Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with lid |
| Width | 37.6 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Weight | 0.459 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.97
Important compatibility info
| Weight | 2.190 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 19647 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Replaces | 12421 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (22410)
- 2x Febi Mounting, control/trailing arm (09741)
£32.41
Important compatibility info
| for OE number | V7 598 862 80 |
| Weight | 1.9 kg |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Additionally required parts | Inlet/intake hose for turbocharger |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
Technical Information
Please check and compare the connection diameter to the crankcase breather before installation.Due to different diameters of the crankcase ventilation connection on the valve cover, a new inlet hose must also be replaced on the turbocharger.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.11
Important compatibility info
| Weight | 0.25 kg |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£253.34
Important compatibility info
| Inner diameter | 37 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Height | 109 mm |
| Outer diameter | 83 mm |
| Weight | 0.09 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.39
Important compatibility info
| Additional Information 2 | with cap |
| Additional Information | for multi-plate clutch |
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Outer diameter | 45.8 mm |
| Clutch ID | Haldex Gen II |
| Filter type | Filter Insert |
| Height | 55 mm |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Weight | 0.135 kg |
| Inner diameter | 12 mm |
| Extra Description | febi Plus |
| Gasket outer diameter | 51 mm |
| Gasket inner diameter | 45 mm |
| External Thread Size | M48 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.67
Important compatibility info
| Weight | 0.560 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.97
Important compatibility info
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Weight | 0.43 kg |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.46
Important compatibility info
| Cable Length | 600 mm |
| Number of circuits | 10 |
| Type | Cable Repair Set, boot lid |
| Function | Cable Repair Set, boot lid |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.54
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 7.680 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 49.3 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023