kg |
| Extra Description | Duraboot |
| Type | Mounting Tool, bellow |
ONLY
£105.64
£105.64
Part number: 7525
Important compatibility info
| Title | Diesel Injector Remover |
Additional Information
- Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines
- Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
- Engines: 1.6L TDi CR diesel & 2.0L TDi
- Equivalent to: OEM T10402, T10415
- Use in accordance with OEM instructions
- No solenoid removal required
ONLY
£105.76
£105.76
Part number: 4932493576
Important compatibility info
| Title | Burrs TC 6x12.7mm set-5pc |
Additional Information
Burrs TC 6x12.7mm set-5pc
- According to DIN 8033.
- Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
- Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
- Includes: Types B ,C ,D, H, M.
- Type C: Cylindrical ball nose for top and side cutting.
- Type D: Ball for milling holes and creating concave cuts.
- Type H: Flame for contouring.
- Type M: Cone for angled edges and narrow contours.
ONLY
£108.64
£108.64
Part number: 4932464944
Important compatibility info
| Title | Metric & Imperial 1/4in. ratchet + socket set (50pc) |
Additional Information
1/4 50 pc Drive Ratchet.+ Socket Set SAE + Metric
- 90 tooth design with 4 °of arc swing for tight work spaces.
- Comes with a removable inner tray perfectly designed to be stored.
- Sockets are stamped with measurements on the flat side for easy-to-read visibility.
- All metal design for maximum durabilty.
- FOUR FLAT™ sides on socket deter rolling.
- Slim profile head with flush direction lever offers better accessibility.
ONLY
£108.79
£108.79
Part number: 4932480431
Important compatibility info
| Title | Hex socket ShW 1in deep 39mm-1pc |
Additional Information
Hex socket ShW 1in deep 39mm-1pc
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Best fitting thanks to 6 gripping points.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Dual hole design and groove for security accessories.
ONLY
£109.74
£109.74
Part number: 61-0304
Important compatibility info
| Title | Socket Set - Metric |
Additional Information
Forged From High Quality Chrome Molybdenum Alloy Steel, Radius Corner Design For Better Gripping Of Fastener & Chamfered Openings For Faster Socket Fit Over Fastener
- Forged from high quality chrome molybdenum alloy steel
- Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
- Phosphate
ONLY
£109.87
£109.87
Part number: 5934
Important compatibility info
| Title | Timing Tool Kit - Alfa Romeo/Fiat Multiair |
Additional Information
- Supplied in metal storage case with instructions and application list
- Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
- Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
ONLY
£110.62
£110.62
Part number: 7317
Important compatibility info
Additional Information
- Application: Ford B-Max, C-Max, EcoSport, Fiesta, Focus, Grand C-Max, Grand Tourneo Connect, Mondeo, Tourneo Connect, Tourneo Courier, Transit Connect, Transit Courier from 2012 onwards
- Engine codes include: 1.0lt EcoBoost M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, M1DA, M2DA, M1DD, M2DC, M1JC, M1JJ, P4JA, P4JB, P4JC, P4JD, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB, M2DB, SFDB, M2GA, M2GB, M1CA, M1CB, SFCA, SFCB, SFCC, SFCD
- Equivalent to the Ford OEM tools 303-1611-01 & 303-1611-02
- Use to tighten the crankshaft pulley bolt to the correct torque and angle
ONLY
£111.25
£111.25
Part number: AW24
Important compatibility info
| Title | Adjustable Wrench - 24in. Long |
Additional Information
Wrench is capable of firmly capturing nuts and bolts with ease, covering any and all applications the professional technician will encounter on the job site
- Features a patented low-rattle design
- laser-etched size indexing
- 60% thicker ergonomic handle design
- 25% wider jaws providing the ability to work on larger fasteners
- Wrench can be used in extremely tight situations where other wrenches would fail
ONLY
£111.73
£111.73
Part number: 4932464945
Important compatibility info
| Title | 3/8in. Drive Ratchet + Socket Set Metric (32pc) |
Additional Information
3/8in.in. Drive Ratchet + Socket Set Metric (32pc)
- 90 tooth design with 4 °of arc swing for tight work spaces.
- Comes with a removable inner tray perfectly designed to be stored.
- Sockets are stamped with measurements on the flat side for easy-to-read visibility.
- All metal design for maximum durabilty.
- FOUR FLAT™ sides on socket deter rolling.
- Slim profile head with flush direction lever offers better accessibility.
