Important compatibility info
| Outer diameter | 116 mm |
| Thickness | 72 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 98 mm |
| Outer diameter 1 | 59 mm |
| Outer diameter 2 | 42 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 150 mm |
| Outer diameter | 150 mm |
| Thickness | 89.6 mm |
| Inner diameter | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (27163)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Shaft Seal, wheel hub (38868)
- 1x Febi Shaft Seal, wheel hub (27165)
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Voltage | 12 V |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with cable |
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Function | Wiper Motor |
| Driver Position | for right-hand drive vehicles |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Additional Information | with fastening/mounting material |
| Voltage | 12 V |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 112 mm |
| Width | 150 mm |
| Thickness | 121 mm |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Replaces | 29517 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Number of Connectors / Ports | 7 |
| Type | Ignition Coil |
| for OE number | 12 08 098 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 1920.GG |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 25 mm |
| Width | 32 mm |
| Material | Rubber |
| Thickness | 33 mm |
| Inner diameter | 18 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Material | Aluminium |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









