Important compatibility info
Height | 230 mm |
Filter type | Filter Insert |
Inner diameter 1 | 74 mm |
Weight | 0.37 kg |
Type | Air Filter |
Function | Air Filter |
Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 44 mm |
Outer diameter | 78 mm |
Inner diameter | 43 mm |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Weight | 0.85 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 480 N |
Housing Diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Stroke | 215 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Housing length | 308 mm |
Placement on Vehicle | both sides |
Length | 556 mm |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 293 mm |
Function | Air Filter |
Width | 196 mm |
Filter type | Filter Insert |
Weight | 0.28 kg |
Type | Air Filter |
Height | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41748 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Cone Size 2 | 17 mm |
Weight | 3.31 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with rubber mounts |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 184751 |
Weight | 2.567 kg |
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 25 mm |
Weight | 0.08 kg |
Material | Rubber |
Placement on Vehicle | Front Axle |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 0.98 kg |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left |
Length | 290 mm |
Paired article numbers | 43560 |
Weight | 0.416 kg |
External Thread Size | M12 x 1,75 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 44342 |
Function | Tie Rod |
Weight | 1.01 kg |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (14170)
- 1x Febi Bellow Kit, steering (37764)
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 660 mm |
Material | Steel |
Steering arm type | Trailing Arm |
Bore Diameter | 16.6 mm |
Weight | 6.850 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Placement on Vehicle | Rear, both sides |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Max. Length | 297 mm |
Min. Length | 212 mm |
Pipe Diameter | 45 mm |
Mounting points diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Hose Length | 370 mm |
Placement on Vehicle | Upper Left |
Outer diameter | 33 mm |
Inner diameter | 26 mm |
Function | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2044 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 11 |
Weight | 0.352 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 179140 |
Number of Connectors / Ports | 2 |
Weight | 0.01 kg |
Placement on Vehicle | Rear Axle Left |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Length | 2035 mm |
Weight | 0.242 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 46 mm |
Inner diameter | 23 mm |
Function | Mounting, stabiliser bar |
Width | 48 mm |
Length | 46 mm |
Placement on Vehicle | Rear Axle |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.072 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Weight | 0.05 kg |
Operating Mode | Electric |
Function | Knock Sensor |
Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rims | for light alloy rims, for steel rims |
Outer diameter | 23 mm |
Material | Steel |
Screw length below head | 27 mm |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Quality/ Grade | 8.8 |
Bolt Head/Nut Design | Male Hex |
Thread Length | 22 mm |
Surface | Zinc-coated |
Colour | Silver |
Spanner Size | 17 |
Length | 51 mm |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Weight | 0.074 kg |
External Thread Size | M14 x 1,5 |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 29 |
Number of Connectors / Ports | 2 |
Switch Point | 95 °C |
Function | Temperature Switch, radiator fan |
Weight | 0.055 kg |
External Thread Size | M22 x 1,5 |
Type | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023