Workshop Tools

• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• SHOCKWAVE™ IMPACT DUTY Screwdriver bits
• Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• FOUR FLAT™ sides on socket deter rolling.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Flexible battery system: works with all MILWAUKEE M12 batteries
• Bright LED light for increased visibility of soldering application
• Temperature monitoring to maintain heat throughout tough applications
• Dual colour LED lights to notify user: flashing green when tool is heating up solid green when the tool is ready for operation and solid red when the tool is off but the tip is hot to touch until the red LED turns off
• Tool free replaceable tips
• 3 locking head positions to work in multiple orientations 0° 45° 90°
• Quick heat up time: the tool is ready to use in 20 30 seconds

• Protected against splashing water at all angles (IP24)
• 2 hooks for hanging
• High powered 2.1A USB charger charges tablets, smart phones, MP3 players and other electronic devices
• Best-in-class performance - outstanding light output 400+ lumens, designed to illuminate large areas
• TRUEVIEW™ high definition lighting
• Job site durability - rugged designed with impact resistant lens to withstand abusive job site conditions
• 180° - 360° adjustable beam - versatile design, allows the user to select between area lighting and task lighting
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2014
• Piston & Seal Design - reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Twin hold-on Calibration: 0-138 psi / 0-9.6 bar

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• Professional quality
• Twin hold on connector
• PSI/BAR (1 BAR = 100kPa)
• Rubber boot protection for gauge
• Easy to read gauge

• Part of the PACKOUT™ modular storage system.
• IP 65 rated weather seal to keep out rain and jobsite debris.
• Enough storage capacity to fit power tools like circular saws, grinders, drill drivers.
• 34 kg weight capacity.
• Constructed with impact resistant polymers for jobsite durability.
• Quick-Adjust Dividers allow users to store and organize larger equipment and accessories, such as fittings, connectors or caulk.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• High quality hot-forging process provides a performance exceeding ASME standard
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight , Zero chamfer box end offer better bite on worn fasterners
• High visibility color filled size mark for easy identification during use
• Full range of Metric sizes for all Professional needs
• Premium Chrome Finish
• Anti-Slip open end
• Zero chamfer box end

• ASME Compliant

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

General Information

Engine Timing Tool Kit - GM engines.;, Engine Timing Tool Kit - GM engines;,..

• Instructions included
• Also fits Chevrolet Cruze, Orlando 1.4, 1.6, 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines
• Applications: Astra-G, Corsa-D, Insignia, Mervia, Signum, Vectra-C & Zafira-B 2003-2011
• Engine timing tool kit for GM engines fitted to Vauxhall/Opel and other vehicles 16v 1.6 and 1.8

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Interior organiser trays.
• Metal reinforced locking point.
• Constructed with impact resistant polymers for jobsite durability.
• Metal reinforced top handle for easier carrying (only on the large box).
• IP65 rated weather seal to keep out rain and jobsite debris.
• Metal reinforced corners.
• Part of the PACKOUT™ modular storage system.
• Mounting location for the ONE-KEY™ TICK ™.

• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 40 min / 80 min / 100 min / 124 min/ 180 min or less
• Recharges all M18™ and M12™ REDLITHIUM™ battery packs
• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 40 min / 70 min / 80 min / 90 min or less
• Charges MILWAUKEE® batteries on the go, perfect for tradesmen and other professional that can use the down time to re-charge their batteries using conventional 12V sockets

• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.
• Induction hardened cutting edges to cut even the hardest of materials.
• Steel blades are fully forged, hardened and tempered for best durability. Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• VDE (DIN EN/IEC 60900) certified tools. Tested to 10,000 volts and guaranteed to 1,000 volts. Tested against cold to -40°.
• Ergonomic grip with softgrip for comfortable handling and good grip.

• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2016
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 2.7 m / 9ft Tyre Valve Connection: Twin clip-on Calibration: 0-138 psi / 0-9.6 bar

• Impact rated socket extensions for facilitated bolt access in restricted areas.
• SHOCKWAVE IMPACT DUTY steel (chrome-molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Features a non-slip ratchet.
• 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 18 & 17 x 19 mm
• 90 Tooth Count
• Non- Slip Ends
• 6 Point
• 6 Piece
• Full Polish Chrome

• The 90 tooth count gear allows 4 degree arc swing