Important compatibility info
Weight | 0.003 kg |
Function | Seal, thermostat |
Type | Seal, thermostat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Number of Teeth | 18 |
Engine Management | Timing Chain |
Function | Sprocket, crankshaft |
Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 88 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 92 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (07997)
- 1x Febi Clamping Clip (45646)
- 1x Febi Clamping Clip (38758)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (07995)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Outer diameter | 36.6 mm |
Thickness | 52 mm |
Inner diameter | 16.2 mm |
Paired article numbers | 172372 |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.152 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.400 kg |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 82 mm |
Thickness | 110 mm |
Inner diameter | 26 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.354 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with ball bearing |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.155 kg |
Cable Length | 1760 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Weight | 3.436 kg |
Paired article numbers | 177893 |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.485 kg |
Placement on Vehicle | Left Rear |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.296 kg |
Length | 300 mm |
Outer diameter | 55 mm |
Filter type | In-Line Filter |
Type | Fuel filter |
Function | Fuel filter |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023