Important compatibility info
Hub Profile | 20 x 17 |
Number of Teeth | 17 |
Outer diameter | 210 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 2 -part |
Important compatibility info
Number of Teeth | 18 |
Number of Parts | 3 -part |
Hub Profile | 20.8 x 18.3 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Wear Warning Contact | incl. wear warning contact |
Warning Contact Length | 312 mm |
Function | Brake Pad Set, disc brake |
Number of threaded bolts | 4 |
Number of pads | 4 |
Thickness/Strength 1 | 16.6 mm |
Brake System | Bosch |
Type | Brake Pad Set, disc brake |
Height 1 | 66.3 mm |
Width 1 | 171.8 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Opening Temperature | 80 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Grey Cast Iron |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5648 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6319)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6141)
Important compatibility info
Placement on Vehicle | Right Rear |
Length 1 | 1835 mm |
Length 2 | 955 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6839 |
Important compatibility info
Paired article numbers | FCA7368 |
Placement on Vehicle | Front Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 88 mm |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 22 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Additional Information 2 | with clamps |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Important compatibility info
Additional Information 2 | with clamps |
Function | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Length | 91 mm |
Inner diameter 2 | 66 mm |
Inner diameter 1 | 22 mm |
Type | Bellow Kit, drive shaft |
Important compatibility info
Function | Bellow Kit, drive shaft |
Material | Thermoplast |
Length | 95 mm |
Inner diameter 2 | 80 mm |
Inner diameter 1 | 23 mm |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Type | Bellow Kit, drive shaft |
Important compatibility info
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Length | 90 mm |
Inner diameter 2 | 73 mm |
Inner diameter 1 | 21 mm |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Function | Tie Rod |
Length | 360 mm |
Type | Tie Rod |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 241 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6661 |
Important compatibility info
Thread Measurement 2 | M10X1.25 |
Thread Size | M10X1.25 |
Length | 80 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6932 |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Size | M10x1.5 |
Length | 270 mm |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Material | Metal, Plastic |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear, transmission sided |
Important compatibility info
Material | Cast Iron |
Diameter | 20.6 mm |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Important compatibility info
Hub Profile | 32 x 26 |
Function | Clutch Kit |
Number of Teeth | 10 |
Type | Clutch Kit |
Number of Parts | 3 -part |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023