Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 108 mm |
| Inner diameter | 8.1 mm |
| Thread Length | 54 mm |
| Thread Type | with left-hand thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.17
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 7 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.55
Important compatibility info
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.15
Important compatibility info
| Max. Length | 338 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 79 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Dust Cover | with dust cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.79
Important compatibility info
| Thickness | 94 mm |
| Inner diameter | 42 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 143 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 175 mm |
| Thickness | 18 mm |
| Inner diameter | 135 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.93
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 4 |
| Function | Sensor, speed |
| Length | 85 mm |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.07
Important compatibility info
| Inner diameter | 81 mm |
| Function | Shaft Seal, wheel hub |
| Material | NBR (nitrile butadiene rubber) |
| Additional Information | with sealing lip |
| Outer diameter | 100 mm |
| Thickness | 10 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.26
Important compatibility info
| Inner diameter | 74 mm |
| Thickness | 9 mm |
| Material | NBR (nitrile butadiene rubber) |
| Additional Information | with sealing lip |
| Placement on Vehicle | Front Axle |
| Type | Shaft Seal, wheel hub |
| Outer diameter | 94 mm |
| Function | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 67.5 mm |
| Width | 58 mm |
| Material | Rubber |
| Inner diameter | 19 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.95
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 200 mm |
| Extra Description | ProKit |
| Rod/Strut | Coupling Rod |
| External Thread Size | M24 x 1,5 |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.36
Important compatibility info
| Hole Spacing | 107 mm |
| Placement on Vehicle | Rear Axle |
| Length | 140 mm |
| Outer diameter | 34 mm |
| Mounting points diameter | 14.5 mm |
| Function | Fastening Bolt, stabiliser bar |
| Type | Fastening Bolt, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.31
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 902 955 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.90
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Length | 220 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.51
Important compatibility info
| Length | 45.8 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.51
Important compatibility info
| Inner diameter 2 | 62 mm |
| Function | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 210 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
£12.77
Important compatibility info
| Internal Thread Size | M42 x 1,5 |
| Thickness | 178 mm |
| Pressure | 20 bar |
| Function | Air Dryer Cartridge, compressed-air system |
| Outer diameter | 137 mm |
| Thread Type | with right-hand thread |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with seal ring, without integrated oil separator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.42
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Type | Clutch Booster |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.58
Important compatibility info
| Length | 570 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.54
Important compatibility info
| Placement on Vehicle | Left |
| for OE number | 51855515 |
| Function | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.83
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 51855484 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.82
Important compatibility info
| Outer diameter | 145 mm |
| Thickness | 10 mm |
| Inner diameter | 96 mm |
| Type | Shaft Seal |
| Function | Shaft Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information | with two sealing lips |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 100 mm |
| Thickness | 10 mm |
| Inner diameter | 80 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.43
Important compatibility info
| Placement on Vehicle | Front Axle, inner |
| Length | 64 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber with fabric lining |
| Inner diameter | 30 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.46
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 44.5 mm |
| Inner diameter | 23.5 mm |
| Function | Mounting, stabiliser bar |
| Length | 47 mm |
| Placement on Vehicle | Front Axle, inner |
| Width | 45 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.49
Important compatibility info
| Function | Knock Sensor |
| Number of Connectors / Ports | 2 |
| Type | Knock Sensor |
| for OE number | 55190562 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.98
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 373 mm |
| Inner diameter | 62 mm. 16 mm |
| Spanner Size | 41 |
| Paired article numbers | 40092 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39673)
- 1x Febi Nut (38356)
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
£38.07
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 373 mm |
| Inner diameter | 16 mm. 62 mm |
| Spanner Size | 41 |
| Paired article numbers | 40091 |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with nut, with clamps, with steering bellow |
| Type | Tie Rod |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39674)
- 1x Febi Nut (38356)
