Important compatibility info
Length | 649 mm |
Function | Drive Shaft |
Diameter 2 | 108 mm |
External Teeth, Wheel Side | 30 |
Type | Drive Shaft |
Important compatibility info
Length 1 | 1577 mm |
Function | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Type | Cable Pull, parking brake |
Important compatibility info
Length 2 | 752 mm |
Length 1 | 1075 mm |
Function | Cable Pull, manual transmission |
Length 3 | 1015 mm |
Length 4 | 695 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Inner diameter 2 | 42 mm |
Inner diameter 1 | 14 mm |
Function | Bellow Kit, steering |
Additional Information 2 | with clamps |
Type | Bellow Kit, steering |
Length | 168 mm |
Material | Rubber |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Length | 171 mm |
Inner diameter | 24 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Material | Aluminium |
Paired article numbers | FSK7254 |
Placement on Vehicle | Front Axle, Left, Rear |
Important compatibility info
Material | PE (Polyethylene) |
Colour | Black |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 1 | 48 mm |
Inner diameter 2 | 35 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Material | PE (Polyethylene) |
Inner diameter 2 | 34 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 1 | 34 mm |
Colour | Black |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Colour | Black |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Inner diameter 1 | 48 mm |
Type | Charge Air Hose |
Inner diameter 2 | 48 mm |
Important compatibility info
Function | Centre Rod Assembly |
Pipe Diameter | 38 mm |
Thread Measurement 2 | M24X1.5 |
Length | 435 mm |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Thread Measurement 1 | M30X1.5 |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
for steering manufacturer | ZF |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Right, outer |
Type | Tie Rod End |
Paired article numbers | FTR4836 |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5363 |
Important compatibility info
Important compatibility info
Bearing Code | Gen 1 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Inner diameter 1 | 40 mm |
Outer diameter 1 | 78 mm |
Additional Information 2 | with integrated ABS sensor |
Important compatibility info
Function | Wheel Bearing Kit |
Outer diameter 1 | 154 mm |
Bearing Code | Gen 3 |
Placement on Vehicle | Front Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Bearing Code | Gen 0 |
Inner diameter 1 | 50 mm |
Inner diameter 2 | 45 mm |
Outer diameter 1 | 82 mm |
Width 1 | 22 mm |
Outer diameter 2 | 73.5 mm |
Width 2 | 20 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Bearing Code | Gen 1 |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 39 mm |
Outer diameter 1 | 72 mm |
Only in connection with | BHN203, FHN203 |
Width 1 | 37 mm |
Tightening Torque | 290 Nm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length | 495 mm |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Rear Axle |
Important compatibility info
Water Pump Pulley Diameter | 64 mm |
Impeller Diameter | 64 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 619 mm |
External Teeth, Wheel Side | 26 |
External Teeth, Diff.Side | 33 |
Type | Drive Shaft |
Function | Drive Shaft |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023