Important compatibility info
Placement on Vehicle | Front Axle Left |
External Teeth, Diff.Side | 26 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Min. Length | 641 mm |
Weight | 5.230 kg |
External Teeth, Wheel Side | 23 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 74.2 mm |
Wheel Sided Joint Diameter | 79.0 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.124 kg |
Length | 150 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 95 mm |
Type | Bellow, drive shaft |
Function | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.204 kg |
for OE number | 601 050 08 16 |
Function | Guide, timing chain |
Engine Management | Timing Chain |
Type | Guide, timing chain |
Placement on Vehicle | Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.41 kg |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.5 mm. 18 mm |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | incl. wear warning contact |
Width | 75 mm. 73.2 mm |
Length | 156.2 mm. 155.2 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.750 kg |
Placement on Vehicle | Front Axle |
Length | 151 mm |
Width | 57 mm. 60.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Model | CR-V |
Manufacturer | HONDA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 247 240 54 00 |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 2.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 58 mm |
Weight | 4.91 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 106 mm |
Material | Thermoplast |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 64 mm |
Joint Type | Tripod Joint |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Weight | 0.084 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175237)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | EGR Valve |
Function | EGR Valve |
for OE number | 51.08150.0029 |
Weight | 0.146 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.157 kg |
Placement on Vehicle | Front Axle Left, Upper, Front, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 39 mm |
Thickness | 60 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner Pulley, timing belt |
Weight | 0.630 kg |
Type | Tensioner Pulley, timing belt |
Outer diameter | 78 mm |
Width | 87 mm |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.28 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 02285 |
Thread Type | with left-hand thread |
Cone Size | 14 mm |
External Thread Size | M12 x 1,5, M14 x 1,5 |
Function | Tie Rod End |
Length | 90 mm |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 197 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
External Thread Size | M12 x 1,5 |
Weight | 0.430 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5, M17 x 1,5 |
Additional Information | with counter nut |
Weight | 0.70 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 294 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Weight | 0.472 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Length | 214 mm |
Additional Information | with counter nut |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Thickness | 89 mm. 57.5 mm |
Inner diameter | 12.4 mm |
Function | Bushing, axle beam |
Outer diameter | 80 mm. 69.5 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.910 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Rear |
Length | 105 mm |
Width | 49 mm |
Material | Aluminium |
Outer diameter | 80 mm. 64 mm |
Thickness | 60 mm |
Inner diameter | 22 mm. 17 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Placement on Vehicle | Lower Front Axle, Left, Rear |
Steering arm type | Control Arm |
Paired article numbers | 27012 |
Material | Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Filter |
Function | Oil Filter |
Gasket outer diameter | 111 mm |
Outer diameter | 95 mm |
Height | 115 mm |
Gasket inner diameter | 104.2 mm |
Additional Information 2 | with seal ring |
Inner diameter | 34 mm |
Filter type | Filter Insert |
Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, both sides |
Capacity | 0.4 l |
Weight | 1.65 kg |
Function | Pressure Accumulator, pneumatic suspension |
Type | Pressure Accumulator, pneumatic suspension |
Pressure | 30 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023