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
£38.07
Important compatibility info
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 10 mm |
| Brake Disc Thickness | 12 mm |
| Rotor Style | Solid |
| Bolt Hole Circle Diameter | 130 mm |
| Thickness | 71.5 mm |
| Outer diameter | 305 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.27
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 305 mm |
| Thickness | 71.5 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 91 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.63
Important compatibility info
| Paired article numbers | 40097 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right Front |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.29
Important compatibility info
| Assignment plan scheme number | 1 |
| Working length | 4.0 m |
| DIN / ISO | 12098, 1185, 3731 |
| Type | Adaptor, electric filament |
| Temperature range from | -40 °C |
| Material | PU (Polyurethane) |
| Voltage | 24 V |
| Additional Information 2 | with plug |
| Function | Adaptor, electric filament |
| Port / Connector type | 15 to 2x7 |
| Number of Connectors / Ports | 15. 7 |
| Version | Aftermarket |
| Connecting plug material | Plastic |
| Temperature range to | 85 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.09
Important compatibility info
| Working length | 3.5 m |
| Material | PU (Polyurethane) |
| Number of Connectors / Ports | 7 |
| Voltage | 24 V |
| Additional Information 2 | with plug |
| Temperature range from | -40 °C |
| DIN / ISO | 1185 - Typ N |
| Type | Coiled Cable |
| Function | Coiled Cable |
| Paired article numbers | 40102 |
| Version | Aftermarket |
| Connecting plug material | Plastic |
| Temperature range to | 85 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.02
Important compatibility info
| Chain Type | Duplex, with chain lock |
| Timing Chain Size | D53HP |
| Function | Link, timing chain |
| Type | Link, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.84
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.36
Important compatibility info
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
| for OE number | 81.25520.0171 |
| External Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.46
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Thickness | 40 mm |
| Type | Sensor, coolant temperature |
| for OE number | 51.27421.0151 |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.54
Important compatibility info
| Length | 60 mm |
| Material | PA (polyamide) |
| Spanner Size | 22 |
| Function | Sensor, coolant temperature |
| Switch Point | 150 °C |
| Number of Connectors / Ports | 2 |
| Colour | Black |
| Thread Length | 4.5 mm |
| Type | Sensor, coolant temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.34
Important compatibility info
| Length | 209 mm |
| Material | Rubber |
| Type | Tightening Strap, wing |
| Thickness | 20 mm |
| Width | 29 mm |
| Function | Tightening Strap, wing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.57
Important compatibility info
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Outer diameter | 70 mm |
| Track rollers material | Metal |
| Width of castor bearing surface | 31 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.48
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Inner diameter | 15 mm |
| Outer diameter | 78 mm |
| Material | Metal |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 15 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.38
Important compatibility info
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 38 mm |
| Outer diameter 1 | 70 mm |
| Outer diameter 2 | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.31
Important compatibility info
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Paired article numbers | 40129 |
| Additional Information 2 | with bearing |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Placement on Vehicle | both sides |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
£137.42
Important compatibility info
| Paired article numbers | 40141 |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31523)
- 1x Febi Tie Rod End (39955)
£27.05
Important compatibility info
| Operating Mode | Hydraulic |
| Spanner Size | 19 |
| Function | Tensioner, timing chain |
| for OE number | 271 050 09 11 |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.25
Important compatibility info
| Number of Ribs | 7 |
| Length | 1753 mm |
| Width | 30 mm |
| Operating Mode | Automatic |
| Function | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
| Outer diameter | 70 mm |
| Track rollers material | Metal |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (40126)
- 1x Febi V-Ribbed Belt (29033)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (40127)
£123.98
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle, Upper |
| Quality/ Grade | 10 |
| Bolt Head/Nut Design | External Hexagon |
| Screw length below head | 95 mm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Spanner Size | 16 |
| Type | Mounting and Bolting Kit, control/trailing arm |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, control arm (40156)
- 1x Febi Nut (22263)
£8.98
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter | 81 mm |
| Outer diameter | 106 mm |
| Material | MVQ (silicone rubber) |
| Type | Charge Air Hose |
| Hose Length | 397 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.90
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40164 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (33523)
- 1x Febi Nut (40161)
£122.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023