Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1734 mm |
| Width | 35 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Thickness | 103 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.91
Important compatibility info
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Function | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.50
Important compatibility info
| Placement on Vehicle | Front Axle |
| Spanner Size | 36 |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Thread Size | M24 x 1,5 |
| Length | 775 mm |
| Rod/Strut | Push Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.31
Important compatibility info
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.58
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.68
Important compatibility info
| Length | 247 mm |
| External Thread Size | M12 x 1, M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.26
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 120 mm |
| Material | Steel |
| Outer diameter | 27 mm. 70 mm |
| Spanner Size | 36 |
| Rod/Strut | Guide Rod |
| Colour | Grey |
| Thread Length | 85 mm |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.39
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 37470 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.53
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.40
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48181 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.46
Important compatibility info
| Colour | Black |
| Function | Intake Hose, air filter |
| Material | Plastic |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.53
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 207 mm |
| Paired article numbers | 109584 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.77
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Cast Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£55.96
Important compatibility info
| Width | 67 mm |
| Outer diameter | 130 mm. 37 mm |
| Inner diameter | 24 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.72
Important compatibility info
| Inner diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Metal |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.45
Important compatibility info
| Function | Brake Valve, service brake |
| Port / Connector type | Voss 232 NG8 |
| Length | 190 mm |
| Width | 130 mm |
| Number of Connectors / Ports | 4 |
| Type | Brake Valve, service brake |
| Distance of fastening bolts | 99 mm |
| Height | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£293.52
Important compatibility info
| Length | 260 mm |
| Height | 53 mm |
| Width | 168 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.21
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 340 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.03
Important compatibility info
| Inner diameter | 57.5 mm |
| Outer diameter | 88 mm. 100 mm |
| Length | 95 mm |
| Placement on Vehicle | Lower Front Axle, inner, Rear Axle Lower, Rear Axle Upper |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.38
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.04
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 144 mm |
| Height | 42 mm |
| Length | 344 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.65
Important compatibility info
| Type | Spring Pack |
| Length | 694 mm. 674 mm |
| Placement on Vehicle | Rear Axle |
| Number of spring leaves | 1 |
| Width | 70 mm |
| Spring Design | Leaf spring |
| Function | Spring Pack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£108.55
Important compatibility info
| Cone Size | 13.5 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.97
Important compatibility info
| Placement on Vehicle | transmission sided, Left |
| Length | 240 mm |
| Width | 205 mm |
| Thickness | 100 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.30
Important compatibility info
| Function | Seal, fuel filter |
| Type | Seal, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.36
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182329 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1210 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.57
Important compatibility info
| Capacity | 15 l |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 206 mm |
| Operating Pressure | 14.5 bar |
| Type | Air Tank, compressed-air system |
| Material | Steel |
| Length | 513 mm |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Replaces | 36419 |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 190 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HR |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide Rails Kit, timing chain (30279)
- 1x Febi Timing Chain (33902)
- 1x Febi Tensioner, timing chain (26750)
£153.15
Important compatibility info
| Length | 1890 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 11 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.90
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Ball Joint, axle strut |
| Function | Ball Joint, axle strut |
| Extra Description | ProKit |
| Rod/Strut | Guide Rod |
| Internal Thread Size | M14 x 1,5 |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.19
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178406 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.92
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.14
Important compatibility info
| Function | Oil Filter |
| Height | 131 mm |
| Outer diameter | 66 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.80
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.02
Important compatibility info
| Bore Diameter | 19 mm |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 5Q0 721 261 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.84
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 55227259 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.21
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 179254 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.53
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 17.5 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.15
Important compatibility info
| Function | Slave Cylinder, clutch |
| Bore Diameter | 19.5 mm |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.00
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.19
Important compatibility info
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£114.66
Important compatibility info
| Length | 160 mm |
| Surface | Phosphatized |
| Thread Length | 94 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 10.9 |
| Function | Cylinder Head Bolt |
| Screw length below head | 147 mm |
| Spanner Size | E14 |
| External Thread Size | M11 x 1,5 |
| Type | Cylinder Head Bolt |
| Number of screws | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.86
Important compatibility info
| Function | Compressor, compressed-air system |
| Type | Compressor, compressed-air system |
| for OE number | 50 10 339 859 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£478.17
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 1375 mm |
| Additional Information | with nuts |
| Outer diameter | 62 mm |
| Thread Length | 98 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.65
Important compatibility info
| Fill Medium | Brake Fluid |
| Bore Diameter | 22.22 mm |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.82
Important compatibility info
| Bore Diameter | 19 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.22
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.12
Important compatibility info
| Bore Diameter | 21 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| for OE number | 001 295 91 06 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.80
Important compatibility info
| for OE number | 81.30550.0082 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.49
Important compatibility info
| Height | 164 mm |
| Outer diameter | 136 mm |
| Inner diameter | 111 mm |
| Function | Air Dryer Cartridge, compressed-air system |
| Internal Thread Size | M41 x 2 |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with seal ring, with integrated oil separator |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023