Important compatibility info
Filter type | Filter Insert, Activated Carbon Filter |
Driver Position | for right-hand drive vehicles |
Length | 288 mm |
Weight | 0.171 kg |
Function | Filter, cabin air |
Height | 30 mm |
Width | 212 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 184955 |
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 23 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Function | Drive Shaft |
Type | Drive Shaft |
Min. Length | 949 mm |
External Teeth, Diff.Side | 26 |
Weight | 7.538 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 31593 |
Function | Adjuster, braking system |
Placement on Vehicle | Left |
Weight | 3.3 kg |
Type | Adjuster, braking system |
Replaces | 20203 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Outer diameter | 276 mm |
Weight | 7.1 kg |
Length | 411.5 mm |
Capacity | 20 l |
Operating Pressure | 15.5 bar |
Function | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle Right, Rear, Front Axle Left, inner |
Material | Rubber/Metal |
Outer diameter | 65 mm |
Thickness | 55 mm |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 17 mm |
Weight | 0.496 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 106334 |
Function | Sensor, wheel speed |
Additional Information 2 | with retaining strap |
Weight | 0.085 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 577 mm |
Weight | 0.3 kg |
Type | Cable Pull, stowage box flap opener |
Function | Cable Pull, stowage box flap opener |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Additional Information | with gaskets/seals |
Height | 119 mm |
Outer diameter | 110 mm |
Filter type | Filter Insert |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Minimum thickness | 25 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 300 mm |
Thickness | 51.9 mm |
Brake Disc Thickness | 28 mm |
Rim Hole Number | 5 -Hole |
Weight | 7.74 kg |
Centering Diameter | 67 mm |
Bolt Hole Circle Diameter | 112 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
for OE number | 447 423 03 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Placement on Vehicle | Rear Axle |
Height | 14 mm |
Material | NBR (nitrile butadiene rubber), FPM (fluoride rubber) |
Outer diameter | 100 mm |
Inner diameter | 65 mm |
Type | Shaft Seal, differential |
Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.537 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 441 mm |
Core Width | 608 mm |
Core Depth | 16 mm |
Additional Information 2 | with dryer |
Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, outer |
Length | 325 mm |
Diameter | 1 mm |
Material | Steel |
Thickness | 360 mm |
Spanner Size | 18 |
Paired article numbers | 183957 |
Rod/Strut | Coupling Rod |
Thread Length | 22 mm |
Weight | 0.805 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission Type | 5-Speed Manual Transmission |
Weight | 0.850 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Transmission ID | F17 |
Inner length 1 | 847 mm |
Inner length 2 | 870 mm |
Outer length 1 | 1150 mm |
Outer length 2 | 1172 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Length | 222 mm |
Height | 30 mm |
Width | 198 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.484 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Material | Cast Steel |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.150 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
for OE number | 39310-02200 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 62 mm |
Weight | 0.30 kg |
Internal Thread Size | 3/4" - 16 UNF |
Function | Oil Filter |
Filter type | Spin-on Filter |
Height | 61 mm |
Outer diameter | 79 mm |
Type | Oil Filter |
Gasket outer diameter | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179032 |
Weight | 2.358 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 330 mm |
Thickness | 73.1 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 22.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Weight | 9.05 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Type | Interior Blower |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.914 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.309 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 45 mm. 26 mm |
Thickness | 91 mm |
Inner diameter | 16 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Weight | 0.630 kg |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Kingpin (01543)
- 2x Febi Bush, kingpin (01544)
- 2x Febi Lock Ring, steering knuckle (01551)
- 2x Febi Seal Ring, steering knuckle (01552)
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | with acoustic wear warning |
Weight | 1.453 kg |
Thickness/Strength 1 | 16.4 mm |
Placement on Vehicle | Front Axle |
Length | 149.4 mm |
Additional Information 2 | with piston clip, with staples |
Width | 52.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 38 mm |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Weight | 2.780 kg |
Additional Information | with electric motor |
Vehicle Equipment | for vehicles with electric parking brake |
Paired article numbers | 181363 |
Type | Brake Caliper |
Function | Brake Caliper |
Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.56 kg |
Paired article numbers | 08747 |
Function | Camshaft |
Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.441 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.816 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information 2 | with splash protection cover |
for OE number | 8D0 199 382 AP |
External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.54 kg |
Length | 162 mm |
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 10.9 |
Function | Cylinder Head Bolt Set |
Number of screws | 10 |
Screw length below head | 147 mm |
External Thread Size | M12 x 1,5 |
Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 10x Febi Cylinder Head Bolt (01825)
Important compatibility info
Weight | 0.960 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Steering arm type | Semi-trailing Arm, Control Arm |
Additional Information | with rubber mounts |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Width | 25.4 mm |
Number of Teeth | 134 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Weight | 0.292 kg |
Material | Rubber, Rubber with fabric lining |
Outer diameter | 41 mm. 47 mm |
Inner diameter | 33 mm. 39 mm |
Colour | Black |
Cooling Hose | from engine cooler to water pump |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.628 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 20499471 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.772 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.038 kg |
Additional Information | without kingpin |
Outer diameter | 54 mm |
Additional Information 2 | with bearing |
Paired article numbers | 15856 |
Function | Repair Kit, kingpin |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
- 1x Febi Bush, steering knuckle (15889)
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 177102 |
Weight | 0.860 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Spanner Size | 21 |
Colour | Black |
Number of Connectors / Ports | 1 |
Function | Oil Pressure Switch |
Switch point to | 0.5 bar |
Switch point from | 0.2 bar |
External Thread Size | M14 x 1,5 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.107 kg |
Cable Length | 856 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 11 V |
Spanner Size | 9 |
External Thread Size | M9 x 1 |
Length | 152 mm |
Function | Glow Plug |
Type | Glow Plug |
Glow Plug Type | after-glow capable |
Weight | 0.030 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 50.5 mm |
Outer diameter | 38.2 mm |
Additional Information | for multi-plate clutch |
Additional Information 2 | with bolts/screws, with cap |
Inner diameter | 7 mm |
Weight | 0.08 kg |
Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
Extra Description | febi Plus |
Clutch ID | Haldex Gen II / III |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1044 mm |
Additional Information | with nuts |
Rod/Strut | Push Rod |
Weight | 11.680 kg |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 60 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 18 mm |
Number of Teeth | 120 |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Weight | 0.09 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Weight | 0.034 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 77 mm |
Outer diameter | 96 mm |
Additional Information 2 | with seal ring |
Spanner Size | 32 |
Weight | 0.098 kg |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 30 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Extra Description | febi Plus |
External Thread Size | M14 x 1,5 |
Length | 355 mm |
Additional Information | with oil drain plug |
Function | Oil sump |
Spanner Size | 19 |
Weight | 2.19 kg |
Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Width | 39.6 mm |
Operating Mode | Automatic |
Housing material | Metal |
Function | Belt Tensioner, v-ribbed belt |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.1 kg |
Placement on Vehicle | Front Axle |
Length | 137 mm |
Width | 51 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Manufacturer | CITROEN DS PEUGEOT VAUXHALL |
Additional Information 2 | with fastening material |
Replaces | 16765 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.570 kg |
Placement on Vehicle | Front Axle |
Length | 188 mm |
Width | 73.3 mm. 80.7 mm |
Brake System | Lucas |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 128 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17792)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 142 mm |
Weight | 0.680 kg |
Mounting bores distance | 85 mm |
Fill Medium | Mineral Oil |
Type | Shift Cylinder |
Function | Shift Cylinder |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023