Important compatibility info
Weight | 0.042 kg |
Type | Gasket, washer fluid pump/washer fluid reservoir |
Function | Gasket, washer fluid pump/washer fluid reservoir |
for OE number | 7M0 919 382 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 037 906 283 C |
Operating Mode | Electric-pneumatic |
Weight | 0.072 kg |
Number of Connectors / Ports | 2 |
Valve type | Switch Valve |
Type | Valve, air control (intake air) |
Function | Valve, air control (intake air) |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Type | Sensor, exterior temperature |
Function | Sensor, exterior temperature |
Weight | 0.003 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | High Pressure Pump |
Type | High Pressure Pump |
Weight | 0.794 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 26.4 mm. 40 mm |
Function | Frost Plug |
Weight | 0.012 kg |
Extra Description | febi Plus |
Type | Frost Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 2.5 mm |
Inner diameter | 15 mm |
Weight | 0.100 kg |
Placement on Vehicle | Rear Axle |
Function | Mounting Kit, stabiliser bar |
Type | Mounting Kit, stabiliser bar |
Additional Information 2 | with bolts/screws |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (23356)
- 2x Febi Bracket, stabiliser mounting (23604)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Type | Breather Valve, fuel tank |
Function | Breather Valve, fuel tank |
Extra Description | febi Plus |
Weight | 0.067 kg |
for OE number | 06E 906 517 A |
Valve type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | for control arm |
Weight | 0.7 kg |
Function | Ball Joint |
Paired article numbers | 40536 |
Placement on Vehicle | Front Axle Right, Lower |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Ball Joint |
Thickness | 1 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (40277)
- 1x Febi Securing Plate, ball joint (40283)
- 3x Febi Nut, ball joint (36734)
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Function | Sealing Cap, oil filler neck |
Colour | Black |
Weight | 0.05 kg |
Type | Sealing Cap, oil filler neck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32957 |
Weight | 1.02 kg |
Placement on Vehicle | Rear Axle Left, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Placement on Vehicle | Rear Axle |
Inner diameter | 15 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle, Rear Axle |
Height | 151 mm |
Outer diameter | 27 mm. 75 mm. 92 mm. 100 mm. 108 mm. 116 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Weight | 0.23 kg |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 64 |
Timing Chain Size | G53HP, G53HR |
Function | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Weight | 0.176 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Material | Aluminium |
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Heat Exchanger, interior heating |
Additional Information | with gasket/seal |
Weight | 0.575 kg |
Type | Heat Exchanger, interior heating |
Core Length | 185 mm |
Core Width | 175 mm |
Core Depth | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Weight | 0.008 kg |
Thickness | 73 mm |
Function | Fastening Clamp, charge air hose |
Type | Fastening Clamp, charge air hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Colour | Black |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Additional Information 2 | with bolts/screws |
Weight | 0.330 kg |
Type | Valve, crankcase ventilation |
Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (47725)
- 1x Febi Gasket, crankcase ventilation (44481)
- 1x Febi Hose, cylinder head cover ventilation (100463)
- 1x Febi Hose, cylinder head cover ventilation (100659)
- 4x Febi Screw (107188)
Important compatibility info
Function | Housing, oil filter |
Extra Description | febi Plus |
Type | Housing, oil filter |
Additional Information | with gasket/seal, with oil filter |
Weight | 1.150 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | frontal sided |
Material | Metal |
Type | Housing Cover, crankcase |
Sealing lip material | PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) |
Function | Housing Cover, crankcase |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 245 mm |
Material | PTFE (polytetrafluoroethylene) |
Thickness | 34.5 mm |
Function | Shaft Seal, automatic transmission |
Weight | 0.2 kg |
Inner diameter | 48 mm |
Type | Shaft Seal, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.235 kg |
Material | Metal |
Thickness | 1 mm |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Low Pressure Side |
for OE number | 06E 906 051 K |
External Thread Size | M10 x 1 |
Number of Connectors / Ports | 3 |
Function | Sensor, fuel pressure |
Weight | 0.020 kg |
Type | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Placement on Vehicle | Rear Axle Left, Lower, Front, Rear Axle Right |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 1.1 kW |
Weight | 4.0 kg |
for OE number | 02M 911 023 G |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Thickness | 65 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Inner diameter | 85 mm |
Thickness | 15.7 mm |
Outer diameter | 131 mm. 152 mm |
