Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Pipe Diameter | 62 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Pull Rod |
Inner diameter | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 19.860 kg |
Outer diameter | 58 mm |
Length | 1815 mm |
Placement on Vehicle | Front Axle Right |
Hole Spacing | 62 mm |
Mounting points diameter | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Placement on Vehicle | Rear Axle |
Function | Gasket Set, differential |
Type | Gasket Set, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, differential (29782)
- 1x Febi Shaft Seal, differential (29783)
Important compatibility info
Weight | 7.526 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 687 mm |
Wheel Sided Joint Diameter | 88.9 mm |
Transmission-side joint diameter | 85.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Thread Size | M24x1,5 |
Additional Information 2 | with nut |
Additional Information | with Split Pin |
Placement on Vehicle | Front Axle Left |
External Teeth, Wheel Side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.038 kg |
Placement on Vehicle | Rear Axle Left |
Length | 530 mm |
Paired article numbers | 104219 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 147 mm |
Outer diameter | 107 mm |
Filter type | Spin-on Filter |
Weight | 0.717 kg |
Type | Oil Filter |
Function | Oil Filter |
Gasket outer diameter | 71.7 mm |
Gasket inner diameter | 62.3 mm |
Internal Thread Size | 3/4" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.83 kg |
Placement on Vehicle | Rear Axle Left |
Material | Rubber/Metal |
Paired article numbers | 109347 |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 250 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, exhaust gas temperature |
Weight | 0.053 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | Exhaust Turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 20 mm |
Material | FPM (fluoride rubber) |
Outer diameter | 172 mm |
Thickness | 12 mm |
Inner diameter | 132 mm |
Number of Teeth | 100 |
Function | Shaft Seal, wheel hub |
Weight | 0.365 kg |
Type | Shaft Seal, wheel hub |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Rear Axle |
Length | 240 mm |
Weight | 3.200 kg |
Rod/Strut | Coupling Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Diameter | 36 mm |
Material | Steel |
Thickness | 179 mm |
Additional Information 2 | with crown nut |
Spanner Size | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 42 |
Internal Teeth, wheel side | 33 |
Weight | 2.122 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.74 kg |
Type | Brake Valve, service brake |
Function | Brake Valve, service brake |
Internal Thread Size | M16 x 1,5, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M10x1,5 |
Paired article numbers | 182444 |
External Teeth, Wheel Side | 36 |
Weight | 8.441 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 918 mm |
Wheel Sided Joint Diameter | 88 mm |
Transmission-side joint diameter | 84 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Weight | 0.160 kg |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.298 kg |
Material | PA (polyamide) |
Type | Coolant Pipe |
Function | Coolant Pipe |
Additional Information | with gaskets/seals |
Cooling Hose | from connecting pipe to thermostat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.015 kg |
Type | Oil Pump |
Function | Oil Pump |
Additional Information | with electrical oil pressure valve |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 9 |
Length | 1424 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt |
Weight | 0.218 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19 mm |
Type | Ball Joint |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Steering arm type | for control arm |
Weight | 0.788 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Length | 266 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Steel |
Outer diameter | 8 mm |
Rod/Strut | Coupling Rod |
Surface | Painted |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M10 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Length | 827 mm |
Outer diameter | 206 mm |
Number of Connectors / Ports | 4 |
Function | Air Tank, compressed-air system |
Weight | 9.9 kg |
Capacity | 25 l |
Operating Pressure | 15.5 bar |
Type | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178073 |
Weight | 1.45 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023