Important compatibility info
Inner diameter 1 | 60 mm |
Colour | Black |
Function | Charge Air Hose |
Port / Connector type | OE PUSH CONNECTOR |
Material | Polychloroprene (Neoprene) |
Type | Charge Air Hose |
Inner diameter 2 | 60 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Thread Measurement 1 | M12x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5083 |
Placement on Vehicle | Front Axle Right, outer |
Important compatibility info
Placement on Vehicle | Front Axle Left, outer |
Thread Measurement 1 | M12x1.25 |
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5352 |
Important compatibility info
Thread Measurement 2 | M16X1.5 |
Length | 307 mm |
Axle Joint Thread Type | with external thread |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 307 mm |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 2 | M16X1.5 |
Thread Measurement 1 | M16X1.5 |
Length | 210 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Axle Joint Length | 210 mm |
Type | Inner Tie Rod |
Important compatibility info
Width 1 | 108 mm |
Outer diameter 1 | 152 mm |
Bearing Code | Gen 3 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Replaces | BWK1199 |
Important compatibility info
Bearing Code | Gen 2 |
Inner diameter 1 | 25 mm |
Outer diameter 1 | 129 mm |
Width 1 | 72 mm |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Required quantity | 2 |
Length | 297 mm |
Function | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Type | Warning Contact, brake pad wear |
Important compatibility info
Water Pump Pulley Diameter | 90 mm |
Impeller Diameter | 78 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Number of Inlets / Outlets | 2 |
Voltage | 12 V |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Clutch Kit |
Number of Teeth | 20 |
Type | Clutch Kit |
Additional Information | with central slave cylinder |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with banjo fitting |
Additional Information 2 | without banjo bolt |
Thread Size | M10x1 |
Thread Type | with internal thread |
Length 1 | 551 mm |
Type | Brake Hose |
Function | Brake Hose |
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Mounting points diameter | 14 mm |
Paired article numbers | FCA7955 |
Steering arm type | Control Arm |
Material | Aluminium |
Diameter | 20 mm |
Length | 304 mm |
Important compatibility info
Number of mounting bores | 2 |
Surface | Coated |
Rotor Style | Vented |
Number of Holes | 5 |
Height | 33 mm |
Outer diameter | 314 mm |
Brake Disc Thickness | 20 mm |
Minimum thickness | 18 mm |
Centering Diameter | 76 mm |
Quantity Unit | Set |
Function | Brake Disc |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Important compatibility info
Length 1 | 1413 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Length 2 | 1200 mm |
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 21 |
External Teeth, Diff.Side | 30 |
Type | Drive Shaft |
Number of Teeth, ABS ring | 44 |
Placement on Vehicle | Front Axle Left |
Length | 646 mm |
Important compatibility info
Function | Brake Hose |
Length | 502 mm |
Type | Brake Hose |
Additional Information | with banjo fitting |
Placement on Vehicle | Rear Axle Left |
Thread Type | with internal thread |
Important compatibility info
Brake Disc Thickness | 30 mm |
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Type | Brake Disc Rotor |
Quantity | 1 |
Centering Diameter | 79 mm |
Minimum thickness | 28.5 mm |
Number of Holes | 5 |
Outer diameter | 340 mm |
Height | 73.2 mm |
Replaces | BBD6173S |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Outer diameter | 300 mm |
Function | Brake Disc |
Centering Diameter | 79 mm |
Minimum thickness | 19.9 mm |
Brake Disc Thickness | 22 mm |
Height | 80 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Quantity | 1 |
Surface | Coated |
Number of mounting bores | 5 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023