Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with lid |
| Width | 37.6 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Weight | 0.459 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.97
Important compatibility info
| Weight | 2.190 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 19647 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Replaces | 12421 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (22410)
- 2x Febi Mounting, control/trailing arm (09741)
£32.41
Important compatibility info
| for OE number | V7 598 862 80 |
| Weight | 1.9 kg |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Additionally required parts | Inlet/intake hose for turbocharger |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
Technical Information
Please check and compare the connection diameter to the crankcase breather before installation.Due to different diameters of the crankcase ventilation connection on the valve cover, a new inlet hose must also be replaced on the turbocharger.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.11
Important compatibility info
| Weight | 0.25 kg |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£253.34
Important compatibility info
| Inner diameter | 37 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Type | Oil Filter |
| Height | 109 mm |
| Outer diameter | 83 mm |
| Weight | 0.09 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.39
Important compatibility info
| Additional Information 2 | with cap |
| Additional Information | for multi-plate clutch |
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Outer diameter | 45.8 mm |
| Clutch ID | Haldex Gen II |
| Filter type | Filter Insert |
| Height | 55 mm |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Weight | 0.135 kg |
| Inner diameter | 12 mm |
| Extra Description | febi Plus |
| Gasket outer diameter | 51 mm |
| Gasket inner diameter | 45 mm |
| External Thread Size | M48 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.67
Important compatibility info
| Weight | 0.560 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.97
Important compatibility info
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Weight | 0.43 kg |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£119.53
Important compatibility info
| Cable Length | 600 mm |
| Number of circuits | 10 |
| Type | Cable Repair Set, boot lid |
| Function | Cable Repair Set, boot lid |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.52
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 7.680 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 49.3 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.22
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 6.210 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 275 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.89
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Cone Size | 15.8 mm |
| Weight | 0.43 kg |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.28
Important compatibility info
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Width | 126 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108924)
- 2x Febi Rubber Buffer, suspension (103966)
£18.74
Important compatibility info
| Operating Pressure | 19 bar |
| Inner thread 2 | M18 x 1,5 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Inner thread 1 | M26 x 1,5 mm |
| Weight | 2.200 kg |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£206.41
Important compatibility info
| Length | 301 mm |
| Height | 56 mm |
| Width | 173 mm |
| Function | Air Filter |
| Weight | 0.330 kg |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.70
Important compatibility info
| Weight | 0.037 kg |
| Placement on Vehicle | Rear Axle |
| Length | 38 mm |
| Material | Rubber |
| Thickness | 36 mm |
| Inner diameter | 16 mm |
| Colour | Black |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.27
Important compatibility info
| Weight | 0.678 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Additional Information | with fastening/mounting material |
| Outer diameter | 55 mm |
| Inner diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173387)
- 1x Febi Axle Nut, drive shaft (173828)
£20.02
Important compatibility info
| Weight | 0.9 kg |
| Placement on Vehicle | Rear Axle |
| Length | 104.6 mm |
| Width | 43.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Number of Coils | 7 |
| Outer diameter | 116 mm |
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.95
Important compatibility info
| Length | 180 mm |
| Width | 45 mm |
| Thickness | 126 mm |
| Inner diameter | 30 mm |
| Placement on Vehicle | Rear |
| Function | Suspension, propshaft |
| Weight | 0.65 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.34
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.089 kg |
| Cable Length | 1830 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.24
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 294 mm |
| Housing Diameter | 19 mm |
| Eject Force | 500 N |
| Stroke | 87 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 173 mm |
| Weight | 0.35 kg |
| Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.90
Important compatibility info
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 106 mm |
| Function | Joint, propshaft |
| Weight | 0.74 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.72
Important compatibility info
| Weight | 5.1 kg |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Length | 218 mm |
| Height | 84 mm |
| Width | 148 mm |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Weight | 0.322 kg |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.23
Important compatibility info
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 51 mm. 50 mm |
| Length | 222.5 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
| Additional Information | with Thrust Bearing |
| Weight | 4.695 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06012)
- 1x Febi Bush, kingpin (06013)
- 1x Febi Bush, kingpin (06014)
- 1x Febi Repair Kit, kingpin (06018)
- 1x Febi Lock Ring, steering knuckle (03728)
- 1x Febi Bush, steering knuckle (34565)
- 2x Febi Seal Ring, steering knuckle (03725)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Circlip (03729)
- 1x Febi Seal Ring, steering knuckle (05868)
£52.26
Important compatibility info
| Length | 430 mm |
| Spanner Size | 19 |
| Weight | 3.33 kg |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with seal ring |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.06
Important compatibility info
| Material | Plastic |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| for OE number | 03G 103 469 G |
| Weight | 1.544 kg |
| Colour | Black |
| Additional Information | with gasket/seal |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 0.860 kg |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 20 mm |
| Function | Ball Joint |
| Mounting points diameter | 12.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | 12023 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.38
Important compatibility info
| Hole Spacing | 220 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Weight | 3.900 kg |
| Inner diameter | 75 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 264 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.26
Important compatibility info
| Length | 135 mm |
| Outer diameter | 48 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Weight | 2.530 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.39
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.391 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.715 kg |
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 185 mm. 210 mm |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37094)
- 1x Febi Nut (36331)
£21.16
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | inner |
| Outer diameter | 90 mm |
| Thickness | 59 mm |
| Inner diameter | 11 mm. 44 mm |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.52
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 351 mm |
| Outer diameter | 178 mm |
| Function | Suspension Spring |
| Number of Coils | 5.3 |
| Weight | 3.83 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Function | Sensor, oil pressure |
| Weight | 0.106 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 0.85 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.29
Important compatibility info
| Outer diameter | 20 mm |
| Opening Temperature | 83 °C |
| Additional Information | with gasket/seal, with temperature sensor |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Weight | 0.37 kg |
| Number of Connectors / Ports | 2 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.89
Important compatibility info
| Forward- /Backflow | Supply Line |
| Function | Oil Pipe, charger |
| Type | Oil Pipe, charger |
| Weight | 0.139 kg |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.42
Important compatibility info
| Weight | 7.68 kg |
| Rotor Style | perforated/vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.06
Important compatibility info
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Weight | 2.888 kg |
| Inner diameter | 32 mm |
| Width | 73 mm |
| Outer diameter | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (171097)
- 1x Febi Centering Bolt, crankshaft pulley (33655)
£96.81
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.039 kg |
| Function | Sensor, wheel speed |
| Cable Length | 525 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.30
Important compatibility info
| for OE number | 1K0 122 291 J |
| Type | Coolant Flange |
| Function | Coolant Flange |
| Weight | 0.03 kg |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.88
Important compatibility info
| Additional Information 2 | with dryer |
| Weight | 2.287 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 391 mm |
| Core Width | 647 mm |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 0.05 kg |
| Shape/Form | triangular |
| Type | Reflector |
| Fulfils ECE norm | R3 |
| Function | Reflector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.15
Important compatibility info
| Placement on Vehicle | Rear Axle Lower, Front |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.71 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Function | Air filter kit |
| Width | 109.5 mm |
| Filter type | Filter Insert |
| Weight | 0.290 kg |
| Type | Air filter kit |
| Height | 41.5 mm |
| Length | 273 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.57
Important compatibility info
| Weight | 1.475 kg |
| Width | 26 mm |
| Outer diameter | 161 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with bolts/screws |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26872)
- 4x Febi Centering Bolt, crankshaft pulley (33554)
£68.10
Important compatibility info
| Weight | 3.053 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179065 |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.26
Important compatibility info
| Weight | 7.050 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 292 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023