Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Inner Tie Rod |
| Length | 309 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.43
Important compatibility info
| Inner diameter 2 | 57 mm |
| Function | Bellow, drive shaft |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Length | 69 mm |
| Placement on Vehicle | Wheel Side, Rear Axle Left, Rear Axle Right |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.74
Important compatibility info
| Additional Information 2 | with clamp |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 130 mm |
| Material | Rubber |
| Inner diameter 1 | 9 mm |
| Inner diameter 2 | 40 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (14083)
- 1x Febi Clamping Clip (38761)
£7.24
Important compatibility info
| Width | 63 mm |
| Thickness | 137 mm |
| Number of Connectors / Ports | 3 |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.98
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with lock nut |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M18 x 1,5 |
| Paired article numbers | 43657 |
| Cone Size | 23 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.25
Important compatibility info
| Paired article numbers | 43659 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Cone Size | 20 mm |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Triangular Control Arm (CV) |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.69
Important compatibility info
| Outer diameter | 168 mm |
| Function | Ring, wheel hub |
| Inner diameter | 105 mm |
| Thickness | 24 mm |
| Type | Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.06
Important compatibility info
| Function | Water Pump, engine cooling |
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 7 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 0683 585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£240.06
Important compatibility info
| Function | Inner Tie Rod |
| Length | 258 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.88
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 67 mm |
| Width | 35 mm |
| Width of castor bearing surface | 31 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.11
Important compatibility info
| Function | Oil Filter, retarder |
| Filter type | Filter Insert |
| Inner diameter | 20 mm |
| Outer diameter | 84 mm |
| Height | 107 mm |
| Type | Oil Filter, retarder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.41
Important compatibility info
| Function | Mounting, engine |
| Width | 250 mm |
| Placement on Vehicle | Rear, both sides |
| Internal Thread Size | M20 x 2,5 |
| Hole Spacing | 200 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 820 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Internal Thread Size | M28 x 1,5 RHT |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.32
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with screw connection |
| Voltage | 24 V |
| Number of Poles | 7 -pin connector |
| DIN / ISO | 1185 (N) |
| Type | Plug |
| Function | Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.81
Important compatibility info
| Material | Plastic |
| Outer diameter | 78 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Additional Information 2 | with screw |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 5751.E4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Tie Rod End |
| Thickness | 83 mm |
| Spanner Size | 22 |
| Paired article numbers | 43696 |
| Placement on Vehicle | Front Axle Right |
| Length | 250 mm |
| Width | 50 mm |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.61
Important compatibility info
| Function | Gasket, cylinder head cover |
| Thickness | 7 mm |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | Right |
| Length | 579 mm |
| Width | 8 mm |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| Replaces | 43701 |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.87
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Replaces | 43708 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.74
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.28
Important compatibility info
| Type | Mounting, shock absorber |
| Length | 46 mm |
| Function | Mounting, shock absorber |
| Material | Rubber/Metal |
| Outer diameter | 42 mm |
| Inner diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.73
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 43728 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| External Thread Size | M18 x 1,5, M12 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (12780)
- 1x Febi Tie Rod End (29324)
£22.36
Important compatibility info
| Outer diameter | 72 mm |
| Thickness | 30 mm |
| Inner diameter | 52 mm |
| Bearing Type | Self-aligning Ball Bearing |
| Type | Bush, steering knuckle |
| Function | Bush, steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.38
Important compatibility info
| External Thread Size | M18 x 1,5, M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 43732 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (43727)
- 1x Febi Bellow Kit, steering (43552)
£26.31
Important compatibility info
| External Thread Size | M18 x 1,5, M12 x 1,5 |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 43731 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (43728)
- 1x Febi Bellow Kit, steering (43552)
£26.31
Important compatibility info
| Shape/Form | slotted |
| Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right, Rear |
| Outer diameter | 47 mm |
| Inner diameter | 12 mm |
| Thickness | 60 mm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.77
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 69 mm. 75 mm |
| Thickness | 90 mm. 61 mm |
| Inner diameter | 12 mm |
| Function | Bush Set, axle beam |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (43743)
- 2x Febi Bolt, axle beam mounting (26142)
- 2x Febi Nut (14392)
£34.39
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Flasher Unit |
| Type | Flasher Unit |
| Hole Spacing | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.03
Important compatibility info
| Width | 23.4 mm |
| Number of Teeth | 95 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (19852)
- 1x Febi Water Pump, engine cooling (23057)
- 1x Febi Pulley Bolt (186440)
£68.77
Important compatibility info
| Function | Protection Lid, wheel hub |
| Inner diameter | 110 mm |
| Thickness | 51 mm |
| Outer diameter | 153 mm |
| Type | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.40
Important compatibility info
| Function | Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with nut, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (33512)
- 1x Febi Bellow Kit, steering (43550)
£37.71
Important compatibility info
| Length | 243 mm |
| Outer diameter | 114.5 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 003 830 05 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.24
Important compatibility info
| Length | 276 mm |
| Outer diameter | 104 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 000 830 93 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.62
Important compatibility info
| Length | 249 mm |
| Outer diameter | 130 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 000 830 86 08 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.79
Important compatibility info
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M18 x 1,5 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (43779)
- 1x Febi Bellow Kit, steering (43552)
£22.25
Important compatibility info
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Outer diameter | 76 mm |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.33
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Outer diameter | 79 mm |
| Thickness | 51 mm |
| Inner diameter | 19 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Material | Aluminium |
| Width | 71 mm |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38659)
£19.86
Important compatibility info
| Width | 35 mm |
| Outer diameter | 123 mm |
| Inner diameter | 30 mm |
| Function | Belt Pulley, alternator |
| Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.86
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 134 mm |
| Material | Metal |
| Thickness | 25.5 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.02
Important compatibility info
| Additional Information | with counter nut |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 311 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (43793)
- 1x Febi Nut (38938)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
£15.94
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 43796 |
| Function | Tie Rod |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (37436)
- 1x Febi Tie Rod End (36506)
£25.79
Important compatibility info
| for OE number | 8T0 498 203 SK1 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 83 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29247)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Circlip (29249)
- 1x Febi Screw (31324)
- 1x Febi High Temperature Lubricant (03630)
£20.15
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 85 mm |
| Thread Type | with right-hand thread |
| Cone Size | 38 mm |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M36 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.19
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | slotted/perforated, internally vented |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 22 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.90
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 240 mm |
| Thickness | 40 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.2 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.00
Important compatibility info
| Function | Brake Disc |
| Rotor Style | Solid |
| Bolt Hole Circle Diameter | 112 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7.3 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 42.7 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.70
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 280 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.50
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 298 mm |
| Thickness | 59.1 mm |
| Brake Disc Thickness | 14.2 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 101.6 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023