Important compatibility info
Weight | 2.767 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 05921 |
Placement on Vehicle | Lower Front Axle, Right |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 107 mm |
Material | Thermoplast |
Inner diameter 1 | 32 mm |
Inner diameter 2 | 82 mm |
Function | Bellow, drive shaft |
Weight | 0.06 kg |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.550 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 300 mm |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating pressure to | 8 bar |
for OE number | 49110-3X01A |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
Weight | 1.906 kg |
Rotation Direction | Clockwise rotation |
Operating Mode | Hydraulic |
Outer diameter | 17 mm |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (2 pistons) |
Paired article numbers | 194056 |
Weight | 3.800 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 44.40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 38 mm |
Function | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181544 |
Weight | 1.41 kg |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 65 mm |
Thickness | 8 mm |
Inner diameter | 50 mm |
Function | Shaft Seal, wheel bearing |
Weight | 0.025 kg |
Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 19.09 mm |
Function | Bush, starter shaft |
Weight | 0.01 kg |
Width | 13 mm |
Outer diameter | 23.1 mm |
Placement on Vehicle | Centre |
Type | Bush, starter shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 258 mm |
Thickness | 40.4 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10.2 mm |
Bolt Hole Circle Diameter | 98 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Weight | 4.24 kg |
Rotor Style | Solid |
Rim Hole Number | 4 -Hole |
Type | Brake Disc Rotor |
Replaces | 43818 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.195 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 1 439 392 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 264 mm |
Thickness | 42.1 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 110 mm |
Centering Diameter | 65.5 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Weight | 3.8 kg |
Rotor Style | Solid |
Type | Brake Disc Rotor |
for OE number | 05 69 109 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Type | Sensor, exhaust pressure |
Function | Sensor, exhaust pressure |
Weight | 0.028 kg |
for OE number | 22 77 011 77R |
Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Weight | 0.273 kg |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Type | Stop Light Switch |
Function | Stop Light Switch |
Weight | 0.011 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.1 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 890 mm |
Min. Length | 578 mm |
Pipe Diameter | 60 mm. 70 mm |
Mounting points diameter | 20 mm. 16 mm |
Piston conrod diameter | 16 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Solenoid Valve |
Type | Solenoid Valve |
Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Lock System | with double sealing |
Operating Mode | Electric |
Number of Connectors / Ports | 5 |
Paired article numbers | 177556 |
Weight | 0.692 kg |
Additional Information | with adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Thermoplastic polyester elastomer |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 30 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle |
Length | 107 mm |
Weight | 0.216 kg |
Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179944)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | Shock Absorber, driver cab suspension |
Placement on Vehicle | Rear |
Function | Shock Absorber, driver cab suspension |
Operating Mode | Mechanical |
Weight | 4.0 kg |
Mounting points diameter | 14 mm |
Pipe Diameter | 45 mm |
Max. Length | 429 mm |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Type | Brake Caliper |
Paired article numbers | 181772 |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023