Important compatibility info
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Type | Camshaft Adjuster |
Weight | 0.610 kg |
Placement on Vehicle | Intake Side |
Number of Teeth | 36 |
Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Rated Power | 600 W |
Number of Wings | 7 |
Function | Fan, engine cooling |
Weight | 5.34 kg |
Extra Description | febi Plus |
Type | Fan, engine cooling |
Additional Information 2 | Brushless Motor, with radiator fan shroud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Weight | 0.68 kg |
for OE number | 81.27203.6019 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 558 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 545 mm |
Type | Tilt Cylinder, driver cab |
Outer diameter | 58 mm |
Function | Tilt Cylinder, driver cab |
Placement on Vehicle | Left |
Stroke | 397 mm |
Weight | 5.7 kg |
Mounting points diameter | 20 mm. 25 mm |
Extra Description | febi Plus |
Suction side external thread size | M12 x 1,5 |
Number of Connectors / Ports | 3 |
Paired article numbers | 180403 |
Pressure side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Outer diameter | 45.3 mm |
Thickness | 13 mm |
Inner diameter | 12.2 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 0.621 kg |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Capacity | 30 l |
Operating Pressure | 13 bar |
Outer diameter | 250 mm |
Number of Connectors / Ports | 7 |
Weight | 10.6 kg |
Type | Air Tank, compressed-air system |
Function | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Material | Steel |
Length | 705 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.1 kg |
Placement on Vehicle | Front Axle |
Length | 141.8 mm |
Width | 51.2 mm. 50.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Additional Information 2 | with ball bearing |
Placement on Vehicle | Centre |
Width | 13 mm |
Outer diameter | 55 mm |
Inner diameter | 30 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 178083 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Left |
Weight | 1.66 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.059 kg |
Placement on Vehicle | Rear Axle Right |
Function | Brake Caliper |
Type | Brake Caliper |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179176 |
Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Lower |
Weight | 0.957 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Material | Rubber |
Outer diameter | 125 mm |
Thickness | 37 mm |
Inner diameter | 90 mm |
Placement on Vehicle | Front Axle, Upper |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.086 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 181029 |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.59 kg |
Pressure | 8.5 bar |
Type | Brake Valve, trailer |
Function | Brake Valve, trailer |
Internal Thread Size | M22 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cork |
Function | Gasket, cylinder head cover |
Weight | 0.079 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.067 kg |
Placement on Vehicle | Front Axle |
Material | PU (Polyurethane) |
Thickness | 70 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5, M12 x 1,5 |
Additional Information | with lock nut |
Function | Angled Ball Joint, steering drag link |
Thread Type | with right-hand thread |
Paired article numbers | 10111 |
Weight | 0.312 kg |
Type | Angled Ball Joint, steering drag link |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.450 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with right-hand thread |
Function | Tie Rod End |
External Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.042 kg |
External Thread Size | M10 x 1 |
for OE number | 06J 906 051 C |
Additional Information 2 | High Pressure Side |
Number of Connectors / Ports | 3 |
Type | Sensor, fuel pressure |
Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.390 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.343 kg |
Type | Fixing Strap, compressed-air tank |
Function | Fixing Strap, compressed-air tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Weight | 0.102 kg |
Placement on Vehicle | Rear Axle Left, outer |
Length | 195 mm |
Spanner Size | 11 |
Thread Length | 12 mm |
Type | Brake Hose |
Function | Brake Hose |
Paired article numbers | 173102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.744 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Function | Mount, exhaust system |
Type | Mount, exhaust system |
Weight | 0.034 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.112 kg |
Cable Length | 650 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting Kit, shock absorber |
Type | Mounting Kit, shock absorber |
Weight | 0.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Weight | 2.530 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.125 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Thickness | 95 mm |
Inner diameter | 17 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 156.4 mm |
Width | 55.4 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.1 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 1.513 kg |
Additional Information 2 | with piston clip |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Weight | 0.940 kg |
Placement on Vehicle | Front Axle |
Length | 110.1 mm |
Width | 46.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.105 kg |
Placement on Vehicle | Front Axle |
Length | 146.5 mm |
Width | 59.5 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Opening Temperature | 87 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Material | Metal |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 104 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 85 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
External Thread Size | M12 x 1,5 |
Material | Steel |
Type | Control/Trailing Arm, wheel suspension |
Cone Size 1 | 17.4 mm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Weight | 3.5 kg |
Paired article numbers | 188189 |
Additional Information 2 | with ball joint |
Cone Size | 21.4 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Placement on Vehicle | Front Axle |
Additional Information 2 | with crown nut |
Length | 1047 mm |
Cone Size 2 | 30 mm |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
Adjustable | Adjustable on one side |
Pipe Diameter | 52 mm |
Extra Description | ProKit |
Weight | 10.75 kg |
Cone Size | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
for OE number | 271 050 05 78 |
Type | Control Valve, camshaft adjustment |
Weight | 0.106 kg |
Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.515 kg |
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 175591 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.131 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 96 mm |
Outer diameter | 40 mm |
Thickness | 29 mm |
Inner diameter | 18 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Outer diameter 1 | 68 mm |
Function | Wheel Bearing Kit |
Outer diameter | 85 mm |
Width | 47 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 3.094 kg |
Inner diameter | 32 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Outer diameter 2 | 136 mm |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Weight | 3.12 kg |
Width | 48 mm |
Outer diameter | 85 mm |
Inner diameter | 27.5 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 112 mm |
Number of mounting bores | 4 |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Rolling Bearing |
Outer diameter 2 | 136 mm |
Outer diameter 1 | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Placement on Vehicle | Front Axle |
Length | 220 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 67 mm |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 320 mm |
Paired article numbers | 32039 |
Function | Inner Tie Rod |
Weight | 0.67 kg |
External Thread Size | M14 x 1,5, M16 x 1 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.600 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 22847 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | with acoustic wear warning |
Length | 148.5 mm |
Width | 60.6 mm |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Weight | 1.718 kg |
Thickness/Strength 1 | 16.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.22 kg |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 184 mm |
Material | Rubber |
Inner diameter 1 | 19 mm |
Inner diameter 2 | 70 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Weight | 6.11 kg |
Rim Hole Number | 6 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 302 mm |
Thickness | 48 mm |
Brake Disc Thickness | 20 mm |
Minimum thickness | 19 mm |
Bolt Hole Circle Diameter | 139.7 mm |
Centering Diameter | 100 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Additional Information 2 | with spacer plate |
Weight | 3.076 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 24 mm |
Outer diameter | 18 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023