Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 17753 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
External Thread Size | M10 x 1,25, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter Kit, automatic transmission |
Weight | 0.490 kg |
Seal Material | ACM (Polyacrylate) |
Additional Information 2 | with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (104093)
- 1x Febi Hydraulic Filter, automatic transmission (105778)
Important compatibility info
Min. Length | 562 mm |
Additional Information 2 | with screw |
Weight | 6.358 kg |
External Teeth, Wheel Side | 37 |
External Teeth, Diff.Side | 27 |
Wheel Sided Joint Diameter | 89 mm |
Thread Size | M16x1,5 |
Placement on Vehicle | Front Axle Left |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 82.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Operating Mode | Automatic |
Paired article numbers | 31581 |
Weight | 3.6 kg |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M22 x 1,5 |
Weight | 7.5 kg |
Length | 493 mm |
Material | Steel |
Outer diameter | 246 mm |
Capacity | 20 l |
Operating Pressure | 15.5 bar |
Function | Air Tank, compressed-air system |
Type | Air Tank, compressed-air system |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 226 mm. 335 mm |
Additional Information | with piston |
External Thread Size | M16 x 1,5, M24 x 1,5 |
Function | Bellow, air suspension |
Placement on Vehicle | Rear Axle |
Type | Bellow, air suspension |
Thickness | 360 mm. 205 mm |
Weight | 9.0 kg |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5, M12 x 1,5 |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Length | 229.5 mm |
Additional Information | with counter nut |
Outer diameter | 36 mm |
Spanner Size | 32 |
Weight | 0.441 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 342 mm |
Outer diameter | 155 mm |
Inner diameter | 80 mm |
Filter type | Filter Insert |
Function | Air Filter |
Weight | 0.906 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 54626-26000 S2 |
Placement on Vehicle | Front Axle |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Weight | 0.204 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (170470)
- 2x Febi Protective Cap/Bellow, shock absorber (185758)
Important compatibility info
Weight | 0.196 kg |
Length | 244 mm |
Height | 50 mm |
Width | 183 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 93 mm |
Outer diameter | 90 mm |
Inner diameter | 17 mm |
Function | Bush, driver cab suspension |
Weight | 0.505 kg |
Type | Bush, driver cab suspension |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Type | Connecting Rod, air compressor |
Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40 mm |
Thickness | 6 mm |
Inner diameter | 32 mm |
Function | Gasket, timing case |
Weight | 0.020 kg |
Type | Gasket, timing case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Weight | 0.159 kg |
Combi Switch Function | with park light function, with indicator function, with high beam function |
Function | Steering Column Switch |
Type | Steering Column Switch |
Number of Connectors / Ports | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.73 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Width of castor bearing surface | 28.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.677 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 13 mm |
Outer diameter | 55 mm |
Inner diameter | 30 mm |
Function | Bearing, propshaft centre bearing |
Weight | 0.116 kg |
Bearing Type | Rolling Bearing |
Type | Bearing, propshaft centre bearing |
Replaces | 11365 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Length | 114 mm |
Width | 68 mm |
Material | Rubber/Metal |
Thickness | 126 mm |
Paired article numbers | 107737 |
Function | Mounting Bracket, shock absorber mounting (driver cab) |
Weight | 2.212 kg |
Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Function | Hydraulic Filter, automatic transmission |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 29423 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.25 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with lid |
Weight | 0.45 kg |
Outer diameter | 58.5 mm |
Inner diameter | 17 mm |
Number of Ribs | 5 |
Function | Alternator Freewheel Clutch |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178949 |
Weight | 3.895 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 296 mm |
Thickness | 65.6 mm |
Brake Disc Thickness | 10.5 mm |
Minimum thickness | 8.9 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Weight | 4.83 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Function | Mounting, engine |
Placement on Vehicle | Left |
Weight | 0.49 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Weight | 0.550 kg |
Function | Suspension Strut Support Mount |
External Thread Size | M8 x 1,25 |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain |
Number of Chain Links | 124 |
Chain Type | Simplex, Closed chain |
Weight | 0.345 kg |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Brake Hose |
Type | Brake Hose |
Weight | 0.2 kg |
Paired article numbers | 181346 |
Length | 507 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.934 kg |
Material | Cast Aluminium |
Number of Teeth | 18 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Placement on Vehicle | Front |
Material | Rubber/Metal |
Thickness | 38 mm |
Inner diameter | 53 mm |
Number of Holes | 6 |
Bolt Hole Circle Diameter | 105 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Width | 7 mm |
Outer diameter | 42 mm |
Inner diameter | 25 mm |
Function | Shaft Seal, camshaft |
Weight | 0.02 kg |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 57 mm |
Inner diameter 1 | 24 mm |
Material | Rubber |
Length | 100 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08019)
- 1x Febi Clamping Clip (38764)
- 1x Febi Gasket, transfer case (08020)
- 1x Febi Circlip (05336)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 0.265 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.304 kg |
Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right, Rear |
Material | Rubber/Metal |
Outer diameter | 49 mm |
Thickness | 70 mm |
Inner diameter | 14.3 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Number of hoses | 2 |
Internal Thread Size | M10 x 1 |
Weight | 0.367 kg |
Placement on Vehicle | Rear Axle Right |
Length | 346 mm |
Paired article numbers | 172682 |
Thread Length | 7 mm |
Type | Brake Hose |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 186 mm |
Additional Information 2 | with crown nut |
Spanner Size | 23 |
Paired article numbers | 196251 |
Weight | 0.715 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after catalytic converter |
Spanner Size | 22 |
Weight | 0.100 kg |
Cable Length | 477 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 49 mm |
External Thread Size | M26 x 1,5 |
Function | Pressure Relief Valve |
Opening Pressure | 17 bar |
Type | Pressure Relief Valve |
Weight | 0.09 kg |
Spanner Size | 32 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 4.055 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Material | Rubber |
Inner diameter | 9 mm |
Function | Radiator Hose |
Cooling Hose | from throttle body to distributor |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.090 kg |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Width | 245 mm |
Height | 32 mm |
Length | 359 mm |
Weight | 0.50 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 1.65 kg |
Placement on Vehicle | Front Axle |
Length | 130 mm |
Width | 71.3 mm |
Wear Warning Contact | incl. wear warning contact |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.551 kg |
Placement on Vehicle | Front Axle |
Length | 129.9 mm |
Width | 56.2 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 640 050 01 11 |
Weight | 0.162 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Placement on Vehicle | Rear Axle |
Length | 135 mm |
Outer diameter 1 | 18 mm |
Outer diameter 2 | 15 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 2 | 53 mm |
Length | 192 mm |
Additional Information 2 | with clamps |
Weight | 0.053 kg |
Inner diameter 1 | 13 mm |
Material | Thermoplastic polyester elastomer |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.177 kg |
Inner diameter 2 | 84 mm |
Material | Thermoplast |
Inner diameter 1 | 26 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175500)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 46 mm |
Material | Rubber, Rubber with fabric lining |
Outer diameter | 65 mm |
Inner diameter | 28 mm |
Function | Mounting, stabiliser bar |
Weight | 0.110 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Number of Chain Links | 58 |
Chain Type | Silent Chain, Closed chain |
Timing Chain Size | Z67 |
Weight | 0.161 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | Rear Axle |
Function | Repair Kit, suspension strut support mount |
Additional Information | with bump stop |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (14954)
- 1x Febi Suspension Strut Support Mount (14956)
- 1x Febi Rubber Buffer, suspension (01525)
- 1x Febi Protective Cap/Bellow, shock absorber (06985)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023