Workshop Tools

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Gripping zone with integrated wire bender for flat and round material.
• Two component handle design for comfortable handling and ergonomic grip.
• Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• Induction hardened cutting edges to cut even the hardest of materials.
• Integrated ring spanner to tighten or untighten metric bolts (M8 to M10).
• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.

• Durable socket rail for long-term storage.
• Stamped sizes for better visibility in all lighting conditions.
• Single forged piece adds durability in high torque applications.
• Slim design for better access in tight spaces.
• FOUR FLAT™ sides on socket deter rolling and provide a wrench-ready design.

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Includes: (7) 3 in. PH: #2 (2), PZ: #2 (2), Star: T-20, T-25, T-30
• Includes: (1) 2.6 in. Impact Quick Change Chuck
• Contents designed specifically for Professional Technicians.
• Bit design gives even power distribution
• Includes: (3) 1.8 in. Magnetic Nut Driver: 8mm, 10mm, 12mm
• Torsion area absorbs torque peaks which reduced stress at the tip during heaving loading
• Includes: (14) 1.25 in. PH: #1, #2 (2), #3, PZ: #1, #2, #3, Star: T-10, T-15, T-20, T-25, T-27, T-30, T-40
• Unique bit design and multi-stage production process ensures unrivaled service life of bit
• Includes: (17) 2 in. PH: #1, #2(2), #3, PZ: #1, #2, #3, Star: T-10, T-15, T-20, T-25 (2), T-27 (2), T-30 (2), T-40

• Personalized Blowcase
• Gauge with 0.01mm Increments
• Shock-Proof Gauge
• Transverse Arm for Fine Adjustment
• Identifies Vertical and Lateral Wobble
• 3-Point Clamp Stand for Safe Mounting onto Shock Absorber
• Measures Radial and Axial Offsets on Brake Discs

• Shallow Metric Socket Set
• 12 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Internal blade storage for extra blades.
• Supplied with 12″ / 24 Tpi blade.
• Tough metal frame, supports higher tension (25,000 PSi / 250 lbs).
• Will accept up to 12″ blades.
• Overmould handle ensures secure grip and user comfort.

• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• Plastic Carry Case With Foam Inlay
• Includes Product Identification & Help Guide
• Fit & Remove TPMS Components With Ease
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Includes AFG4 0-140 psi & 0-9.6 bar 0.53m Hose SCO Connector
• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2015
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Single clip-on Calibration: 0-138 psi / 0-9.6 bar

• Flexible battery system: works with all MILWAUKEE M12 batteries
• Bright LED light for increased visibility of soldering application
• Temperature monitoring to maintain heat throughout tough applications
• Dual colour LED lights to notify user: flashing green when tool is heating up solid green when the tool is ready for operation and solid red when the tool is off but the tip is hot to touch until the red LED turns off
• Tool free replaceable tips
• 3 locking head positions to work in multiple orientations 0° 45° 90°
• Quick heat up time: the tool is ready to use in 20 30 seconds

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Optimized head geometry for secure grip on fasteners to reduce rounding of nuts.
• Durable storage tray.
• 15°angled heads for better access.
• Ink-filled size labels for easy and quick size identification.
• I-beam handle for more comfort while applying high torque.

• Over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.
• Durable metal faces preventing chipping on contact.
• Precision balanced design and steel shot-filled head for optimised control.

• All-chrome shafts for increased durability.
• Comfortable Tri-Lobe handles for better grip.
• Hammer-ready strike cap improves leverage when working in tight and tricky spaces.
• All-metal core for improved durability.
• I-Beam design for added durability.
• Curved claw design reduces damage when pulling nails.