Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90 |
| Timing Chain Size | G68HING |
| Function | Timing Chain Kit |
| Placement on Vehicle | Lower |
| Weight | 1.170 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182266)
- 1x Febi Tensioner, timing chain (182807)
- 1x Febi Guide, timing chain (183264)
- 1x Febi Guide, timing chain (182917)
- 1x Febi Guide, timing chain (183998)
£100.28
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.05 kg |
| Housing Type | without housing |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.22
Important compatibility info
| Material | Steel |
| External Thread Size | M10 x 1,25 |
| Spanner Size | 17, 12 |
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 85 mm |
| Colour | Black |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.86
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 332 mm |
| Paired article numbers | 44286 |
| Function | Tie Rod |
| Weight | 1.26 kg |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Tie Rod End (44281)
£30.03
Important compatibility info
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Outer diameter | 52 mm |
| Material | Plastic |
| Weight | 0.29 kg |
| Thickness | 52 mm |
| Inner diameter | 18.7 mm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.37
Important compatibility info
| Type | Suspension, propshaft |
| Inner diameter | 35 mm |
| Outer diameter | 55 mm |
| Width | 36 mm |
| Weight | 0.34 kg |
| Function | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Additional Information 2 | with ball bearing |
| Thickness | 107 mm |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (192918)
- 1x Febi Bearing, propshaft centre bearing (21311)
£48.48
Important compatibility info
| Weight | 0.267 kg |
| Cable Length | 590 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | after catalytic converter |
| Number of Connectors / Ports | 4 |
| for OE number | 1705 572 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£171.60
Important compatibility info
| Placement on Vehicle | Front, Right |
| Length | 267 mm |
| Paired article numbers | 179010 |
| Filter type | Filter Insert |
| Type | Air Filter |
| Weight | 0.234 kg |
| Additional Information 2 | with pre-filter |
| Height | 39 mm |
| Width | 216 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.39
Important compatibility info
| Piston conrod diameter | 8 mm |
| Eject Force | 495 N |
| Stroke | 140 mm |
| Mounting points diameter | 16.5 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 209.5 mm |
| Housing Diameter | 18 mm |
| Weight | 0.195 kg |
| Length | 372 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.60
Important compatibility info
| Function | Holder, exhaust pipe |
| Extra Description | febi Plus |
| Weight | 0.308 kg |
| Type | Holder, exhaust pipe |
| Material | Rubber/Metal |
| Placement on Vehicle | Catalytic Converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.35
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Cable Length | 575 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.97
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | Rear Axle |
| Length | 46 mm |
| Width | 50 mm |
| Thickness | 53 mm |
| Inner diameter | 30 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.22
Important compatibility info
| Outer diameter | 46 mm |
| Opening Temperature | 91 °C |
| Function | Thermostat, coolant |
| Weight | 0.09 kg |
| Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Weight | 0.035 kg |
| Spanner Size | 24 |
| Colour | Blue |
| Function | Oil Pressure Switch |
| Switch point to | 0.35 bar |
| Switch point from | 0.15 bar |
| External Thread Size | M12 x 1,5 |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.11
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Weight | 0.225 kg |
| Material | Plastic |
| Outer diameter | 81 mm |
| Number of Ribs | 6 |
| Outer diameter 2 | 76 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 17 mm |
| Mounting points diameter | 17 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm. 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 399 mm |
| Max. Length | 399 mm |
| Min. Length | 268 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.69
Important compatibility info
| Weight | 0.1 kg |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.48
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Aluminium |
| Weight | 0.720 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 141 mm |
| Core Width | 71 mm |
| Core Depth | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.40
Important compatibility info
| Operating Mode | Pneumatic |
| Weight | 0.12 kg |
| Function | Pressure Converter, exhaust control |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.90
Important compatibility info
| Weight | 1.04 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 314 mm |
| Paired article numbers | 49081 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (36509)
- 1x Febi Bellow, steering (38621)
- 1x Febi Clamping Clip (23842)
- 1x Febi Clamping Clip (38762)
£26.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023