Important compatibility info
| Length | 165 mm |
| Inner diameter 2 | 38 mm |
| Inner diameter 1 | 10 mm |
| Function | Bellow Kit, steering |
| Type | Bellow Kit, steering |
| Material | Rubber |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Important compatibility info
| Length | 218 mm |
| Function | Bellow Kit, steering |
| Material | Thermoplast |
| Inner diameter 2 | 46 mm |
| Inner diameter 1 | 12 mm |
| Type | Bellow Kit, steering |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
Important compatibility info
| Function | Repair Kit, stabiliser coupling rod |
| Type | Repair Kit, stabiliser coupling rod |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Length | 52 mm |
| Inner diameter | 18 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7278 |
| Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Inner diameter | 17 mm |
| Height | 28 mm |
| Type | Suspension Strut Support Mount |
| Outer diameter | 92 mm |
| Paired article numbers | FSM5122 |
Important compatibility info
| Colour | Black |
| Inner diameter 2 | 54 mm |
| Inner diameter 1 | 59 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Material | PE (Polyethylene) |
| Placement on Vehicle | Left, Lower, Front |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1109S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2005S)
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with external thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Thread Measurement 2 | M20X1.5 F |
| Length | 150 mm |
| Thread Measurement 1 | M18X1.5 M |
| Function | Inner Tie Rod |
| Axle Joint Length | 150 mm |
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Thread Measurement 2 | M14X2.0 |
| Length | 197 mm |
| Thread Measurement 1 | M16X1.5 |
| for steering manufacturer | SMI |
| Function | Inner Tie Rod |
| Axle Joint Length | 197 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Housing Type | without housing |
| Replaces | BWP1516 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Impeller Diameter | 60 mm |
| Water Pump Pulley Diameter | 52 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Replaces | BWP2264 |
Important compatibility info
| Function | Air Filter |
| Frame Material | Plastic |
| Width | 146 mm |
| Height | 56 mm |
| Length | 248 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Function | Coolant Flange |
| Type | Coolant Flange |
Important compatibility info
| Seal Diameter | 63 mm |
| Thread Size | M20X1.5 |
| Outer diameter | 69 mm |
| Height | 86 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Type | Oil Filter |
Important compatibility info
| Function | Air Filter |
| Frame Material | Plastic |
| Length | 197 mm |
| Type | Air Filter |
| Height | 52 mm |
| Width | 148 mm |
| Filter type | Filter Insert |
Important compatibility info
| Axle Joint Length | 304 mm |
| Length | 304 mm |
| Thread Measurement 1 | M16x1.5 |
| Thread Measurement 2 | M16x1.5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without bearing |
| Inner diameter | 12 mm |
| Paired article numbers | FSM5574 |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Inner diameter | 19.05 mm |
| Material | Plastic |
| Additional Information 2 | without sensor |
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Length | 135 mm |
| Inner diameter | 12 mm |
Important compatibility info
| Diameter | 19.1 mm |
| Material | Aluminium |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