ONLY
£111.74
£111.74
Part number: 4273
Important compatibility info
| Title | Timing Tools - Land Rover/Jaguar V6 |
Additional Information
- Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions
- Engine Code 276D T 2004-2007
- Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
- Camshaft Sprocket aligning tool 303-1132
- Camshaft sprocket timing pins 303-1126
ONLY
£112.58
£112.58
Part number: RWS612M
Important compatibility info
| Title | Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces) |
Additional Information
Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces)
- Features a non-slip ratchet end and non-slip open end.
- Full polish chrome finish on each wrench resists corrosion while maintaining the look and feel of a new product.
- This design provides an incredibly precise turning radius for work in tight spaces.
- The 90 tooth count gear allows 4 degree arc swing.
- Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces)
ONLY
£113.12
£113.12
Part number: 4932430564
Important compatibility info
| Title | M18 Led Inspection Light Bare unit |
Additional Information
M18 IL-0 - M18™ LED inspection light
- Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting
- Thanks to its compact design it operates in locations other lights cannot
- TRUEVIEW™ high definition lighting
- Pivoting 45° forward & backward head allows for 180° coverage
- Flexible battery system: works with all MILWAUKEE® M18™ batteries
- 2 adjustable metal hooks for hanging in vertical and horizontal position
- Protected against splashing water at all angles (IP24)
ONLY
£114.45
£114.45
Part number: 4933451261
Important compatibility info
| Title | High Output Bay Light Bare Unit |
Additional Information
M12 SLED-0 - M12™ LED spot light
- Up to 35% longer beam distance than competition - 650 m intense and highly focused beam of light with 750 lumens
- The reflector produces narrow centre beam with wide peripheral beam
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
- Especially useful for long range identification - utility pole/high voltage cable inspection, inspection of long runs of conduit, cast or copper pipe, under ground work, bridge work
- 45° rubber overmold stand for aiming beam upward during prolonged use when the light is equipped with a compact battery pack
- Up to 8 hours of run time with an M12™ REDLITHIUM™ 4.0 Ah battery pack
- TRUEVIEW™ high definition lighting
- Metal housing and impact resistant polycarbonate lens with gasketed rubber cap which protects from moisture for harsh jobsite conditions
- Dual function trigger allows momentary or lock-on use
- Battery fuel gauge displays battery status
- Hand wrist lanyard to keep the light safe and handy
- Ergonomic grip with rubber overmold - enhances user comfort and grip during use
ONLY
£114.45
£114.45
Part number: 4933451906
Important compatibility info
| Title | 10:1 Infrared Temp-Gun |
Additional Information
2267-40 10:1 Infrared Temp-Gun
- Up to -30°C to 400°C temperature range
- Raised overmolding protects lens and screen from direct impact
- 10:1 distance to spot ratio a 1 m spot from 10 m away
- Premium LCD display for high readability
- Simplified buttons and setup for faster scanning
ONLY
£114.45
£114.45
Part number: AFG5H36
Important compatibility info
| Title | Airforce MK4 Tyre Inflator - Truck - Twin Clip-On |
Additional Information
PCL has built on its world-leading tyre inflation knowledge to create the new AIRFORCE® MK4 Truck Tyre Inflator On the face of it, the AIRFORCE® MK4 Truck Tyre Inflator looks exactly the same as the AIRFORCE® MK4 Tyre Inflator. The big difference is that the AIRFORCE® MK4 Truck Tyre Inflator is capable of inflating up to 174 psi (12 bar), a substantial hike from the already impressive 138 psi (9.6 bar). The AIRFORCE® MK4 Truck Tyre Inflator is a gauge which not only answers the market need for a higher pressure inflator but also provides one which can withstand harsh tyre shop environments. The new AIRFORCE® MK4 Truck Tyre Inflator is set to become the heavy duty solution for providing safe, cost-effective and trouble-free high pressure inflation with guaranteed accuracy. This in turn will give truck tyre users the benefits of extended tyre life, increased fuel economy and improved safety. The reliable and versatile AIRFORCE® MK4 Truck Tyre Inflator, with its aluminium die cast body and linear gauge represents the best product on the market for both indoor and outdoor applications, even in extreme weather.
- AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications
- Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
- Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
- Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
- Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
- Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2017
- Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 15 bar / 218 psi Inflation Flow: 500 l/min / 13 cfm Operating temperature: -25 to 55 °C Hose Length: 3.6 m / 12 ft Tyre Valve Connection: Twin clip-on Calibration: 0-174 psi / 0-12 bar
ONLY
£115.38
£115.38
Part number: 4832
Important compatibility info
| Title | Manual Brake Bleeder - 2 Litre |
Additional Information
- Manual brake bleeder
- Easy to use and designed for single handed operation
- 2 litre container supplied with European adaptor
- Is supplied along with a European adaptor
- Designed to use with most brake master cylinder reservoirs measuring 1in. to 3in.
ONLY
£116.02
£116.02
Part number: RWFLS612M
Important compatibility info
| Type | Flexible Ratcheting Stubby Wrench Set |
| Title | Spanner Set - Stubby - Metric - 12 Piece |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Full Polish Chrome
- 12 Piece
- 6 Point
- Non- Slip Ends
- 90 Tooth Count
- 8 - 19 mm
- Features a non-slip ratchet end and non-slip open end
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£119.11
£119.11
Part number: 4083
Important compatibility info
| Title | Timing Tool Kit - VW 3 Cylinder |
Additional Information
- Timing tools for Volkswagen Lupo and Polo 1.2 litre engines
- 2 and 3 cylinder
- 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
ONLY
£119.42
£119.42
Part number: GAT4635
Important compatibility info
| Additionally Required Parts | GAT4635 |
| Function | Mounting Tools, timing belt |
| Type | Mounting Tools, timing belt |
ONLY
£121.25
£121.25
Part number: 4933447791
Important compatibility info
| Title | M12 Sub Compact Polisher / Sander Bare Unit Bare Unit |
Additional Information
M12 BPS-0 - M12™ sub compact polisher / sander
- Long run time allows frequent task completion with one battery charge
- Supplied with polishing pad, sanding pad, polishing sponge white, polishing sponge yellow, lambswool, side handle
- Large capacity of 76 mm polishing sponge and 50 mm sanding pad size for fast job completion
- Spindle lock allows fast, tool free accessory change
- Detachable 2 position side handle
- Variable 2 speed selection (0-2800 / 0-8300 RPM) for both polishing and sanding applications
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Compact design with only 130 mm allows access to hard areas
ONLY
£123.57
£123.57
Part number: 4933451023
Important compatibility info
| Title | M18 Air Fan Bare Uit |
Additional Information
M18 AF-0 - M18™ air fan
- Adjustable head allows the user to utilise the fan in various heights and positions over a range of 120°
- Efficient air circulation circulates the air within a 3.6 m x 4 m room
- Compact design with integrated carry handle to maximise portability
- Rubber feet provide stability and no surface scratches
- AC/DC, allows the user to run on M18™ REDLITHIUM™ or AC power when available
- Fixing points gives the user the option to wall mount the fan if needed
- AC adaptor supplied
- Flexible battery system: works with all MILWAUKEE® M18™ batteries
- Three speed settings for optimised air flow up to 1290 meters per hour
- Three hours run time on speed three with a M18™ REDLITHIUM™ 4.0 Ah battery pack
ONLY
£124.00
£124.00
Part number: 48229214
Important compatibility info
| Title | Pry Bar Set (4pc) |
Additional Information
Pry Bar Set (4pc)
- I-Beam design for added durability.
- All-metal core for improved durability.
- Hammer-ready strike cap improves leverage when working in tight and tricky spaces.
- Comfortable Tri-Lobe handles for better grip.
- All-chrome shafts for increased durability.
- Curved claw design reduces damage when pulling nails.
ONLY
£125.47
£125.47
Part number: RWLB6M
Important compatibility info
| Title | Spanner Set - Box End - Extra Long - Metric - 6 Piece |
Additional Information
This design provides an incredibly precise turning radius for work in tight spaces
- Full Polish Chrome
- 6 Piece
- 6 Point
- Non- Slip Ends
- 90 Tooth Count
- 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18 & 17 x 19 mm
- Features a non-slip ratchet end and non-slip open end
- The 90 tooth count gear allows 4 degree arc swing
ONLY
£126.46
£126.46
Part number: 5317
Important compatibility info
Additional Information
- Part of the Laser Truck range
- Black phosphate finish, heavy duty construction
- 65mm
- OEM 03.364.20.03.0
- For 6 to 9 tonne conventional and Eco axles (type H/K/N)
ONLY
£128.93
£128.93
Page 54 of 59
Workshop Tools