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | transmission sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Guide, timing chain |
Weight | 0.006 kg |
Placement on Vehicle | Upper |
Material | Plastic |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Colour Coding | Grey |
Additional Information | with retaining spring, with gasket/seal |
Function | Sensor, coolant temperature |
Screw length below head | 20 mm |
Weight | 0.015 kg |
Type | Sensor, coolant temperature |
Replaces | 33911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.020 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 32956 |
Placement on Vehicle | Rear Axle Right, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamps |
Weight | 0.08 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 190 mm |
Function | Bellow Kit, steering |
Material | Thermoplast |
Type | Bellow Kit, steering |
Inner diameter 1 | 16 mm |
Inner diameter 2 | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (31054)
- 1x Febi Clamping Clip (38762)
- 1x Febi Clamping Clip (38756)
Important compatibility info
Weight | 0.5 kg |
Number of Connectors / Ports | 2 |
Function | High Pressure Pump |
Operating Mode | Mechanical |
Type | High Pressure Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Weight | 0.160 kg |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 32 mm |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Weight | 0.28 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, exhaust manifold |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.008 kg |
Function | Gasket, oil cooler |
Type | Gasket, oil cooler |
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Length | 1055 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.130 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 23808 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.88 kg |
Width | 102 mm |
Function | Stub Axle, axle beam |
Height | 87 mm |
Type | Stub Axle, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.062 kg |
Colour | Green |
Number of Connectors / Ports | 3 |
Cable Length | 465 mm |
Type | Knock Sensor |
Function | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.321 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 42 |
Function | Timing Chain Kit |
Extra Description | Basic Short Kit |
Timing Chain Size | G67AM, G67HP, G67HR |
Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25227)
- 1x Febi Tensioner, timing chain (32518)
Important compatibility info
Material | Metal, Plastic |
Outer diameter | 111 mm |
Thickness | 27 mm |
Inner diameter | 68 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Weight | 0.26 kg |
Type | Rolling Bearing, suspension strut support mount |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.14 kg |
Material | Rubber |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 185 mm |
Inner diameter 1 | 30 mm. 37 mm. 42 mm. 50 mm. 55 mm |
Inner diameter 2 | 11 mm. 22 mm. 30 mm. 42 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.41 kg |
External Teeth, Wheel Side | 36 |
Internal Teeth, wheel side | 27 |
Outer diameter 1 | 98 mm |
Outer diameter 2 | 59.6 mm |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33257)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Axle Bolt, drive shaft (22462)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38765)
Important compatibility info
Outer diameter | 58 mm |
Function | Hydraulic Filter, automatic transmission |
Weight | 0.08 kg |
Type | Hydraulic Filter, automatic transmission |
Filter type | Filter Insert |
Height | 105 mm |
Inner diameter | 17 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 27 mm |
Outer diameter | 23 mm |
External Thread Size | M14 x 1,5 |
Weight | 0.062 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 48 mm |
Material | Steel |
Spanner Size | 17 |
Colour | Silver |
Surface | Zinc-coated |
Thread Length | 27 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 8.8 |
Wheel Fastening | Ball seat A/G |
Function | Wheel Bolt |
Type | Wheel Bolt |
Rims | for light alloy rims, for steel rims |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.179 kg |
Length | 100 mm |
Material | Thermoplast |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 67 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38348)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45640)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Function | Air Filter |
Length | 408 mm |
Height | 39 mm |
Width | 173 mm |
Weight | 0.325 kg |
Filter type | Filter Insert |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.042 kg |
External Thread Size | M10 x 1 |
for OE number | 06J 906 051 C |
Additional Information 2 | High Pressure Side |
Number of Connectors / Ports | 3 |
Type | Sensor, fuel pressure |
Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Length | 97 mm |
Material | Plastic |
Number of Connectors / Ports | 4 |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Screw length below head | 22 mm |
Function | Screw Plug, oil sump |
Bolt Head/Nut Design | Male Hex |
Surface | Zinc-coated |
Spanner Size | 19 |
Material | Steel |
Length | 30 mm |
Thread Length | 17.5 mm |
Type | Screw Plug, oil sump |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023