Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1 301 965 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44519 |
| Outer Length | 470 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
£63.77
Important compatibility info
| Placement on Vehicle | Rear Axle Left, inner, Outer, Rear Axle Right |
| Width | 24 mm. 30 mm |
| Outer diameter | 38.3 mm |
| Inner diameter | 12.1 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.47
Important compatibility info
| Cone Size | 26 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle |
| Length | 140 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin, with threaded sleeve, with sleeve |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (43445)
£26.26
Important compatibility info
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Function | Tie Rod End |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with sleeve, with threaded sleeve, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (39389)
£26.63
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 145 mm |
| Thread Length | 107 mm |
| External Thread Size | M20 x 1,5 |
| Cone Size | 28.9 mm |
| Internal Thread Size | M30 x 1,5 |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Additional Information | with sleeve, with crown nut and split pin, with threaded sleeve |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (34103)
£27.07
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 120 mm |
| Outer diameter | 40 mm |
| Thread Type | with right-hand thread |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Additional Information | with sleeve, with lock nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£28.75
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Thickness | 131 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.06
Important compatibility info
| Material | Plastic |
| Connector Shape | Round |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.76
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 21.5 mm |
| Thickness | 40 mm |
| Material | Rubber |
| Width | 45 mm |
| Length | 40 mm |
| Placement on Vehicle | Rear Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.67
Important compatibility info
| Outer diameter | 73.5 mm. 52.3 mm |
| Thickness | 26 mm |
| Inner diameter | 21 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.43
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44548 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39557)
- 1x Febi Ball Joint (36051)
£36.11
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.51
Important compatibility info
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 250 mm |
| Number of Connectors / Ports | 2 |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.82
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 340 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.37
Important compatibility info
| Length | 582 mm |
| Outer diameter | 40 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 404 mm |
| Mounting points diameter | 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£409.79
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 600 mm |
| Min. Length | 350 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.63
Important compatibility info
| Function | Suspension, propshaft |
| Inner diameter | 30 mm |
| Outer diameter | 55 mm |
| Thickness | 106 mm |
| Width | 36 mm |
| Hole Spacing | 160 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (192918)
- 1x Febi Bearing, propshaft centre bearing (05362)
£36.06
Important compatibility info
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 30 mm |
| Width | 36 mm |
| Outer diameter | 55 mm |
| Thickness | 106 mm |
| Additional Information 2 | with ball bearing |
| Function | Suspension, propshaft |
| Hole Spacing | 145 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.04
Important compatibility info
| Length | 92 mm |
| Width | 38 mm |
| Thickness | 75 mm |
| Voltage | 28 V |
| Function | Alternator Regulator |
| Hole Spacing | 55 mm |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.15
Important compatibility info
| Length | 75 mm |
| Width | 80 mm |
| Thickness | 46 mm |
| Voltage | 28 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Hole Spacing | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 93 mm |
| Width | 79 mm |
| Material | Rubber/Metal |
| Thread Length | 33 mm |
| Thickness | 59 mm |
| Function | Rubber Buffer, suspension |
| External Thread Size | M12 x 1,75 |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.38
Important compatibility info
| Length | 400 mm |
| Outer diameter | 80 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 268 mm |
| Mounting points diameter | 25 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£450.92
Important compatibility info
| Length | 721 mm |
| Outer diameter | 48 mm |
| Number of Connectors / Ports | 3 |
| Stroke | 526 mm |
| Mounting points diameter | 28 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£355.28
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.33
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£223.94
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.59
Important compatibility info
| Type | Suspension, propshaft |
| Inner diameter | 35 mm |
| Outer diameter | 55 mm |
| Width | 36 mm |
| Function | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Additional Information 2 | with ball bearing |
| Thickness | 107 mm |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (192918)
- 1x Febi Bearing, propshaft centre bearing (21311)
£48.56
Important compatibility info
| Placement on Vehicle | Upper Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Function | Radiator Hose |
| Hose Length | 283 mm |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.27
Important compatibility info
| Length | 555 mm |
| Width | 348 mm |
| Material | PP (Polypropylene) |
| Thickness | 159 mm |
| Function | Expansion Tank, coolant |
| Internal Thread Size | M72 x 1,5 |
| External Thread Size | M48 x 1,5 |
| Fill quantity | 8.5 l |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.01
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 60 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G44HCF |
| Extra Description | Basic Short Kit |
| Wet Boiling Point | 50 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33896)
- 1x Febi Tensioner Guide, oil pump drive chain (44606)
£40.97
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 60 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G44HCF |
| Wet Boiling Point | 50 °C |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33896)
- 1x Febi Tensioner Guide, oil pump drive chain (44609)
£28.07
Important compatibility info
| Function | Filter, cabin air |
| Length | 405 mm |
| Height | 30 mm |
| Width | 178 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.00
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44621 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38701)
- 2x Febi Screw (44617)
- 2x Febi Nut (44618)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (24361)
£77.37
Important compatibility info
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 44620 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38700)
- 2x Febi Screw (44617)
- 2x Febi Nut (44618)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (24361)
£73.04
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 46.5 mm |
| Width | 48 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Thickness | 43 mm |
| Inner diameter | 16.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.90
Important compatibility info
| Height | 144 mm |
| Outer diameter | 85 mm |
| Inner diameter | 14 mm |
| Function | Fuel filter |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.82
Important compatibility info
| Type | Repair Kit, clutch booster |
| Function | Repair Kit, clutch booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.80
Important compatibility info
| Type | Bellow, air suspension |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 197 mm |
| Thickness | 560 mm. 200 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M24 x 1,5, M16 x 1,5 |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.46
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Additional Information | with piston |
| Placement on Vehicle | Front Axle |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 433 mm. 168 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.80
Important compatibility info
| Outer diameter | 190 mm. 228 mm |
| Thickness | 610 mm. 180 mm |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M16 x 2, M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.40
Important compatibility info
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 184 mm |
| Thickness | 560 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£117.54
Important compatibility info
| Length | 785 mm |
| Outer diameter | 48 mm |
| Number of Connectors / Ports | 3 |
| Stroke | 558 mm |
| Mounting points diameter | 28 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£374.84
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm. 230 mm |
| Thickness | 388 mm. 159 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.99
Important compatibility info
| Length | 203 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.55
Important compatibility info
| Length | 47.2 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.25
Important compatibility info
| Length | 72 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.42
Important compatibility info
| Length | 47.4 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.66
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| for OE number | 944 612 212 07 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.81
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 195 mm |
| Inner diameter | 17 mm |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
| Additional Information | with bump stop |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023