Important compatibility info
| Axle Joint Thread Type | with right-hand thread, with external thread |
| Thread Measurement 2 | M14X1.5 |
| Length | 363 mm |
| Thread Measurement 1 | M16X1.5 |
| for steering manufacturer | ZF |
| Function | Inner Tie Rod |
| Axle Joint Length | 363 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Thread Measurement 1 | M12x1.25 |
| Thread Type | with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5303 |
Important compatibility info
| Thread Size | M12x1.5 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing Kit |
| Width 1 | 36 mm |
| Outer diameter 1 | 77 mm |
| Inner diameter 1 | 42 mm |
| Type | Wheel Bearing Kit |
| Bearing Code | Gen 1 |
Important compatibility info
| Type | Gasket, water pump |
| Function | Gasket, water pump |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Number of Wings | 6 |
| Height | 70 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Holes | 5 |
| Impeller Diameter | 55 mm |
| Water Pump Pulley Diameter | 68 mm |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 25.4 x 22.7 |
| Outer diameter | 230 mm |
| Function | Clutch Kit |
| Number of Teeth | 24 |
| Type | Clutch Kit |
Important compatibility info
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Hub Profile | 22 x 20.2 |
| Type | Clutch Kit |
| Number of Teeth | 26 |
Important compatibility info
| Placement on Vehicle | Right Front |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Outer diameter | 14 mm |
| Type | Mounting, engine |
| Length | 136 mm |
| Inner diameter | 11 mm |
Important compatibility info
| Distance of fastening bolts | 123 mm |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5535 |
| Inner diameter | 11 mm |
| Additional Information 2 | without bearing |
| Function | Suspension Strut Support Mount |
| Height | 49 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 4 | 1112 mm |
| Type | Cable Pull, manual transmission |
| Length 1 | 798 mm |
| Length 2 | 778 mm |
| Length 3 | 1139 mm |
Important compatibility info
| Length | 317 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7627 |
| Thread Size | M10x1.5 |
| Thread Measurement 2 | M10x1.5 |
| Placement on Vehicle | Front Axle Right |
| Material | Metal, Plastic |
Important compatibility info
| Thread Measurement 2 | M16x1.5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Thread Measurement 1 | M16x1.5 |
| Axle Joint Length | 310 mm |
| Type | Inner Tie Rod |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7861 |
| Steering arm type | Control Arm |
| Material | Steel |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| External Teeth, Wheel Side | 31 |
| Type | Drive Shaft |
| Length | 1092 mm |
| Placement on Vehicle | Front Axle Right |
| Replaces | BDS1325 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1186)
Important compatibility info
| Additional Information 2 | with bearing |
| Height | 41 mm |
| Inner diameter | 12 mm |
| Paired article numbers | FSM5584 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5584)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 737 mm |
| Internal Teeth, wheel side | 27 |
| External Teeth, Diff.Side | 31 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1106 mm |
| Internal Teeth, wheel side | 27 |
| External Teeth, Diff.Side | 31 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 220 mm |
| Thread Size | M12x1.25 |
| Paired article numbers | BTR6305 |
| Type | Tie Rod End |
| Function | Tie Rod End |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















