Important compatibility info
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Max. Length | 379 mm |
| Min. Length | 282 mm |
| Pipe Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals, with fastening/mounting material |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Material | Plastic |
| for OE number | 64 11 8 381 989 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51.08150.6148 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| for OE number | 1 748 892 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pitch circle diameter, clutch pressure plate | 410 mm |
| Hub fastening hole diameter | 16 mm |
| Hub internal diameter | 52 mm |
| Number of clutch pressure plate fastening holes | 12 |
| External diameter, clutch pressure plate | 395 mm |
| Number of EDC bores/notches | 58 |
| Number of hub fastening holes | 8 |
| Pitch circle diameter, hub | 84 mm |
| Function | Flywheel |
| Type | Flywheel |
| Number of Teeth | 146 |
| Additional Information | with starter motor sprocket |
| Running surface internal diameter | 236 mm |
| Hub external diameter | 115 mm |
| for OE number | 936 030 51 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Booster |
| Type | Clutch Booster |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 276 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.7 mm |
| Stroke | 190 mm |
| Eject Force | 400 N |
| Housing Diameter | 18 mm |
| Length | 492 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 245.5 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 174 mm |
| Eject Force | 345 N |
| Housing Diameter | 19 mm |
| Length | 447 mm |
| Placement on Vehicle | both sides |
| Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 120 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Housing Diameter | 18 mm |
| Eject Force | 530 N |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Additional Information | Change interval/date according to gas spring imprint |
| Housing length | 281 mm |
| Length | 475 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 153 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 85 mm |
| Eject Force | 500 N |
| Housing Diameter | 20 mm |
| Length | 270 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
| Inner diameter | 86 mm |
| Outer diameter | 123 mm |
| Height | 21.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Min. Length | 434 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Max. Length | 692 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 197 mm. 258 mm |
| Thickness | 213 mm. 600 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M6 x 1 |
| Function | Door Lock |
| Type | Door Lock |
| Paired article numbers | 177319 |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 170.5 mm |
| Function | Gas Spring, bonnet |
| Eject Force | 530 N |
| Housing Diameter | 18 mm |
| Additional Information | Change interval/date according to gas spring imprint |
| Length | 282 mm |
| Placement on Vehicle | both sides |
| Stroke | 78 mm |
| Type | Gas Spring, bonnet |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 203 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 130 mm |
| Eject Force | 295 N |
| Housing Diameter | 18 mm |
| Additional Information | Change interval/date according to gas spring imprint |
| Length | 364 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 283 mm |
| Additional Information | Change interval/date according to gas spring imprint |
| Function | Gas Spring, bonnet |
| Housing length | 161.5 mm |
| Housing Diameter | 18 mm |
| Eject Force | 395 N |
| Stroke | 90 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 451 mm |
| Housing Diameter | 22 mm |
| Eject Force | 480 N |
| Stroke | 162 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 245 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Housing length | 306 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Length | 556 mm |
| Eject Force | 575 N |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Stroke | 179 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















