Workshop Tools

• High quality hot-forging process provides a performance exceeding ASME standard
• Full popular range of metric sizes fits most circumstances
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

General Information

Timing Tool Kit - Land-Rover/Ford/PSA/Jaguar. Timing Tool Kit - Land-Rover/Ford/PSA/Jaguar

• Peugeot Boxer and 807 2.2 Hdi 05 onwards
• OEM cross reference and instructions included
• Applications Ford S-Max/Galaxy 2.0 and 2.2 TDCi 2006 onwards and Rover Freelander II TD4 2.2 Duratorq TDCi 06 onwards
• Specific kit supplied for Ford, Land Rover, PSA and Volvo 2.0, 2.2 DOHC common rail diesel engines

• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Features a non-slip ratchet end and non-slip open end
• 8 - 19 mm
• 90 Tooth Count
• Non- Slip Ends
• 6 Point
• 12 Piece
• Full Polish Chrome

• The 90 tooth count gear allows 4 degree arc swing

• Professional quality
• Twin hold on connector
• PSI/BAR (1 BAR = 100kPa)
• Rubber boot protection for gauge
• Easy to read gauge

• SHOCKWAVE™ IMPACT DUTY Screwdriver bits
• Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• FOUR FLAT™ sides on socket deter rolling.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2014
• Piston & Seal Design - reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Twin hold-on Calibration: 0-138 psi / 0-9.6 bar

• The 90 tooth count gear allows 4 degree arc swing.
• This design provides an incredibly precise turning radius for work in tight spaces.
• Full polish chrome finish on each wrench resists corrosion while maintaining the look and feel of a new product.
• Features a non-slip ratchet end and non-slip open end.

• Carlyle Metric Stubby Ratcheting Wrench Set (12 Pieces)

• Registered Design
• 2 second button hold for calibration toggle
• 3 units of calibration toggle as standard - psi, bar & kPa
• Replaceable 2 X AAA batteries power unit (supplied)
• Individually tested and certified against national approved gauges
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• Permanently backlit in use, auto off after 10 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Higher pressure range for multiple applications 4 – 250 psi range (including trucks) - Versatile and flexible saving time and money
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Small ‘stubby’ body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy

• Accuracy: ExceedsCompliant with BS EN12645:2014 Reading Accuracy: 0.1 psi / 0.01 bar / 1 kPa Max Inflation Pressure: 250 psi / 17.2 bar / 1723 kPa Max Inlet Pressure: 260 psi / 18.0 bar / 1795 kPa Inflation Flow (@ 190 psi / 13 bar): 500 l/min / 18 CFM Calibration: 4-250 psi / 0.3-17.2 bar / 30-1723 kPa Battery Type: 2 x AAA (supplied) Hose Length: 0.53 m / 21 in Tyre Valve Connection: Twin hold-on Calibration: 4-250 psi / 0.3-17.2 bar / 30-1723 kPa

• Mirror polished Chrome plated finish

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• Rotary hammer dust extraction solutions.
• Outlet nozzle: ⌀ 37 mm outside / ⌀ 32 mm inside. Replacement sealing lips (2 pcs): 4931448564. Replacement brush: 4931448565
• Brush insert to improve suction and extraction. Brushes to be removed for coring applications.

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

• Protected against splashing water at all angles (IP24)
• 2 hooks for hanging
• High powered 2.1A USB charger charges tablets, smart phones, MP3 players and other electronic devices
• Best-in-class performance - outstanding light output 400+ lumens, designed to illuminate large areas
• TRUEVIEW™ high definition lighting
• Job site durability - rugged designed with impact resistant lens to withstand abusive job site conditions
• 180° - 360° adjustable beam - versatile design, allows the user to select between area lighting and task lighting
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Slim profile head with flush direction lever offers better accessibility.
• FOUR FLAT™ sides on socket deter rolling.
• All metal design for maximum durabilty.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• Comes with a removable inner tray perfectly designed to be stored.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• Supplied with a ball inflation needle, presta chuck, inflator nozzle and schrader chuck
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life (Battery sold separately)
• Nozzle & hose storage, easily stores 66 cm hose and attachments, with an all-brass schrader chuck
• Illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge
• Auto shut-off technology inflates to users pre-selected pressure for highly accurate inflation
• Anti-vibration stand with all rubber feet for no movement while inflating
• High efficiency motor & pump
• Compact lightweight design for fast inflation of car, light truck and compact equipment tires